McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    194 Products
    About Composites
    industrial info icon

    Compare our offering of composites to find the right material for you.

    High-Temperature Garolite G-11 Sheets and Bars

    Offering higher strength and better heat resistance than Garolite G-10/FR4, these Garolite G-11 sheets and bars are suitable for continuous use in elevated temperatures. They retain at least 50% of their structural strength at temperatures above 300° F. Made of an epoxy resin with fiberglass fabric reinforcement, Garolite G-11 is sometimes called epoxy-grade industrial laminate and phenolic.
    Sheet
    Image of Product. Front orientation. Contains MultipleImages. Garolite. High-Temperature Garolite G-11 Sheets and Bars.
    Temp.
    6" × 6"
    12" × 12"
    12" × 24"
    24" × 24"
    24" × 36"
    36" × 48"
    Min.
    Max.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Flammability
    Rating
    Each
    Each
    Each
    Each
    Each
    Each
    1/32" Thick (-0.005" to 0.005")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		———00000000000000000000000000000000000000000000000000000000000000000000000
     
    1/16" Thick (-0.0075" to 0.0075")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		———0000000000000000000000000000000000000000000000000000000000000000000
     
    1/8" Thick (-0.012" to 0.012")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		0000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    3/16" Thick (-0.019" to 0.019")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    1/4" Thick (-0.022" to 0.022")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		0000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    5/16" Thick (-0.026" to 0.026")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		0000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    3/8" Thick (-0.03" to 0.03")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		0000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    1/2" Thick (-0.036" to 0.036")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		00000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    3/4" Thick (-0.043" to 0.043")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		0000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    1" Thick (-0.049" to 0.049")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		00000000000000000000000000000000000000000000000000000000———0———0
     
    Bar
    Image of Product. Front orientation. Contains MultipleImages. Garolite. High-Temperature Garolite G-11 Sheets and Bars.
    Temp.
    1" × 24"
    1" × 48"
    1 1/2" × 24"
    1 1/2" × 48"
    2" × 24"
    2" × 48"
    Min.
    Max.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Flammability
    Rating
    Each
    Each
    Each
    Each
    Each
    Each
    1/8" Thick (-0.012" to 0.012")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    1/4" Thick (-0.022" to 0.022")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    1/2" Thick (-0.036" to 0.036")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		00000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    3/4" Thick (-0.043" to 0.043")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		0000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    1" Thick (-0.049" to 0.049")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		00000000000000000000000000000000000000000000000000000000000000000000000000000000000
     

    Composite Material Selector Packs

    Image of Product. Front orientation. Garolite. Composite Material Selector Packs.
    Includes one piece of each material listed.
    Dia.
    No. of
    Pieces
    Material Grade
    Each
    1/32" Thick
    2"10GPO3 Fiberglass, Garolite CE, Garolite G-3, Garolite G-7, Garolite G-9, Garolite G-10, Garolite G-11, Garolite LE, Garolite XX, Garolite XXX000000000000
     

    Flame-Retardant High-Temperature Garolite G-11/FR5 Tubes

    Image of Product. Front orientation. Garolite. Flame-Retardant High-Temperature Garolite G-11/FR5 Tubes.
    A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4. They keep at least 50% of their structural strength at temperatures above 300° F. The tubes are made of a flame-retardant epoxy resin that is reinforced with fiberglass fabric.
    Garolite G-11/FR5 is also known as epoxy fiberglass, epoxy-grade industrial laminate, and phenolic.
    Temp.
    36"
    OD
    OD Tolerance
    ID
    ID Tolerance
    Min.
    Max.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Each
    1/32" Thick Wall
     
    Yellow
    1/4"-0.005" to 0.005"3/16"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    5/16"-0.005" to 0.005"1/4"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No000000000000
    3/8"-0.005" to 0.005"5/16"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No000000000000
     
    1/16" Thick Wall
     
    Yellow
    5/16"-0.005" to 0.005"3/16"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No000000000000
    1/2"-0.005" to 0.005"3/8"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No000000000000
    3/4"-0.005" to 0.005"5/8"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    1"-0.005" to 0.005"7/8"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    1 1/8"-0.005" to 0.005"1"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
     
    1/8" Thick Wall
     
    Yellow
    1/2"-0.005" to 0.005"1/4"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    3/4"-0.005" to 0.005"1/2"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    1"-0.005" to 0.005"3/4"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    1 1/4"-0.005" to 0.005"1"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    1 3/4"-0.005" to 0.005"1 1/2"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    2 1/2"-0.008" to 0.008"2 1/4"-0.008" to 0.008"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
     
    3/16" Thick Wall
     
    Yellow
    3/4"-0.005" to 0.005"3/8"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    1"-0.005" to 0.005"5/8"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    1 3/8"-0.005" to 0.005"1"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
     
    1/4" Thick Wall
     
    Yellow
    1"-0.005" to 0.005"1/2"-0.003" to 0.003"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    1 1/4"-0.005" to 0.005"3/4"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
     
    1/2" Thick Wall
     
    Yellow
    2 1/2"-0.005" to 0.005"1 1/2"-0.004" to 0.004"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
    3"-0.008" to 0.008"2"-0.008" to 0.008"Not Rated35535,00010Rockwell M115
    (Extra Hard)    		No0000000000000
     

