Filter by
Thread Size
Grease Fitting Style
For Use With
Overall Height
Height
Shank Length
Shank Type
Finish
Check Valve Type
Dispensing Tip Connection Thread Type
DFARS Specialty Metals
Grease Fittings
Straight with Male Thread
 |
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
Brass—Brass fittings resist corrosion better than zinc-plated steel fittings.
303 Stainless Steel—303 stainless steel fittings are more corrosion resistant than brass fittings and have good chemical resistance.
316 Stainless Steel—316 stainless steel fittings resist corrosion and chemicals better than 303 stainless steel fittings and can be used in saltwater environments.
Ball Check Valve—Fittings with a check valve prevent grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
Pkg. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overall Ht., mm | Thread Lg., mm | Shank Lg., mm | Hex Size, mm | Max. Pressure, psi | Check Valve Type | Specs. Met | Pkg. Qty. | 1-9 | 10-Up | |||
M5 × 0.8 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 15 | 5.5 | 5.5 | 7 | 10,000 | Ball | DIN 71412 | 10 | 1105K13 | 000000 | 000000 | ||
| Brass | 15 | 5.5 | 5.5 | 7 | 1,450 | Ball | DIN 71412 | 5 | 3088K102 | 0000 | 0000 | ||
| 303 Stainless Steel | 15 | 5.5 | 5.5 | 7 | 10,000 | Ball | DIN 71412 | 1 | 2250K24 | 0000 | 0000 | ||
M6 × 0.75 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 15 | 5.5 | 5.5 | 7 | 10,000 | Ball | DIN 71412 | 10 | 1105K16 | 0000 | 0000 | ||
| Zinc-Plated Steel | 24 | 6 | 14 | 7 | 10,000 | Ball | DIN 71412 | 5 | 1095K106 | 00000 | 00000 | ||
| Brass | 15 | 5.5 | 5.5 | 7 | 1,450 | Ball | DIN 71412 | 5 | 3088K103 | 00000 | 0000 | ||
| 303 Stainless Steel | 15 | 5.5 | 5.5 | 7 | 10,000 | Ball | DIN 71412 | 1 | 2250K25 | 0000 | 0000 | ||
M6 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 14 | 5.4 | 5.4 | 7 | 8,000 | Ball | DIN 71412 | 10 | 1105K71 | 0000 | 0000 | ||
| Zinc-Plated Steel | 17.3 | 5.6 | 8.5 | 7 | 1,450 | Ball | DIN 71412 | 10 | 1095K107 | 0000 | 0000 | ||
| Zinc-Plated Steel | 24 | 6 | 14 | 7 | 10,000 | Ball | DIN 71412 | 10 | 1105K11 | 00000 | 00000 | ||
| Zinc-Plated Steel | 29 | 8.3 | 19 | 7 | 10,000 | Ball | DIN 71412 | 5 | 1105K21 | 00000 | 00000 | ||
| Zinc-Plated Steel | 41 | 6 | 31 | 7 | 10,000 | Ball | DIN 71412 | 1 | 1105K31 | 0000 | 0000 | ||
| Brass | 13.5 | 4 | 4 | 7 | 10,000 | Ball | DIN 71412 | 5 | 3088K21 | 0000 | 0000 | ||
| 303 Stainless Steel | 13 | 5.2 | 5.2 | 7 | 8,000 | Ball | — | 3 | 2250K11 | 0000 | 0000 | ||
| 316 Stainless Steel | 15 | 5.5 | 5.5 | 7 | 1,450 | Ball | DIN 71412 | 1 | 4315N12 | 0000 | 0000 | ||
M7 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 15 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K108 | 0000 | 0000 | ||
M8 × 0.75 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 15 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K109 | 0000 | 0000 | ||
M8 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 15 | 5.6 | 5.6 | 9 | 8,000 | Ball | DIN 71412 | 10 | 1105K72 | 0000 | 0000 | ||
| Zinc-Plated Steel | 18.5 | 8.5 | 8.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K111 | 0000 | 0000 | ||
| Brass | 15 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 5 | 3088K26 | 0000 | 0000 | ||
| 303 Stainless Steel | 15 | 5.8 | 5.8 | 9 | 8,000 | Ball | — | 1 | 2250K14 | 0000 | 0000 | ||
| 316 Stainless Steel | 15 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 1 | 4315N13 | 0000 | 0000 | ||
M8 × 1.25 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 15 | 5.8 | 5.8 | 9 | 8,000 | Ball | DIN 71412 | 10 | 1105K81 | 0000 | 0000 | ||
| Brass | 15 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 5 | 3088K27 | 0000 | 0000 | ||
| 303 Stainless Steel | 15 | 5.8 | 5.8 | 9 | 8,000 | Ball | — | 1 | 2250K21 | 0000 | 0000 | ||
| 316 Stainless Steel | 15 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 1 | 4315N14 | 0000 | 0000 | ||
M10 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 15 | 5.9 | 5.9 | 11 | 8,000 | Ball | DIN 71412 | 10 | 1105K73 | 0000 | 0000 | ||
| Brass | 15 | 5.5 | 5.5 | 11 | 10,000 | Ball | DIN 71412 | 5 | 3088K45 | 00000 | 00000 | ||
| 303 Stainless Steel | 15 | 5.8 | 5.8 | 11 | 8,000 | Ball | — | 1 | 2250K17 | 0000 | 0000 | ||
| 316 Stainless Steel | 15 | 5.5 | 5.5 | 11 | 1,450 | Ball | DIN 71412 | 1 | 4315N15 | 00000 | 0000 | ||
