We will reply to your message within an hour.
Use these wheels for light grinding, deburring, and sharpening.
Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.
Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.
A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.
The special shapes of these wheels provide more clearance than typical straight wheels.
The porous bond leaves more space between abrasive grains so heavy amounts of chips and coolant easily flow through.
Typically used with cylindrical, surface, and ID grinders, these wheels are specially designed to grind the inside diameter of workpieces.
Remove material and shape metal cylindrical forms or parts without the need for centers or fixtures.
A good value for everyday use, these wheels offer an economical balance between heavy material removal and long life. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.
Wheels are a blend of aluminum oxide and zirconia alumina, which removes more material and lasts three times as long as our General Purpose Grinding Wheels. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.
A blend of ceramic alumina and zirconia alumina removes material at a 50% faster rate than our Long-Life Grinding Wheels. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.
Made with aluminum oxide in a diamond pattern, these flexible wheels remove mill scale from metal, including pipe, in a single step.
Made with reinforced aluminum oxide, these wheels are designed for light grinding, cutting, and notching in steel pipelines.
A large grinding surface, combined with a thick layer of rough abrasive removes more material than other wheels. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.
The flexible backing on these wheels conforms to curved and rough surfaces.
Heat-dissipating holes reduce material buildup and extend the life of the wheel. Wheels have a semiflexible backing that conforms to curved and rough surfaces.
Multiple layers of nylon mesh embedded with abrasive provide a cushioned grind. Also known as unitized discs or wheels.
The saucer shape lets you hold these wheels at shallower angles than Type 27 wheels, so they’re more comfortable to handle. They are also known as Type 28 wheels and raised-hub wheels.
A blend of cotton laminate and aluminum oxide creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 27 wheels and raised-hub wheels.
Grind a variety of materials, such as metal, fiberglass, and ceramics. Also known as (AVOS) Type 29 wheels, they have an upside-down dish shape for a large contact area.
Use on 7" and 9" angle grinders and sanders to remove paint, rust, and scale from hard surfaces.
Wheels remove more material than other grinding wheels with cotton laminate.
A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.
Quickly remove vinyl, decals, tape, and double-sided molding striping and trim without damaging the surface below.
Grind flat stock and flat surfaces with these segments.
Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.
The bits in these sets have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.
The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
The abrasive grains in these discs are blended with rubber, which cushions during grinding to produce a smoother surface texture than other discs with similar grits. Discs attach to your grinder with a shank.
A diamond abrasive that's bonded to a rubber cushioning makes these bits last 10 to 20 times longer than rubber-cushioned bits without diamond. Because they’re cushioned during grinding, these bits produce a smoother surface texture than other bits with similar grits.
Produce a smooth surface on precise, intricate grinding jobs.
Set contains a selection of our most popular hex-shank grinding bits. Use them in any drill chuck that accepts a 1/4" hex shank.
Use bits in any drill chuck that accepts a 1/4" hex shank.
Similar to diamond, boron nitride is harder than aluminum oxide and lasts longer. Bits are also known as jig grinding pins and mandrels.
Sets contain an assortment of tools for grinding, sanding, and cutting on small surface areas.
Each set contains a selection of our most popular grinding bits.
The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.
Made of ceramic alumina, these bits prevent material and heat buildup better than bits made of boron nitride and aluminum oxide when used on steel, stainless steel, iron, and titanium.
Made of cotton fiber layers embedded with aluminum-oxide grains, these bits grind and finish in one step.
Finish the edges of metal, polymer, and plastic 3D printed parts with the bits, burs, wheels, and brushes in these kits.
The diamond abrasive in these bits is extremely hard and can grind metal, ceramic, and plastic.
Grind a variety of materials, from metal to ceramic and plastic, in precise, detailed jobs.
Best for intricate, precise grinding jobs on metal, ceramic, and plastic, these sets include diamond abrasive bits with different head shapes.
Swap accessories quickly and safely without tools.
