McMaster-Carr logo
    Filter by
    System of Measurement
    Height
    Hole Thread Size
    Industrial Info Compare
    Hole Center-to-Center
    Weight
    Thickness
    Material
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Hole Diameter
    Overall Width
    Overall Length
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Squareness Tolerance
    Counterbore Diameter
    Attribute Image
    Heat Treatment
    Total Number of Holes
    Overall Thickness
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    41 Products

    Grid Fixture Plates for Welding

    Image of System. Front orientation. Grid Fixture Plates. Grid Fixture Plates for Welding.
    Build fixturing setups for welding onto these plates. They have 5/8” unthreaded holes with 2” center-to-center spacing, so they’re compatible with clamps, stops, V-blocks, and other components. Made from nitrided steel, they have a hardened surface that resists wear, prevents corrosion, and keeps weld spatter from sticking. They’re easy to maintain and they hold their shape over time. To add resistance to heat and spatter, apply welding antispatter to all the components in your setup.
    Fixture Plates
    Image of Product. Front orientation. Contains Annotated. Grid Fixture Plates. Grid Fixture Plates for Welding, Fixture Plates.
    Overall
    Unthreaded
    Holes
    Lg.
    Wd.
    Thk.
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    Wt.,
    lb.
    Parallel
    Tolerance
    Flatness
    Tolerance
    Each
    Nitrided Steel
    6 5/16"4"5/8"65/8"2"5Not Rated0.02"/2 ft.8914N114000000
     
    Accessories for Grid Fixture Plates
    Fixture Squares
    Image of Product. Style A. Front orientation. Style A.
    Image of Product. Style B. Front orientation. Contains Annotated. Style B.
    Image of Product. Style C. Front orientation. Contains Annotated. Style C.

    Style A

    Style B

    Style C

    Image of Product. Style D. Front orientation. Contains Annotated. Style D.
    Image of Product. Style E. Front orientation. Contains Annotated. Style E.
    Image of Product. Style F (Left Orientation). Front orientation. Contains Annotated. Style F.

    Style D

    Style E

    Style F (Left

    Orientation)

    Image of Product. Style F (Right Orientation). Back orientation. Contains Annotated. Style F.

    Style F (Right Orientation)

    Build fixtures on multiple sides of these squares—you can use them individually or stack them.
    Slots
    Holes
    Tolerance
    Style
    Lg.
    Wd.
    Ht.
    Orientation
    No.
    of
    Shape
    Lg.
    Wd.
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    (A)
    Ctr.-to-Ctr.
    (B)
    Wt.,
    lb.
    Squareness
    per 4"
    Parallel
    Material
    Each
    A2"2"10"—————205/8"1"—50.001"0.002"Nitride-Coated Steel1392N110000000
    B3 3/4"4"3 3/4"—4
    1    		Straight
    Curved    		2"
    2 13/16"    		5/8"
    5/8"    		65/8"2"—5Not RatedNot RatedIron1392N111000000
    C4"4"4"—2Straight2 3/16"5/8"215/8"2"1 7/16"80.001"0.002"Nitride-Coated Steel1392N12000000
    C4"4"8"—2Straight2"5/8"395/8"2"1 7/16"130.001"0.002"Nitride-Coated Steel1392N13000000
    C4"4"12"—2Straight2"5/8"575/8"2"1 7/16"180.001"0.002"Nitride-Coated Steel1392N14000000
    D4"8"24"—2
    4
    2    		Straight
    Straight
    Straight    		4"
    2"
    4"    		5/8"
    5/8"
    5/8"    		1575/8"2"2"53Not RatedNot RatedNitride-Coated Steel1392N11200000000
    D4"8"36"—2
    4
    2    		Straight
    Straight
    Straight    		4"
    2"
    4"    		5/8"
    5/8"
    5/8"    		2355/8"2"2"77Not RatedNot RatedNitride-Coated Steel1392N11300000000
    E6"2"12"—2Straight4"5/8"265/8"1"1"70.002"0.006"Iron1392N15000000
    F8"2"20"Left-Hand Side4
    2
    1    		Straight
    Curved
    Curved    		2"
    2 13/16"
    5 5/8"    		5/8"
    5/8"
    5/8"    		435/8"1"1"15Not RatedNot RatedIron1392N115000000
    F8"2"20"Right-Hand Side4
    2
    1    		Straight
    Curved
    Curved    		2"
    2 13/16"
    5 5/8"    		5/8"
    5/8"
    5/8"    		435/8"1"1"15Not RatedNot RatedIron1392N114000000
    V-Blocks
    Mount V-blocks to the fixture plate to hold round workpieces in place.
    Multiple Studs—V-blocks with multiple studs slot into at least two grid holes, which keeps them from shifting when you move workpieces in or out. They have two rows of mounting holes, so you can position them at a 45° or 90° angle on your grid.
    Pivoting V-Blocks—Pivoting V-blocks can hold both the outer and inner diameter of your workpiece. They can go from cradling the outside of a pipe at 60°, to lying completely flat, to gripping the inside of a pipe at a 60° angle.
    For Max. Workpiece
    Dia.
    Head
    Dia.
    Head
    Lg.
    Head
    Wd.
    Head
    Ht.
    Lg.
    Wd.
    Ht.
    V
    Angle
    V Dp.
    V Wd.
    Stud
    Dia.
    Material
    Machinable
    Includes
    Each
    Single Stud
     