M10 × 1.25 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 15 | 5.5 | 5.5 | 11 | 1,450 | Ball | DIN 71412 | 10 | 1095K112 | 0000 | 0000 | ||
M10 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 15 | 5.9 | 5.9 | 11 | 8,000 | Ball | DIN 71412 | 10 | 1105K82 | 0000 | 0000 | ||
| Brass | 15 | 5.5 | 5.5 | 11 | 1,450 | Ball | DIN 71412 | 5 | 3088K104 | 00000 | 00000 | ||
| 303 Stainless Steel | 15 | 5.5 | 5.5 | 11 | 1,450 | Ball | DIN 71412 | 1 | 2250K28 | 0000 | 0000 | ||
| 316 Stainless Steel | 15 | 5.5 | 5.5 | 11 | 10,000 | Ball | DIN 71412 | 1 | 2250K26 | 00000 | 00000 | ||
M12 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17.5 | 6.5 | 6.5 | 14 | 10,000 | Ball | DIN 71412 | 10 | 1105K41 | 00000 | 00000 | ||
M12 × 1.25 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17.5 | 6.5 | 6.5 | 14 | 1,450 | Ball | DIN 71412 | 10 | 1095K113 | 00000 | 00000 | ||
M12 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17.5 | 6.5 | 6.5 | 14 | 10,000 | Ball | DIN 71412 | 5 | 1105K51 | 00000 | 00000 | ||
| 303 Stainless Steel | 17.5 | 6.5 | 6.5 | 14 | 1,450 | Ball | DIN 71412 | 1 | 2250K29 | 0000 | 0000 | ||
M12 × 1.75 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17.5 | 6.5 | 6.5 | 14 | 1,450 | Ball | DIN 71412 | 5 | 1095K114 | 0000 | 0000 | ||
M14 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17.5 | 6.5 | 6.5 | 14 | 10,000 | Ball | DIN 71412 | 5 | 1105K61 | 00000 | 0000 | ||
M14 × 2 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17.5 | 6.5 | 6.5 | 14 | 1,450 | Ball | DIN 71412 | 5 | 1095K115 | 00000 | 0000 | ||
M16 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 7 | 7 | 17 | 1,450 | Ball | DIN 71412 | 5 | 1095K116 | 00000 | 00000 | ||
90° Elbow with Male Thread
 |
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
Brass—Brass fittings resist corrosion better than zinc-plated steel fittings.
303 Stainless Steel—303 stainless steel fittings are more corrosion resistant than brass fittings and have good chemical resistance.
316 Stainless Steel—316 stainless steel fittings resist corrosion and chemicals better than 303 stainless steel fittings and can be used in saltwater environments.
Ball Check Valve—Fittings with a check valve prevent grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
Pkg. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overall Ht., mm | Thread Lg., mm | Shank Lg., mm | Hex Size, mm | Max. Pressure, psi | Check Valve Type | Specs. Met | Pkg. Qty. | 1-9 | 10-Up | |||
M5 × 0.8 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K124 | 000000 | 000000 | ||
M6 × 0.75 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 10 | 1105K18 | 00000 | 00000 | ||
M6 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.5 | 5.5 | 9 | 8,000 | Ball | DIN 71412 | 10 | 1105K76 | 0000 | 0000 | ||
| Brass | 18 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 5 | 3088K24 | 00000 | 00000 | ||
| 303 Stainless Steel | 18 | 5.6 | 5.6 | 9 | 8,000 | Ball | — | 3 | 2250K13 | 00000 | 00000 | ||
| 316 Stainless Steel | 18 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 1 | 4315N18 | 00000 | 00000 | ||
M7 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K125 | 00000 | 00000 | ||
M8 × 0.75 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K126 | 00000 | 00000 | ||
M8 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.5 | 5.5 | 9 | 8,000 | Ball | DIN 71412 | 10 | 1105K77 | 0000 | 0000 | ||
| Brass | 18 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 1 | 3088K35 | 0000 | 0000 | ||
| 303 Stainless Steel | 18 | 5.6 | 5.6 | 9 | 8,000 | Ball | — | 1 | 2250K16 | 0000 | 0000 | ||
M8 × 1.25 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.6 | 5.6 | 9 | 8,000 | Ball | — | 10 | 1105K85 | 0000 | 0000 | ||
| Brass | 18 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 3 | 3088K39 | 00000 | 00000 | ||
| 303 Stainless Steel | 18 | 5.5 | 5.5 | 9 | 8,000 | Ball | — | 1 | 2250K23 | 0000 | 0000 | ||
M10 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 19 | 5.6 | 5.6 | 11 | 8,000 | Ball | DIN 71412 | 10 | 1105K79 | 00000 | 0000 | ||
| Brass | 20 | 5.5 | 5.5 | 11 | 10,000 | Ball | DIN 71412 | 3 | 3088K49 | 00000 | 00000 | ||
| 303 Stainless Steel | 19 | 5.6 | 5.6 | 11 | 8,000 | Ball | — | 1 | 2250K19 | 0000 | 0000 | ||
M10 × 1.25 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 20 | 5.5 | 5.5 | 11 | 1,450 | Ball | DIN 71412 | 10 | 1095K127 | 00000 | 00000 | ||
