The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

These discs have a harder abrasive than standard flexible-edge quick-change discs.

Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.

The premium abrasive stays sharp longer.

A special fastener on the back of these discs allows you to easily swap one disc for another.

Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.

A coating prevents dust and debris from building up on the abrasive surface.

Fit these discs over your tool’s arbor to sand stainless steel and hard metals.

Used for stripping, these discs eliminate discoloration from heat buildup.

The premium abrasive stays sharp longer.

A coating prevents dust and debris from building up on the abrasive surface.

Holes in the disc let you see the surface you’re sanding.

Fit these discs over your tool's arbor to sand aluminum, soft metals, and nonmetals.

A coating prevents dust and debris from building up on the abrasive surface.

The premium abrasive stays sharp longer.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

These discs have a long-lasting diamond abrasive.

Made of foam, these discs can conform to contoured shapes, corners, and sharp edges.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Holes allow dust removal when used with a vacuum sander.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

With more flaps than standard discs, these last 30-40% longer.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

A coating prevents dust and debris from building up on the abrasive surface.

Set at an angle and widely spaced, the flaps reach into corners.

Use these discs with commercial floor buffing machines to sand wood floors.

Slits on both ends of the block allow you to attach sheets over the flat or curved side.

Made of foam, these blocks flex to sand around curves.

The flexible edge of the sanding disc overhangs these backup pads.

These pads are designed to channel air flow to the sanding disc for cooler operation, prolonging the life of the disc.

Thread one of these backup pads onto the tool’s arbor, then attach a sanding disc and secure with the disc nut.

Holes in the pad align with holes in the sanding disc for a clearer view of the sanding surface.

Secure the shank into the collet or chuck of a tool.

Holes allow dust removal when used with a vacuum sander.

Thread the stud into the tool's spindle and then press the sanding disc onto the backup pad.