The cleanest, safest way to blast. These blasters turn liquid CO₂ into dry ice pellets that remove paint, grease, and dirt—without releasing harmful abrasive media into the surrounding air. Since the pellets turn to gas on contact, there's no media left behind to clean up.

Ideal for light surface prep on metals, the dry ice pellets won't scratch or etch your material. Adjust the pressure and spray width for small or large surfaces, and fine-tune your settings in real time using feedback from the display. Do a test run before using these blasters on soft plastics, since the pellets may leave behind a texture. Opt for a blasting setup with conventional media for tough removal of heavy coatings, corrosion, or scale.

You don't need to order pellets to get started. The built-in pelletizer converts liquid CO₂ into blasting media as you work. Connect a 50 lb. or 75 lb. CO₂ tank with siphon tubes (sold separately). The system draws CO₂ only when you pull the trigger, so quick jobs won't drain your tank. Any unused CO₂ can be stored for later jobs. Set these blasters up in any well-ventilated space.

When super glue becomes a super mess. These removers clean unwanted beads or drops of instant-bond adhesives, even if they’re already cured. Or you can use them to soak bonded parts to separate them. Keep in mind, they can damage paint, coatings, and finishes, so use them with care.

Remove adhesives and residue from a broad range of surfaces. These removers are effective on common adhesives, such as those found on labels and tape.