M10 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 21 | 6.9 | 6.9 | 11 | 8,000 | Ball | — | 10 | 1105K86 | 00000 | 00000 | ||
| 303 Stainless Steel | 20 | 5.5 | 5.5 | 11 | 1,450 | Ball | DIN 71412 | 1 | 2250K31 | 0000 | 0000 | ||
M12 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22 | 6.5 | 6.5 | 14 | 10,000 | Ball | DIN 71412 | 5 | 1105K43 | 00000 | 0000 | ||
M12 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22 | 6.5 | 6.5 | 14 | 10,000 | Ball | DIN 71412 | 5 | 1105K53 | 00000 | 00000 | ||
M12 × 1.75 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22 | 6.5 | 6.5 | 14 | 1,450 | Ball | DIN 71412 | 5 | 1095K128 | 00000 | 00000 | ||
M14 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22 | 6.5 | 6.5 | 14 | 1,450 | Ball | DIN 71412 | 5 | 1095K129 | 00000 | 00000 | ||
M14 × 2 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22 | 6.5 | 6.5 | 14 | 1,450 | Ball | DIN 71412 | 5 | 1095K131 | 00000 | 00000 | ||
67° Elbow with Male Thread
 |
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
Ball Check Valve—Fittings with a check valve prevent grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
Pkg. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overall Ht., mm | Thread Lg., mm | Shank Lg., mm | Hex Size, mm | Max. Pressure, psi | Check Valve Type | Specs. Met | Pkg. Qty. | 1-9 | 10-Up | |||
M6 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 20.5 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K133 | 000000 | 000000 | ||
M8 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 20.5 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K134 | 00000 | 00000 | ||
M8 × 1.25 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 20.5 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K135 | 00000 | 00000 | ||
M10 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22 | 5.5 | 5.5 | 11 | 1,450 | Ball | DIN 71412 | 10 | 1095K136 | 00000 | 00000 | ||
45° Elbow with Male Thread
 |
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
Brass—Brass fittings resist corrosion better than zinc-plated steel fittings.
303 Stainless Steel—303 stainless steel fittings are more corrosion resistant than brass fittings and have good chemical resistance.
316 Stainless Steel—316 stainless steel fittings resist corrosion and chemicals better than 303 stainless steel fittings and can be used in saltwater environments.
Ball Check Valve—Fittings with a check valve prevent grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
Pkg. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overall Ht., mm | Thread Lg., mm | Shank Lg., mm | Hex Size, mm | Max. Pressure, psi | Check Valve Type | Specs. Met | Pkg. Qty. | 1-9 | 10-Up | |||
M5 × 0.8 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 23.5 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 10 | 1105K14 | 000000 | 000000 | ||
M6 × 0.75 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 23.5 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 10 | 1105K17 | 00000 | 00000 | ||
M6 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 23 | 5.5 | 5.5 | 9 | 8,000 | Ball | DIN 71412 | 10 | 1105K74 | 00000 | 0000 | ||
| Brass | 23.5 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 5 | 3088K23 | 00000 | 00000 | ||
| 303 Stainless Steel | 23 | 5.6 | 5.6 | 9 | 8,000 | Ball | — | 3 | 2250K12 | 00000 | 00000 | ||
| 316 Stainless Steel | 23.5 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 1 | 4315N19 | 00000 | 00000 | ||
M7 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 23.5 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K142 | 00000 | 0000 | ||
M8 × 0.75 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 23.5 | 5.5 | 5.5 | 9 | 1,450 | Ball | DIN 71412 | 10 | 1095K143 | 00000 | 0000 | ||
M8 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 23 | 5.5 | 5.5 | 9 | 8,000 | Ball | DIN 71412 | 10 | 1105K75 | 0000 | 0000 | ||
| Brass | 23.5 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 5 | 3088K28 | 00000 | 00000 | ||
| 303 Stainless Steel | 22 | 5.6 | 5.6 | 9 | 8,000 | Ball | — | 3 | 2250K15 | 00000 | 00000 | ||
M8 × 1.25 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 23 | 5.6 | 5.6 | 9 | 8,000 | Ball | — | 10 | 1105K83 | 0000 | 0000 | ||