    Image of Product. Fixed with Single Stud. Front orientation. Contains Annotated. V-Blocks. Single Stud, Fixed V-Blocks.

    Fixed with Single Stud

    Fixed V-Blocks
    2 1/2"1 5/8"——21/32"———120°13/32"1 7/16"5/8"Black-Oxide SteelNo—1403N67000000
    8"3 3/16"——1 13/32"———150°19/32"3 1/16"5/8"Black-Oxide SteelNo—1403N6800000
     
    Image of Product. Pivoting with Single Stud. Front orientation. Contains Annotated. V-Blocks. Single Stud, Pivoting V-Blocks.

    Pivoting with Single Stud

    Pivoting V-Blocks
    4"—2 1/8"2"1 1/8"———60°27/32"1"5/8"Zinc-Plated SteelNo—1365N2100000
     
    Pair
    Multiple Studs
     
    Image of Product. Fixed with Multiple Studs. Front orientation. Contains Annotated. V-Blocks. Multiple Studs, Fixed V-Blocks.

    Fixed with Multiple Studs

    Fixed V-Blocks
    4"————8 1/4"2 1/4"2"120°1/2"1 11/16"5/8"Black-Oxide SteelNoFour Mounting Studs8907N111000000
     
    Hold-Down Clamps
    Image of Product. Front orientation. Contains Annotated. Fixture Tables.

    Hold-Down Clamps

    Hold-Down Clamps—Hold-down clamps secure work anywhere on the fixture plate’s surface. The arm slides up and down the body of the clamp, so you can quickly move it into position. Twist the handle to tighten the clamp onto your workpiece.
    Clamping
    Surface
    Material
    Hold-Down Clamps
    Max. Clamping
    Clearance
    Reach
    Lg.
    Holding
    Cap., lb.
    For Hole
    Size
    Type
    Material
    Texture
    Body
    Handle
    Each
    8 1/2"4"4005/8"Swivel PadSteelSmoothSteelSteel1403N87000000
    Side Clamps
    Image of Product. Front orientation. Contains Annotated. Fixture Tables.

    Side Clamps

    Side Clamps—Side clamps press against the side of a workpiece to hold it in place.
    Side Clamps
    Lg.
    Ht.
    Stud
    Dia.
    Material
    Spindle
    Material
    Each
    3 1/2"2"5/8"Black-Oxide SteelAluminum
    		1403N62000000
    Risers
    Image of Product. Front orientation. Fixture Tables. Fixed Riser Height.
    Image of Product. Front orientation. Fixture Tables. Adjustable Riser Height.

