McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    37 Products
    About Composites
    industrial info icon

    Compare our offering of composites to find the right material for you.

    High-Temperature Garolite G-11 Rods

    Image of Product. Front orientation. Garolite. High-Temperature Garolite G-11 Rods.
    These Garolite G-11 rods offer higher strength and better heat resistance than Garolite G-10/FR4 rods. They are suitable for continuous use in elevated temperatures and retain at least 50% of their structural strength at temperatures above 300° F. Made of an epoxy resin with fiberglass fabric reinforcement, Garolite G-11 is sometimes called epoxy-grade industrial laminate and phenolic. Rods vary in shade from beige to light green.
    Temp.
    Dia.
    Dia. Tolerance
    Min.
    Max.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Flammability
    Rating
    1 ft.
    4 ft.
     
    Green
    1/16"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K71
    00000
    000000
    1/8"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K72
    0000
    00000
    3/16"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K73
    0000
    00000
    1/4"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K74
    0000
    00000
    5/16"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K75
    0000
    00000
    3/8"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K76
    0000
    00000
    7/16"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K77
    00000
    00000
    1/2"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K78
    00000
    00000
    5/8"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K79
    00000
    00000
    3/4"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K81
    00000
    000000
    7/8"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K82
    00000
    000000
    1"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K83
    00000
    000000
    1 1/4"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K84
    00000
    000000
    1 3/8"-0.003" to 0.003"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K85
    00000
    000000
    1 1/2"-0.003" to 0.003"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K86
    00000
    000000
    2"-0.003" to 0.003"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		8638K87
    000000
    000000
     

    Flame-Retardant High-Temperature Garolite G-11/FR5 Tubes

    Image of Product. Front orientation. Garolite. Flame-Retardant High-Temperature Garolite G-11/FR5 Tubes.
    A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4. They keep at least 50% of their structural strength at temperatures above 300° F. The tubes are made of a flame-retardant epoxy resin that is reinforced with fiberglass fabric.
    Garolite G-11/FR5 is also known as epoxy fiberglass, epoxy-grade industrial laminate, and phenolic.
    Temp.
    36"
    OD
    OD Tolerance
    ID
    ID Tolerance
    Min.
    Max.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Each
    1/32" Thick Wall
     
    Yellow
    1/4"-0.005" to 0.005"3/16"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N11000000
    5/16"-0.005" to 0.005"1/4"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N1200000
    3/8"-0.005" to 0.005"5/16"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N1300000
     
    1/16" Thick Wall
     
    Yellow
    5/16"-0.005" to 0.005"3/16"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N1400000
    1/2"-0.005" to 0.005"3/8"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N1500000
    3/4"-0.005" to 0.005"5/8"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N16000000
    1"-0.005" to 0.005"7/8"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N17000000
    1 1/8"-0.005" to 0.005"1"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N18000000
     
    1/8" Thick Wall
     
    Yellow
    1/2"-0.005" to 0.005"1/4"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N19000000
    3/4"-0.005" to 0.005"1/2"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N21000000
    1"-0.005" to 0.005"3/4"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N22000000
    1 1/4"-0.005" to 0.005"1"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N23000000
    1 3/4"-0.005" to 0.005"1 1/2"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N24000000
    2 1/2"-0.008" to 0.008"2 1/4"-0.008" to 0.008"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N25000000
     
    3/16" Thick Wall
     
    Yellow
    3/4"-0.005" to 0.005"3/8"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N26000000
    1"-0.005" to 0.005"5/8"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N27000000
    1 3/8"-0.005" to 0.005"1"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N28000000
     
    1/4" Thick Wall
     
    Yellow
    1"-0.005" to 0.005"1/2"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N29000000
    1 1/4"-0.005" to 0.005"3/4"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N31000000
     
    1/2" Thick Wall
     
    Yellow
    2 1/2"-0.005" to 0.005"1 1/2"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N32000000
    3"-0.008" to 0.008"2"-0.008" to 0.008"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No5184N33000000
     
    back to top