| Brass | 23.5 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 71412 | 1 | 3088K34 | 0000 | 0000 | ||
| 303 Stainless Steel | 22 | 5.5 | 5.5 | 9 | 8,000 | Ball | — | 1 | 2250K22 | 0000 | 0000 | ||
M10 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 24 | 5.6 | 5.6 | 11 | 8,000 | Ball | DIN 71412 | 10 | 1105K78 | 00000 | 0000 | ||
| Brass | 25 | 5.5 | 5.5 | 11 | 10,000 | Ball | DIN 71412 | 3 | 3088K48 | 00000 | 00000 | ||
| 303 Stainless Steel | 23 | 5.6 | 5.6 | 11 | 8,000 | Ball | — | 1 | 2250K18 | 0000 | 0000 | ||
M10 × 1.25 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 25 | 5.5 | 5.5 | 11 | 1,450 | Ball | DIN 71412 | 10 | 1095K144 | 00000 | 0000 | ||
M10 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 26 | 6.9 | 6.9 | 11 | 8,000 | Ball | — | 10 | 1105K84 | 00000 | 00000 | ||
| 303 Stainless Steel | 25 | 5.5 | 5.5 | 11 | 1,450 | Ball | DIN 71412 | 1 | 4315N21 | 00000 | 00000 | ||
M12 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22.5 | 6.5 | 6.5 | 14 | 1,450 | Ball | DIN 71412 | 5 | 1095K145 | 00000 | 00000 | ||
M12 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22.5 | 6.5 | 6.5 | 14 | 10,000 | Ball | DIN 71412 | 5 | 1105K52 | 00000 | 0000 | ||
M12 × 1.75 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22.5 | 6.5 | 6.5 | 14 | 1,450 | Ball | DIN 71412 | 5 | 1095K146 | 00000 | 00000 | ||
M14 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22.5 | 6.5 | 6.5 | 14 | 1,450 | Ball | DIN 71412 | 5 | 1095K147 | 00000 | 00000 | ||
M16 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 22.5 | 7 | 7 | 17 | 1,450 | Ball | DIN 71412 | 5 | 1095K148 | 00000 | 00000 | ||
90° Wye with Male Thread
 |
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
Ball Check Valve—Fittings with a check valve prevent grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
Pkg. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overall Ht., mm | Thread Lg., mm | Shank Lg., mm | Max. Pressure, psi | Square Size, mm | Check Valve Type | Specs. Met | Pkg. Qty. | 1-9 | 10-Up | |||
M6 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.5 | 5.5 | 1,450 | 9 | Ball | DIN 71412 | 5 | 1095K152 | 000000 | 000000 | ||
M8 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.5 | 5.5 | 1,450 | 9 | Ball | DIN 71412 | 5 | 1095K153 | 00000 | 00000 | ||
M8 × 1.25 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.5 | 5.5 | 1,450 | 9 | Ball | DIN 71412 | 5 | 1095K154 | 00000 | 00000 | ||
M10 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 5.5 | 5.5 | 1,450 | 11 | Ball | DIN 71412 | 5 | 1095K155 | 00000 | 00000 | ||
Grease Fitting Size Identifiers
 |
Take the guesswork out of determining the thread type and size of a grease fitting. Screw the shank of a grease fitting into the labeled holes of these identifiers until you find the one that fits.
For Use With | For Thread Type | For Thread Location | For Thread Size | For Screw Size | For Pipe Size | Wd. | Ht. | Thk. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch/Metric | ||||||||||||
Aluminum | ||||||||||||
| Grease Fittings | NPT, SAE-LT, BSW, UNF, BSPT, BSF, Metric | External | 3/16"-32, 1/4"-20, 1/4"-26, 1/4"-28, 5/16"-18, 5/16"-22, 5/16"-24, 3/8"-20, 3/8"-24, 1/2"-12, M6 × 0.75 mm, M6 × 1 mm, M8 × 1 mm, M8 × 1.25 mm, M10 × 1 mm, M10 × 1.5 mm | 1/8", 1/4" | 1/8, 1/4, 3/8 | 8 1/2" | 3" | 1/4" | 6672N11 | 000000 | ||
Grease Fitting Adapters
Straight
 |
Connection | ||||||
|---|---|---|---|---|---|---|
Male | Female | Material | Each | |||
| Metric M6 × 1 mm | UNF 1/4"-28 | Zinc-Plated Steel | 9006T21 | 00000 | ||
| Metric M6 × 1 mm | NPT 1/8 | Steel | 4936K488 | 00000 | ||
| Metric M8 × 1 mm | UNF 1/4"-28 | Zinc-Plated Steel | 9006T22 | 0000 | ||
| Metric M8 × 1 mm | NPT 1/8 | Brass | 1303K331 | 00000 | ||
| Metric M8 × 1 mm | BSPT 1/8 | Brass | 1303K332 | 00000 | ||
| Metric M8 × 1.25 mm | NPT 1/8 | Brass | 1303K333 | 00000 | ||
| Metric M10 × 1 mm | UNF 1/4"-28 | Zinc-Plated Steel | 9006T23 | 0000 | ||
| Metric M10 × 1 mm | NPT 1/8 | Steel | 4936K485 | 0000 | ||
| Metric M10 × 1.5 mm | NPT 1/8 | Brass | 1303K335 | 0000 | ||
| Metric M12 × 1 mm | NPT 1/8 | Steel | 1303K336 | 00000 | ||
| Metric M16 × 1.5 mm | NPT 1/8 | Brass | 1303K337 | 00000 | ||
Grease Fitting Assortments
 |
Keep a variety of grease fitting shapes, styles, and sizes on hand. These fittings are also known as hydraulic grease fittings.