    Static-Dissipative Multipurpose Flame-Retardant G-11/FR5 Garolite Sheets

    Image of Product. Front orientation. Garolite. Static-Dissipative Multipurpose Flame-Retardant G-11/FR5 Garolite Sheets.
    Offering higher strength and better heat resistance than Garolite G-10/FR4, these Garolite G-11/FR 5 sheets are suitable for continuous use in elevated temperatures. With a black coating that reduces static electricity, these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment. The coating is cured, so it won’t chip or peel off. These sheets are made of flame-resistant epoxy resin and are easier to machine than other glass-cloth phenolics. A fiberglass fabric reinforcement keeps them from breaking or cracking when bent. Sheets vary in shade from yellow-brown to light green.
    12" × 12"
    12" × 24"
    24" × 24"
    24" × 36"
    36" × 48"
    48" × 96"
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Flammability
    Rating
    Each
    Each
    Each
    Each
    Each
    Each
    1/16" Thick (-0.008" to 0.008")
     
    Yellow
    35035,000 to 50,0005.5 to 12Rockwell M110
    (Extra Hard)    		NoUL 94 V-0
    		000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    3/16" Thick (-0.019" to 0.019")
     
    Yellow
    35035,000 to 50,0005.5 to 12Rockwell M110
    (Extra Hard)    		NoUL 94 V-0
    		000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    1/4" Thick (-0.022" to 0.022")
     
    Yellow
    35035,000 to 50,0005.5 to 12Rockwell M110
    (Extra Hard)    		NoUL 94 V-0
    		0000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    3/8" Thick (-0.03" to 0.03")
     
    Yellow
    35035,000 to 50,0005.5 to 12Rockwell M110
    (Extra Hard)    		NoUL 94 V-0
    		0000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     
    1/2" Thick (-0.036" to 0.036")
     
    Yellow
    35035,000 to 50,0005.5 to 12Rockwell M110
    (Extra Hard)    		NoUL 94 V-0
    		0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     

    High-Temperature Garolite G-11 Rods

    Image of Product. Front orientation. Garolite. High-Temperature Garolite G-11 Rods.
    These Garolite G-11 rods offer higher strength and better heat resistance than Garolite G-10/FR4 rods. They are suitable for continuous use in elevated temperatures and retain at least 50% of their structural strength at temperatures above 300° F. Made of an epoxy resin with fiberglass fabric reinforcement, Garolite G-11 is sometimes called epoxy-grade industrial laminate and phenolic. Rods vary in shade from beige to light green.
    Temp.
    Dia.
    Dia. Tolerance
    Min.
    Max.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Flammability
    Rating
    1 ft.
    4 ft.
     
    Green
    1/16"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    00000
    000000
    1/8"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    0000
    00000
    3/16"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    0000
    00000
    1/4"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    0000
    00000
    5/16"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    0000
    00000
    3/8"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    0000
    00000
    7/16"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    00000
    00000
    1/2"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    00000
    00000
    5/8"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    00000
    00000
    3/4"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    00000
    000000
    7/8"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    00000
    000000
    1"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    00000
    000000
    1 1/4"-0.001" to 0.001"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    00000
    000000
    1 3/8"-0.003" to 0.003"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    00000
    000000
    1 1/2"-0.003" to 0.003"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    00000
    000000
    2"-0.003" to 0.003"Not Rated33537,000 to 58,6007 to 15.3Rockwell M100
    (Extra Hard)    		NoMIL-I-24768/3UL 94 HB
    		0000000
    000000
    000000
     

    Flame-Retardant High-Temperature Garolite G-11/FR5 Sheets

    Image of Product. Front orientation. Garolite. Flame-Retardant High-Temperature Garolite G-11/FR5 Sheets.
    Often used for terminal boards, electrical housings, end plates, and structural components in high temperatures, these sheets are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4. They keep at least 50% of their structural strength at temperatures above 300° F. These sheets are made of a flame-retardant epoxy resin that is reinforced with fiberglass fabric.
    Garolite G-11/FR5 is also known as epoxy fiberglass, epoxy-grade industrial laminate, and phenolic.
    Temp.
    6" × 6"
    12" × 12"
    12" × 24"
    24" × 24"
    24" × 36"
    Min.
    Max.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Each
    Each
    Each
    Each
    Each
    1/16" Thick (-0.008" to 0.008")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/28000000000000000000000000000000000000000000000000000000000000000000
     
    1/8" Thick (-0.012" to 0.012")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/2800000000000000000000000000000000000000000000000000000000000000
     
    3/16" Thick (-0.019" to 0.019")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/2800000000000000000000000000000000000000000000000000000000000000
     
    1/4" Thick (-0.022" to 0.022")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/28000000000000000000000000000000000000000000000000000000000000000
     
    5/16" Thick (-0.026" to 0.026")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/28000000000000000000000000000000000000000000000000000000000000000
     
    3/8" Thick (-0.03" to 0.03")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/28000000000000000000000000000000000000000000000000000000000000000
     
    1/2" Thick (-0.036" to 0.036")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/280000000000000000000000000000000000000000000000000000000000000000
     
    1" Thick (-0.049" to 0.049")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/28000000000000000000000000000000000000000000000000000000000000000000
     
    back to top