    Fixed Riser Height

    Adjustable Riser

    Height

    Risers—Risers hold components above the surface of the fixture plate. Use the hole at the top to attach a V-block or other component.
    Head
    Risers
    Dia.
    Ht.
    Hole
    Dia.
    Stud
    Dia.
    Material
    Each
    Fixed Riser Height
    1 9/16"15/32"5/8"5/8"Black-Oxide Steel1403N6300000
    1 5/8"2"5/8"5/8"Black-Oxide Steel1403N6400000
     
    Adjustable Riser Height
    1 3/4"7/8" to 1 3/16"5/8"5/8"Black-Oxide Steel1403N6600000
    1 3/4"2" to 2 3/4"5/8"5/8"Black-Oxide Steel1403N6500000
     
    Flat Rests
    Image of Product. Front orientation. Flat Rests.
    Flat Rests—Flat rests raise a workpiece off the fixture plate.
    Head
    Flat Rests
    Dia.
    Ht.
    Stud
    Dia.
    Material
    Each
    1"2"5/8"Black-Oxide Steel1403N6100000
    1 5/8"5/8"5/8"Black-Oxide Steel1403N5100000
    Angle Fences
    Image of Product. Front orientation.
    Angle Fences—Angle fences have holes set at commonly used angles, so you can quickly align components in your setup.
    Holes
    Angle Fences
    Lg.
    Wd.
    Ht.
    No.
    of
    Dia.
    Angle Measured
    Range
    Angle
    Increments
    Material
    Each
    10"8"3/8"125/8"0° to 45°5°Black-Oxide Steel1403N117000000
    Right-Angle Brackets
    Image of Product. Front orientation. Contains Annotated.
    Right-Angle Brackets—Right-angle brackets hold work at a precise 90° angle.
    Slot
    Holes
    Right-Angle
    Brackets
    Lg.
    Wd.
    Ht.
    No.
    of
    Lg.
    Wd.
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    Material
    Each
    3 5/8"1 3/16"1 5/8"12"5/8"15/8"—Black-Oxide Steel1403N41000000
    3 5/8"1 3/16"3 5/8"12"5/8"35/8"1"Black-Oxide Steel1403N4200000
    6"1 3/16"3 5/8"15"5/8"35/8"1"Black-Oxide Steel1403N4300000
    6"2"12"15"5/8"115/8"1"Black-Oxide Steel1403N45000000
    Straightedge Stops
    Image of Product. Front orientation. 1 Hole. 6" Long.
    Image of Product. Front orientation. Contains Annotated. 2 Holes. 8" Long.
    Image of Product. Front orientation. Contains Annotated. 4 Holes. 10" Long.

    6" Long

    8" Long

    10" Long

    Straightedge Stops—Straightedge stops mount to the fixture plate to create a reliable reference for alignment.
    Slots
    Holes
    Straightedge
    Stops
    Lg.
    Wd.
    Ht.
    No.
    of
    Lg.
    Wd.
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    (A)
    Ctr.-to-Ctr.
    (B)
    Material
    Each
    6"1 3/16"1/2"13 1/2"5/8"15/8"——Black-Oxide Steel1403N31000000
    8"1 3/16"1/2"22"5/8"25/8"4"—Black-Oxide Steel1403N3200000
    10"1 3/16"1/2"15"5/8"45/8"7"1"Black-Oxide Steel1403N3300000
    Toggle Clamp Mounting Plates
    Image of Product. Front orientation. Contains Annotated.
    Toggle Clamp Mounting Plates—Toggle clamp mounting plates let you position a toggle clamp anywhere on the fixture plate.
    Plate
    Mounting
    Holes
    Toggle Clamp
    Mounting Plates
    Lg.
    Wd.
    Ht.
    No.
    of
    Thread
    Size
    Stud
    Dia.
    Material
    Each
    2 3/4"2 3/8"5/8"4, 4M5, M65/8"Steel1365N31000000
    Fasteners
    Image of System. Fastener and Straightedge Stops. Front orientation. Fixture Tables.

    Fastener and

    Straightedge

    Stops

    Image of Product. Bottom orientation. 5/8" Diameter Stud. Ball-Lock Screw.

    Ball-Lock

    Screw

    Image of Product. Front orientation. 5/8" Diameter Shoulder. Shoulder Screw.