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
303 Stainless Steel—303 stainless steel fittings are more corrosion resistant than steel fittings.
No. of Pieces | Material | Includes | Thread Type | Container Type | Gender | Max. Pressure, psi | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Threaded Shank | ||||||||||
| 44 | Zinc-Plated Steel | 10 Each M6 × 1 mm Straight Grease Fittings 6 Each M6 × 1 mm 45° Elbow Grease Fittings 6 Each M6 × 1 mm 90° Elbow Grease Fittings 6 Each M8 × 1 mm Straight Grease Fittings 6 Each M8 × 1 mm 90° Elbow Grease Fittings 10 Each M10 × 1 mm Straight Grease Fittings | Metric | Plastic Case | Male | 10,000 | 13085K44 | 000000 | ||
| 44 | 303 Stainless Steel | 10 Each M6 × 1 mm Straight Grease Fittings 6 Each M6 × 1 mm 45° Elbow Grease Fittings 6 Each M6 × 1 mm 90° Elbow Grease Fittings 6 Each M8 × 1 mm Straight Grease Fittings 6 Each M8 × 1 mm 90° Elbow Grease Fittings 10 Each M10 × 1 mm Straight Grease Fittings | Metric | Plastic Case | Male | 10,000 | 13085K66 | 000000 | ||
| 80 | Zinc-Plated Steel | 10 Each 1/8 BSPT Straight Grease Fittings 15 Each M6 × 1 mm Straight Grease Fittings 5 Each M6 × 1 mm 45° Elbow Grease Fittings 5 Each M6 × 1 mm 90° Elbow Grease Fittings 15 Each M8 × 1 mm Straight Grease Fittings 5 Each M8 × 1 mm 45° Elbow Grease Fittings 5 Each M8 × 1 mm 90° Elbow Grease Fittings 10 Each M10 × 1 mm Straight Grease Fittings 5 Each M10 × 1 mm 45° Elbow Grease Fittings 5 Each M10 × 1 mm 90° Elbow Grease Fittings | BSPT, Metric | Plastic Case | Male | 1,450 | 1345K12 | 00000 | ||
| 80 | 303 Stainless Steel | 10 Each 1/8 BSPT Straight Grease Fittings 15 Each M6 × 1 mm Straight Grease Fittings 5 Each M6 × 1 mm 45° Elbow Grease Fittings 5 Each M6 × 1 mm 90° Elbow Grease Fittings 15 Each M8 × 1 mm Straight Grease Fittings 5 Each M8 × 1 mm 45° Elbow Grease Fittings 5 Each M8 × 1 mm 90° Elbow Grease Fittings 10 Each M10 × 1 mm Straight Grease Fittings 5 Each M10 × 1 mm 45° Elbow Grease Fittings 5 Each M10 × 1 mm 90° Elbow Grease Fittings | BSPT, Metric | Plastic Case | Male | 1,450 | 1345K14 | 000000 | ||
| 90 | Zinc-Plated Steel | 30 Each M6 × 1 mm Straight Grease Fittings 10 Each M6 × 1 mm 45° Elbow Grease Fittings 10 Each M6 × 1 mm 90° Elbow Grease Fittings 10 Each M8 × 1 mm Straight Grease Fittings 5 Each M8 × 1 mm 45° Elbow Grease Fittings 5 Each M8 × 1 mm 90° Elbow Grease Fittings 10 Each M10 × 1 mm Straight Grease Fittings 5 Each M10 × 1 mm 45° Elbow Grease Fittings 5 Each M10 × 1 mm 90° Elbow Grease Fittings | Metric | Plastic Case | Male | 5,000 | 1850N6 | 00000 | ||
| 100 | Zinc-Plated Steel | 10 Each M6 × 1 mm Straight Grease Fittings 5 Each M6 × 1 mm 45° Elbow Grease Fittings 5 Each M6 × 1 mm 90° Elbow Grease Fittings 10 Each M8 × 1 mm Straight Grease Fittings 10 Each M8 × 1.25 mm Straight Grease Fittings 5 Each M8 × 1 mm 45° Elbow Grease Fittings 5 Each M8 × 1 mm 90° Elbow Grease Fittings 5 Each M8 × 1.25 mm 45° Elbow Grease Fittings 5 Each M8 × 1.25 mm 90° Elbow Grease Fittings 10 Each M10 × 1 mm Straight Grease Fittings 10 Each M10 × 1.5 mm Straight Grease Fittings 5 Each M10 × 1 mm 45° Elbow Grease Fittings 5 Each M10 × 1 mm 90° Elbow Grease Fittings 5 Each M10 × 1.5 mm 45° Elbow Grease Fittings 5 Each M10 × 1.5 mm 90° Elbow Grease Fittings | Metric | Plastic Case | Male | 8,000 | 1315K14 | 00000 | ||
| 170 | Zinc-Plated Steel | 15 Each 1/8 BSPT Straight Grease Fittings 5 Each 1/8 BSPP Straight Button-Head Grease Fittings 5 Each 1/8 BSPT 45° Elbow Grease Fittings 5 Each 1/8 BSPT 90° Elbow Grease Fittings 10 Each 1/4 BSPT Straight Grease Fittings 5 Each 1/4 BSPP Straight Button-Head Grease Fittings 40 Each M6 × 1 mm Straight Grease Fittings 5 Each M6 × 1 mm 45° Elbow Grease Fittings 5 Each M6 × 1 mm 90° Elbow Grease Fittings 30 Each M8 × 1 mm Straight Grease Fittings 5 Each M8 × 1 mm 45° Elbow Grease Fittings 5 Each M8 × 1 mm 90° Elbow Grease Fittings 20 Each M10 × 1 mm Straight Grease Fittings 5 Each M10 × 1 mm Straight Button-Head Grease Fittings 5 Each M10 × 1 mm 45° Elbow Grease Fittings 5 Each M10 × 1 mm 90° Elbow Grease Fittings | BSPP, BSPT, Metric | Plastic Case | Male | 1,450 | 1345K13 | 000000 | ||
