Produce a smooth surface on precise, intricate grinding jobs. These bits are cushioned by rubber, so they create a smoother finish than other bits with similar grits. Made with a diamond abrasive, they last 10 to 20 times longer than rubber-cushioned bits without diamond. Their _3/32" diameter shank and small head allow them to get into intricate spots. Head diameter is measured at the widest point.

Caution: As bit shank is exposed beyond _1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Spend more time sanding and less time replacing clogged discs. A slick coating prevents dust and debris buildup on the abrasive surface. Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Pair these discs with a vacuum sander to keep your workspace clean. Dust is drawn away through the holes instead of floating into the air or building up on the abrasive. The hook-and-loop mount lets you switch grits without scrapping the disc, unlike adhesive-backed discs. Choose the hole configuration that matches your backup pad and vacuum sander.

Sand complex shapes, corners, and edges with foam discs that conform to your workpiece. The open cell material holds liquid for seamless wet sanding. Discs are also washable, so give them a quick rinse if they clog. The hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Pair discs with a compatible sanding tool or backup pad.

Our most clog-resistant discs. These have a slick coating and a mesh backing to clear dust and prevent buildup that can dull the abrasive. The hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Pair with a compatible backup pad and sander.

Switch from one grit to another without wasting discs. The hook-and-loop mount makes these discs reusable—unlike adhesive-back discs, which are one and done. Pair with a compatible sanding tool or backup pad.

The extra-sharp abrasive cuts through hard metals faster than other discs. A hook-and-loop mount lets you switch grits and avoid the waste of adhesive-backed discs, which are done after one use. Pair with a compatible sanding tool or backup pad (sold separately).

The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.