Filter by
Manufacturer Model Number
Container Type
Manufacturer
Peel Strength
Container Size
Minimum Temperature
Adhesive Type
Cure Type
Shear Strength
Consistency
Maximum Temperature
Reaches Full Strength
Mixing Required
Begins to Harden
Formulation
Type
Fitting Connection
Color
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
Impact-Resistant Epoxy Structural Adhesives
 |
Cartridge |
Mixed with rubber for resilient bonds that withstand sudden stress, shock, and vibration better than standard epoxies. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
3M | |||||||||||||||
Scotch-Weld | |||||||||||||||
| DP460 | 1.69 | Cartridge | 60 | 24 | 2,500 | 60 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A26 | 000000 | ||
| DP460 | 6.76 | Cartridge | 60 | 24 | 2,500 | 60 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A85 | 000000 | ||
| DP460 | 13.5 | Cartridge | 60 | 24 | 2,500 | 60 | 2:1 | Thick Liquid | 30,000 | -65 to 350 | Composite, Metal, Plastic | 7467A416 | 000000 | ||