Longer lasting than grinding bits, these abrasive cones remove heavy amounts of material and leave a rough surface texture. They have a threaded insert that attaches to the spindle on a straight grinder. Use in corners and inside castings.
With more flaps than standard discs, these last 30-40% longer.
Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.
These discs have a harder abrasive than standard flap sanding discs.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating more consistent finishes.
A heavy duty backing plate provides more support than standard discs for heavy material removal.
The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.
The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.
The flaps wrap around the outer edge of these discs to sand welds at right angles.
These discs have a harder abrasive than standard flap sanding discs for corners.
Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.
The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.
Set at an angle and widely spaced, the flaps reach into corners.
A special fastener on the back of these discs allows you to easily swap one disc for another.
The premium abrasive stays sharp longer.
These discs have a harder abrasive than standard quick-change discs.
The heavy duty construction provides more support than standard discs for heavy material removal.
These discs have a harder abrasive than standard flexible-edge quick-change discs.
The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.
Debur, clean, and blend faster than other nylon mesh discs.
The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.
Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.
Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.
Fit these discs over your tool's arbor.
A coating prevents dust and debris from building up on the abrasive surface.
Holes in the disc let you see the surface you’re sanding.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Fit these discs over your tool’s arbor to sand stainless steel and hard metals.
The premium abrasive stays sharp longer. Holes in the disc let you see the surface you’re sanding.
Used for stripping, these discs eliminate discoloration from heat buildup.
Press onto a compatible sanding tool or backup pad; peel off to remove.
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Holes allow dust removal when used with a vacuum sander.
The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.
These discs are abrasive-embedded cloth with a cushioned layer.
Made of foam, these discs can conform to contoured shapes, corners, and sharp edges.
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.
The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.
The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.
Secure the shank into the collet or chuck of your tool.
A titanium aluminum nitride (TiAlN) coating provides heat and wear resistance for longer life.
Reach around barriers to cut, grind, shape, and remove sharp edges in hard-to-access spots.
Extend your reach with these 3" to 7¼" long burs.
Extend your reach with these 6 1/4" to 7" long burs.
Use these wheels to cut through metal such as iron, stainless steel, and steel.
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in metal.
Often used on duct, these ultra-thin wheels make fast, clean cuts in thin metal that minimize burrs and discoloration from heat.
With an X-shaped arbor hole, these wheels quickly and safely click into X-lock grinders without wrenches or flange nuts.
Switch between cutting and deburring aluminum, iron, stainless steel, and steel without the need to change your wheel.
Made of premium grade abrasives, these wheels are strong and thick for making notches in aluminum, iron, stainless steel, and steel.
Made of ceramic alumina or a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel, Hastelloy, and tool steel.
Made of ceramic alumina, these wheels last 10 times longer than standard cutoff wheels when cutting hard metal, such as tool steel. These wheels, also known as Type 27, raised hub, and depressed-center cutoff wheels, outperform Type 1 wheels when making flush cuts.
Ideal when working across multiple materials, these wheels are specially constructed to cut plastic, fiberglass, concrete, and ceramic, as well as metal.
Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.
These high-density ceramic or ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting iron, stainless steel, and steel.
Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel.
The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel, Hastelloy, and tool steel.
An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.
Made with boron nitride, second only in hardness to diamond, these wheels are highly wear resistant, so they easily cut steel with a Rockwell hardness of C50 or greater, including alloy steel, A2, D2, and T15 tool steel.
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Designed to cut sheet metal.
Use these wheels to cut through metal such as iron and steel. They are reinforced with a layer of fiberglass mesh.
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when aluminum, iron, stainless steel, and steel.
These non-reinforced aluminum oxide wheels create the nearly polished finish required for testing metal.
These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly.
Make cuts in most metal, including aluminum, iron, stainless steel, and steel.
Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.
Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.
Rigid, twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs.
The bristles are twisted all the way to the end so they’re more rigid and clean fastest.
Use on delicate surfaces.