Filter by
Manufacturer Model Name
For Use On
Begins to Harden
Manufacturer
Container Type
Reaches Full Strength
Cure Type
Mix Ratio
Material
Formulation
Type
Consistency
Color
Adhesive Type
Shear Strength
Approximate Linear Coverage @ Bead Diameter
DFARS Specialty Metals
Elongation
Export Control Classification Number (ECCN)
Minimum Temperature
REACH
RoHS
Fitting Connection
Clarity
Manufacturer Model Number
About Structural Adhesives
More
Toughened Acrylic Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
MA310 bonds dissimilar materials.
Plexus Adhesives
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| MA310 | 31500 | 1.58 | Cartridge | 15 min. | 24 hrs. | 3,000 | 15 | 1:1 | Thick Liquid (55,000 cP) | -65° to 250° | Light Yellow | Metal, Metal to Plastic, Plastic, Plastic to Composites, Plastic to Masonry, Composites, Masonry, Wood | 00000000 | 000000 |