    Shoulder

    Screw

    Fasteners—Fasteners connect components to each other or to the fixture plate.
    Thread
    Head
    Drive
    Each
    Package
    Shoulder
    Lg.
    Size
    Lg.
    Dia.
    Ht.
    Lg.
    Size
    Style
    Material
    Includes
    Each
    Pkg.
    Qty.
    Pkg.
    Shoulder Screws—5/8" Diameter Shoulder (-0.001" to 0")
    1/2"1/2"-13
    		3/4"7/8"3/8"—5/16"Hex
    		Black-Oxide SteelNut, Washer1403N7200000————0
    3/4"1/2"-13
    		3/4"7/8"3/8"—5/16"Hex
    		Black-Oxide SteelNut, Washer1403N730000————0
    7/8"1/2"-13
    		3/4"7/8"3/8"—5/16"Hex
    		Black-Oxide SteelNut, Washer1403N740000————0
    1"1/2"-13
    		3/4"7/8"3/8"—5/16"Hex
    		Black-Oxide SteelNut, Washer1403N750000————0
    1 1/4"1/2"-13
    		3/4"7/8"3/8"—5/16"Hex
    		Black-Oxide SteelNut, Washer1403N760000————0
     
    Ball-Lock Screws—5/8" Diameter Stud
    ———7/8"1/2"7/8" to 1 1/16"1/4"Hex
    		Steel—1403N6900000121403N710000000
     

    Fixture Squares

    Image of Product. Style B. Front orientation. Contains Annotated. Fixture Squares. Fixture Squares, Style B.

    Style B

    Build fixtures on multiple sides of these squares—you can use them individually or stack them. Made from iron or steel, they’re strong and stable for accurate fixturing. They hold up to welding, fabrication, and other demanding applications.
    Slots
    Holes
    Tolerance
    Style
    Lg.
    Wd.
    Ht.
    Plate
    Thk.
    No.
    of
    Shape
    Lg.
    Wd.
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    (A)
    Wt.,
    lb.
    Squareness
    per 4"
    Parallel
    Material
    Each
    B3 3/4"4"3 3/4"1/2"4
    1    		Straight
    Curved    		2"
    2 13/16"    		5/8"
    5/8"    		65/8"2"5Not RatedNot RatedIron1392N1110000000
     

    Fixturing for Parts Inspection

    Image of ProductInUse. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection.
    From towers and brackets to standoffs and supports, these components are the building blocks for your custom fixturing setup. They elevate parts so you can access a variety of angles for measuring and inspecting while protecting your measuring device from hitting the inspection table. You’ll often see them used with coordinate measuring machines (CMMs). They’re not for use in machining applications.
    Positioners
    Image of ProductInUse. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection, Positioners.
    Image of Product. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection, Positioners.
    Positioners secure components anywhere along the length of their slot, similar to drop-in nuts on T-slotted rails. This gives you the flexibility to install components between the threaded holes on plates, brackets, and towers.
    Slots
    Lg.
    Wd.
    Thk.
    Lg.
    Wd.
    Number
    of Holes
    Material
    Includes
    Each
    8-32, 10-32 Hole Thread Size
    3 1/8"1 1/2"1/4"1"9/32"6, 4Steel1/4"-20 Knurled Knob1637N72000000
     

    Setup Blocks

    Create setups with precise angles and accurate spacing for measuring, inspection, or machining. These blocks are precision ground to tight tolerances on all six faces, making them flat, square, and parallel. Made of hardened steel, they resist wear, so they’ll stay precise even with heavy use.
    Blocks with 11 Holes Total
    Image of Product. Front orientation. Contains Annotated. Setup Blocks. Setup Blocks , Blocks with 11 Holes Total .
    Tolerance
    Hole
    Lg.
    Wd.
    Ht.
    Lg.
    Wd.
    Ht.
    Squareness
    Parallel
    Material
    Style (No. of)
    Dia.
    Thread
    Size
    Ctr.-to-Ctr.
    (A)
    Ctr.-to-Ctr.
    (B)
    Counterbore
    Dia.
    Container
    Type
    Pair
    United States Origin
    1"3"2"0.0003"0.0003"0.0003"0.0001"0.0002"Hardened SteelThreaded and Counterbored (5)
    Unthreaded and Counterbored (6)    		11/32"5/16"-18
    		1"1"1/2"Wood Case8630A760000000
     
    back to top