Produce a smooth surface on precise, intricate grinding jobs. These bits are cushioned by rubber, so they create a smoother finish than other bits with similar grits. Made with a diamond abrasive, they last 10 to 20 times longer than rubber-cushioned bits without diamond. Their _3/32" diameter shank and small head allow them to get into intricate spots. Head diameter is measured at the widest point.

Caution: As bit shank is exposed beyond _1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

The extra-sharp abrasive cuts through hard metals faster than other discs. A hook-and-loop mount lets you switch grits and avoid the waste of adhesive-backed discs, which are done after one use. Pair with a compatible sanding tool or backup pad (sold separately).

Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Avoid buildup of soft materials and wasting discs when you need to change grit. The abrasive keeps dust from collecting and the hook-and-loop mount makes these discs reusable, unlike adhesive discs. Pair with a compatible sanding tool or backup pad.

Get more sand for your dollar. These discs have densely packed abrasive to last longer than standard quick-change discs. When they finally wear out, their connector lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.

Prevent clogging and smearing when sanding soft materials. The abrasive won’t trap particles, so these discs stay sharp longer. Press them onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Swap one sanding disc for another in seconds. The connector on these discs twists or snaps into place, so you can get right back to work. Choose the connection style that matches your tool or backup pad.