| 170 | 303 Stainless Steel | 15 Each 1/8 BSPT Straight Grease Fittings 5 Each 1/8 BSPP Straight Button-Head Grease Fittings 5 Each 1/8 BSPT 45° Elbow Grease Fittings 5 Each 1/8 BSPT 90° Elbow Grease Fittings 10 Each 1/4 BSPT Straight Grease Fittings 5 Each 1/4 BSPP Straight Button-Head Grease Fittings 40 Each M6 × 1 mm Straight Grease Fittings 5 Each M6 × 1 mm 45° Elbow Grease Fittings 5 Each M6 × 1 mm 90° Elbow Grease Fittings 30 Each M8 × 1 mm Straight Grease Fittings 5 Each M8 × 1 mm 45° Elbow Grease Fittings 5 Each M8 × 1 mm 90° Elbow Grease Fittings 20 Each M10 × 1 mm Straight Grease Fittings 5 Each M10 × 1 mm Straight Button-Head Grease Fittings 5 Each M10 × 1 mm 45° Elbow Grease Fittings 5 Each M10 × 1 mm 90° Elbow Grease Fittings | BSPP, BSPT, Metric | Plastic Case | Male | 1,450 | 1345K15 | 000000 | ||
Flush-Style Grease Fittings
 |  |
Male Straight Style C | Male Straight Style D |
The nipple doesn't stick out, so these fittings fit in tight spaces and won't be damaged if something knocks into them. An integral check valve prevents grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
Straight with Male Thread
| |
Style C | Style D |
Style C—Install Style C with a hex wrench.
Style D—Install Styles A, B, and D with a slotted screwdriver.
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
303 Stainless Steel—303 stainless steel fittings are more corrosion resistant than zinc-plated steel fittings and have good chemical resistance.
Pkg. | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Material | Overall Ht., mm | Thread Lg., mm | Shank Lg., mm | Slot Lg., mm | Hex Size, mm | Max. Pressure, psi | Check Valve Type | Specs. Met | Pkg. Qty. | 1-9 | 10-Up | |||
M5 × 0.8 mm Metric Thread | |||||||||||||||
| C | Zinc-Plated Steel | 9 | 6 | 6 | — | 7 | 1,450 | Ball | DIN 3405 | 5 | 10595K35 | 00000 | 00000 | ||
M6 × 0.75 mm Metric Thread | |||||||||||||||
| C | Zinc-Plated Steel | 9 | 6 | 6 | — | 7 | 1,450 | Ball | DIN 3405 | 5 | 10595K36 | 0000 | 0000 | ||
M6 × 1 mm Metric Thread | |||||||||||||||
| C | Zinc-Plated Steel | 9 | 6 | 6 | — | 7 | 10,000 | Ball | DIN 3405 | 5 | 2421K31 | 0000 | 0000 | ||
| C | 303 Stainless Steel | 9 | 6 | 6 | — | 7 | 1,450 | Ball | DIN 3405 | 1 | 10595K37 | 0000 | 0000 | ||
M8 × 1 mm Metric Thread | |||||||||||||||
| C | Zinc-Plated Steel | 9.5 | 6.5 | 6.5 | — | 9 | 10,000 | Ball | DIN 3405 | 5 | 2421K32 | 0000 | 0000 | ||
| D | Zinc-Plated Steel | 10 | 10 | 10 | 8 | — | 1,450 | Ball | DIN 3405 | 5 | 10595K38 | 00000 | 00000 | ||
M8 × 1.25 mm Metric Thread | |||||||||||||||
| C | Zinc-Plated Steel | 9.5 | 6.5 | 6.5 | — | 9 | 1,450 | Ball | DIN 3405 | 5 | 10595K39 | 0000 | 0000 | ||
M10 × 1 mm Metric Thread | |||||||||||||||
| C | Zinc-Plated Steel | 9.5 | 6.5 | 6.5 | — | 11 | 10,000 | Ball | DIN 3405 | 5 | 2421K33 | 0000 | 0000 | ||
| D | Zinc-Plated Steel | 10 | 10 | 10 | 10 | — | 1,450 | Ball | DIN 3405 | 5 | 10595K41 | 00000 | 00000 | ||
M10 × 1.5 mm Metric Thread | |||||||||||||||
| C | Zinc-Plated Steel | 9.5 | 6.5 | 6.5 | — | 11 | 1,450 | Ball | DIN 3405 | 5 | 10595K42 | 0000 | 0000 | ||
M12 × 1.5 mm Metric Thread | |||||||||||||||
| C | Zinc-Plated Steel | 14 | 9.5 | 9.5 | — | 14 | 1,450 | Ball | DIN 3405 | 5 | 10595K43 | 00000 | 00000 | ||
Button Head Grease Fittings
Straight with Male Thread
 |
Zinc-Plated Steel—Zinc-plated steel fittings have mild corrosion resistance.
