Filter by
Manufacturer
Container Type
Shear Strength
Manufacturer Model Number
Begins to Harden
Adhesive Type
Type
Peel Strength
Container Size
Color
Mix Ratio
Cure Type
Maximum Temperature
Formulation
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Fitting Connection
REACH
RoHS
Viscosity
Approximate Linear Coverage @ Bead Diameter
Manufacturer Model Name
Minimum Temperature
Clarity
About Structural Adhesives
More
High-Strength Acrylic Structural Adhesives
With excellent shear strength, these acrylics form stronger bonds than our standard acrylic structural adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP8407NS and DP8410NS are nonsagging, so they won't drip from vertical or overhead surfaces. They contain 0.01" glass beads to prevent adhesive from squeezing out during clamping and give a consistent bond thickness.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||||
| DP8410NS | 1.52 | Cartridge | 10 min. | 24 hrs. | 3,900 | 60 | 10:1 | Thick Liquid (60,000 cP) | -40° to 280° | Green | Metal, Plastic, Composites | 0000000 | 000000 |