McMaster-Carr logo
    Filter by
    Color
    Manufacturer Model Number
    Locking Strength
    Consistency
    Begins to Harden
    Manufacturer
    Breakaway Torque
    Reaches Full Strength
    Military Specifications Met
    Specifications Met
    Cure Type
    For Maximum Thread Diameter
    Mixing Required
    Clarity
    Minimum Temperature
    Formulation
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    4 Products

    Threadlockers

    Image of Product. Front orientation. Threadlockers. Threadlockers, Bottle.

    Bottle

    Image of Product. Front orientation. Threadlockers. Threadlockers, Single-Use Capsule.

    Single-Use

    Capsule

    The most commonly used threadlockers, these liquids prevent loosening due to vibration, bending, or improper torque. You only need a few drops to evenly coat threads. As you twist parts together, exposure to air is blocked and the threadlocker begins to harden.
    Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes; and cadmium and zinc coatings.
    High Locking Strength—Keep fasteners firmly in place in motors, pumps, and other applications subjected to heavy shock and vibration. Breaking the bond of these threadlockers requires a propane torch, heat gun, or induction heater. As a result, they shouldn't be used in setups that you disassemble often.
    Thick Liquid—Fill larger gaps than thin liquids, so they're best for coarse or worn threads.
    Military Specifications Met—Mil. Spec. threadlockers are manufactured and tested to strict U.S. military standards.
    Container
    Mfr. Model
    No.
    Size
    Type
    Begins
    to Harden
    Color
    Breakaway
    Torque
    Temp. Range
    Consistency
    Viscosity
    Mil. Specs.
    Met
    Reaches Full
    Strength
    Each
    High Locking Strength
     
    Loctite®
    2620.02 fl. oz.Single-Use Capsule5 min.Red190 in·lbf-65° F to 300° FThick Liquid2,400 cPMIL-S-4616324 hr.00000000000000
    2620.34 fl. oz.Bottle5 min.Red190 in·lbf-65° F to 300° FThick Liquid2,400 cPMIL-S-4616324 hr.00000000000000
    2621.69 fl. oz.Bottle5 min.Red190 in·lbf-65° F to 300° FThick Liquid2,400 cPMIL-S-4616324 hr.00000000000000
    2628.45 fl. oz.Bottle5 min.Red190 in·lbf-65° F to 300° FThick Liquid2,400 cPMIL-S-4616324 hr.000000000000000
     
    back to top