303 Stainless Steel—303 stainless steel fittings are more corrosion resistant than zinc-plated steel fittings and have good chemical resistance.
Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | Overall Ht., mm | Thread Lg., mm | Shank Lg., mm | Hex Size, mm | Head Dia., mm | Max. Pressure, psi | Check Valve Type | Specs. Met | 1-9 | 10-Up | |||
M6 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 14 | 6 | 6 | 11 | 10 | 1,450 | Ball | DIN 3404 | 1094K72 | 00000 | 00000 | ||
| Zinc-Plated Steel | 17 | 6 | 6 | 17 | 16 | 10,000 | Ball | DIN 3404 | 2443K39 | 0000 | 0000 | ||
| 303 Stainless Steel | 17 | 6 | 6 | 17 | 16 | 10,000 | Ball | DIN 3404 | 2443K56 | 00000 | 0000 | ||
M8 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 14 | 6 | 6 | 11 | 10 | 1,450 | Ball | DIN 3404 | 1094K73 | 0000 | 0000 | ||
| Zinc-Plated Steel | 17 | 6 | 6 | 17 | 16 | 10,000 | Ball | DIN 3404 | 2443K41 | 0000 | 0000 | ||
| 303 Stainless Steel | 17 | 6 | 6 | 17 | 16 | 10,000 | Ball | DIN 3404 | 2443K57 | 00000 | 00000 | ||
M8 × 1.25 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17 | 6 | 6 | 17 | 16 | 1,450 | Ball | DIN 3404 | 1094K32 | 0000 | 0000 | ||
M10 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 14 | 6 | 6 | 11 | 10 | 1,450 | Ball | DIN 3404 | 1094K74 | 0000 | 0000 | ||
| Zinc-Plated Steel | 17 | 6 | 6 | 17 | 16 | 10,000 | Ball | DIN 3404 | 2443K42 | 0000 | 0000 | ||
| 303 Stainless Steel | 17 | 6 | 6 | 17 | 16 | 10,000 | Ball | DIN 3404 | 2443K58 | 00000 | 00000 | ||
M10 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17 | 6 | 6 | 17 | 16 | 1,450 | Ball | DIN 3404 | 1094K33 | 0000 | 0000 | ||
M12 × 1 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17 | 6 | 6 | 17 | 16 | 1,450 | Ball | DIN 3404 | 1094K34 | 0000 | 0000 | ||
M12 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17 | 6 | 6 | 17 | 16 | 10,000 | Ball | DIN 3404 | 2443K43 | 0000 | 0000 | ||
| 303 Stainless Steel | 17 | 6 | 6 | 17 | 16 | 10,000 | Ball | DIN 3404 | 2443K59 | 00000 | 00000 | ||
M12 × 1.75 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17 | 6 | 6 | 17 | 16 | 1,450 | Ball | DIN 3404 | 1094K35 | 0000 | 0000 | ||
M14 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 17 | 6 | 6 | 17 | 16 | 10,000 | Ball | DIN 3404 | 2443K44 | 0000 | 0000 | ||
M16 × 1.5 mm Metric Thread | |||||||||||||
| Zinc-Plated Steel | 18 | 7 | 7 | 17 | 16 | 10,000 | Ball | DIN 3404 | 2443K45 | 0000 | 0000 | ||
Grease-Dispensing Tips
 |  |  |  |
Style A | Style C | Style H | Style J |
 |  |
Dispensing Tip | Dispensing Tip Connection | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Lg. | Style | Material | Max. Grease Outlet Pressure, psi | Thread Type | Thread Size | Gender | Each | |||
For Standard Grease Fittings | |||||||||||
| A | 1 7/16" | Straight | Steel | 5,800 | Metric | M10 × 1 mm | Female | 1091K64 | 00000 | ||
| C | 1 7/16" | 90° Angle | Steel | 5,800 | Metric | M10 × 1 mm | Female | 1091K65 | 0000 | ||
For 10 mm Button Head Grease Fittings | |||||||||||
| H | 1 1/8" | 90° Angle | Steel | 1,450 | Metric | M10 × 1 mm | Female | 1091K66 | 00000 | ||
For 16 mm Button Head Grease Fittings | |||||||||||
| H | 1 1/8" | 90° Angle | Steel | 1,450 | Metric | M10 × 1 mm | Female | 1091K67 | 00000 | ||
| J | 1 1/8" | Straight | Steel | 1,450 | Metric | M10 × 1 mm | Female | 1091K68 | 00000 | ||
Self-Tapping Grease Fittings for Unthreaded Holes
Straight with Male Thread
 |
Pkg. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Hole Dia., mm | Material | Overall Ht., mm | Shank Lg., mm | Thread Lg., mm | Hex Size, mm | Max. Pressure, psi | Check Valve Type | Pkg. Qty. | 1-9 | 10-Up | |||
M6 × 1 mm Metric Thread | |||||||||||||
| 5.6 to 5.7 | Zinc-Plated Steel | 14 | 5.5 | 5.5 | 7 | 8,000 | Ball | 10 | 8742T31 | 00000 | 00000 | ||
| 5.6 to 5.7 | Zinc-Plated Steel | 15 | 5.5 | 5.5 | 7 | 10,000 | Ball | 10 | 8742T11 | 0000 | 0000 | ||
M8 × 1 mm Metric Thread | |||||||||||||
| 7.6 to 7.7 | Zinc-Plated Steel | 15 | 5.5 | 5.5 | 9 | 10,000 | Ball | 10 | 8742T12 | 0000 | 0000 | ||
M10 × 1 mm Metric Thread | |||||||||||||
| 9.6 to 9.7 | Zinc-Plated Steel | 15 | 5.5 | 5.5 | 11 | 10,000 | Ball | 10 | 8742T13 | 00000 | 0000 | ||
90° Elbow with Male Thread
 |
Pkg. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Hole Dia., mm | Material | Overall Ht., mm | Shank Lg., mm | Thread Lg., mm | Square Size, mm | Max. Pressure, psi | Check Valve Type | Pkg. Qty. | 1-9 | 10-Up | |||
M6 × 1 mm Metric Thread | |||||||||||||
| 5.6 to 5.7 | Zinc-Plated Steel | 18 | 5.5 | 5.5 | 9 | 10,000 | Ball | 10 | 8742T17 | 000000 | 000000 | ||
M8 × 1 mm Metric Thread | |||||||||||||
| 7.6 to 7.7 | Zinc-Plated Steel | 18 | 5.5 | 5.5 | 9 | 10,000 | Ball | 5 | 8742T18 | 00000 | 0000 | ||
M10 × 1 mm Metric Thread | |||||||||||||
| 9.6 to 9.7 | Zinc-Plated Steel | 18 | 5.5 | 5.5 | 11 | 10,000 | Ball | 5 | 8742T19 | 00000 | 00000 | ||
45° Elbow with Male Thread
 |
Pkg. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Hole Dia., mm | Material | Overall Ht., mm | Shank Lg., mm | Thread Lg., mm | Square Size, mm | Max. Pressure, psi | Check Valve Type | Pkg. Qty. | 1-9 | 10-Up | |||
M6 × 1 mm Metric Thread | |||||||||||||
| 5.6 to 5.7 | Zinc-Plated Steel | 20 | 5.5 | 5.5 | 9 | 10,000 | Ball | 10 | 8742T14 | 000000 | 000000 | ||
M8 × 1 mm Metric Thread | |||||||||||||
| 7.6 to 7.7 | Zinc-Plated Steel | 20 | 5.5 | 5.5 | 9 | 10,000 | Ball | 5 | 8742T15 | 00000 | 00000 | ||
M10 × 1 mm Metric Thread | |||||||||||||
| 9.6 to 9.7 | Zinc-Plated Steel | 20 | 5.5 | 5.5 | 11 | 10,000 | Ball | 5 | 8742T16 | 00000 | 00000 | ||
Self-Tapping Flush-Style Grease Fittings for Unthreaded Holes
 |
Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. Use them in tight spaces where protruding fittings won't work. Install with a hex wrench. Fittings can be driven in, but then are not pressure rated. They’re zinc-plated steel for mild corrosion resistance. An integral check valve prevents grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.
Pkg. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Hole Dia., mm | Material | Overall Ht., mm | Shank Lg., mm | Thread Lg., mm | Hex Size, mm | Max. Pressure, psi | Check Valve Type | Specs. Met | Pkg. Qty. | 1-9 | 10-Up | |||
Straight with Male Thread | ||||||||||||||
M6 × 1 mm Metric Thread | ||||||||||||||
| 5.6 to 5.7 | Zinc-Plated Steel | 8.5 | 5.5 | 5.5 | 7 | 10,000 | Ball | DIN 3405 | 5 | 2421K37 | 000000 | 000000 | ||
M8 × 1 mm Metric Thread | ||||||||||||||
| 7.6 to 7.7 | Zinc-Plated Steel | 8.5 | 5.5 | 5.5 | 9 | 10,000 | Ball | DIN 3405 | 3 | 2421K38 | 0000 | 0000 | ||
M10 × 1 mm Metric Thread | ||||||||||||||
| 9.6 to 9.7 | Zinc-Plated Steel | 8.5 | 5.5 | 5.5 | 11 | 10,000 | Ball | DIN 3405 | 1 | 2421K39 | 0000 | 0000 | ||
Flexible Grease Gun Nozzles
 |
Grease Gun Nozzles |
Nozzles have threads on both ends for connecting a grease gun to a dispensing tip.
