600 grit Grinding Wheels

Filter by

Grit

For Finish

Mount Type

System of Measurement

Diameter

Grit Rating

Material

For Use On

Form

Arbor Hole

Arbor Hole Thread Size

5/8"-11

For Use With

Angle Grinders

Grinders for Bits and Burs

Portable Disc Sanders

Stationary Disc Sanders

Abrasive Material

Performance

For Sanding

Abrasive Backing Material

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

REACH

RoHS

Rotation Speed

10,000 rpm to 19,999 rpm

Thread Size

5/8"-11

Grinding Wheel Designation

Type 29

Backing Plate Material

Fiberglass

Maximum Rotation Speed

13,000 rpm

Forward

How can we improve?

33 Products

Mount Type

Arbor

Secure directly to tool arbors for the most stable mounting

1 product

Adhesive Back

Press into place for a hold that won’t slip

15 products

Mount Type

Hook and Loop

Attach, remove, and reuse

17 products

Performance

Clog Resistant

Resist buildup of dust and debris

17 products

Arbor-Mount Flap Sanding Discs for Masonry, Ceramics, and Composites


	Angled

Flaps with silicon carbide abrasive cut through challenging materials and last longer than standard discs. As you work, the flaps expose new grit for steady material removal and even finishes. Mount discs onto your tool’s arbor.

Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.

Threaded Arbor Hole—These discs don’t need a nut to secure, so they're quicker to change out than unthreaded arbors.

Angled Disc—Make better contact on irregular surfaces than flat discs, so they're good for sanding bumps, contours, and edges.

	Abrasive Backing Material	Disc Shape	For Use On	For Use With	Backing Plate Material	Grit	Max. Rotation Speed, rpm		Each
Silicon Carbide Abrasive







	For Polished Finish

	4 1/2"	5/8"-11	Threaded	Cloth	Angled	Bricks, Carbon Fiber, Ceramic, Concrete, Fiberglass, Glass, Graphite, Stone	Angle Grinders	Fiberglass	600	13,000	4609A146	000000

Adhesive-Back Sanding Discs for Soft Metals, Plastic, and Rubber

Prevent clogging and smearing when sanding soft materials. The abrasive won’t trap particles, so these discs stay sharp longer. Press them onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.

Synthetic Paper Abrasive Backing—Waterproof to resist deterioration and curling when used for wet sanding.

Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.

Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.

	For Use With	Grit	Pkg. Qty.		Pkg.
Silicon Carbide Abrasive







	For Polished Finish

	5"	Paper	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	Portable Disc Sanders, Stationary Disc Sanders	600	100	4722A82	000000


	6"	Paper	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	Portable Disc Sanders, Stationary Disc Sanders	600	100	4722A94	00000
	8"	Synthetic Paper	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	Portable Disc Sanders, Stationary Disc Sanders	600	5	47185A51	0000
	9"	Synthetic Paper	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	Stationary Disc Sanders	600	5	47185A67	0000
	10"	Synthetic Paper	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	Stationary Disc Sanders	600	5	47185A47	00000
	12"	Synthetic Paper	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	Stationary Disc Sanders	600	5	47185A71	00000
	20"	Synthetic Paper	Aluminum, Brass, Bronze, Copper, Plastic, Rubber	Stationary Disc Sanders	600	5	47185A87	00000

Adhesive-Back Sanding Discs for Stainless Steel and Hard Metals

The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.

Ceramic Alumina Abrasive—The sharp edges cut quickly for efficient material removal.

Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.

	For Use With	Grit	Pkg. Qty.		Pkg.
Ceramic Alumina Abrasive







	For Polished Finish

	5"	Paper	Iron, Nickel, Stainless Steel, Steel, Titanium	Portable Disc Sanders, Stationary Disc Sanders	600	100	47125A805	000000


	6"	Paper	Iron, Nickel, Stainless Steel, Steel, Titanium	Portable Disc Sanders, Stationary Disc Sanders	600	100	47125A807	000000

Clog-Resistant Adhesive-Back Sanding Discs

Spend more time sanding and less time replacing clogged discs. A slick coating prevents dust and debris buildup on the abrasive surface. Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Plastic Abrasive Backing—Tear resistant and the best choice for wet sanding.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.

Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.

	For Use With	Grit	Pkg. Qty.		Pkg.
Aluminum Oxide Abrasive







	For Polished Finish

	5"	Plastic	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders	600	10	4184A61	00000


	6"	Plastic	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders	600	10	4184A51	00000

Clog-Resistant Hook and Loop Vacuum Sanding Discs

Sanding Disc

Our most clog-resistant discs. These have a slick coating and a mesh backing to clear dust and prevent buildup that can dull the abrasive. The hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Pair with a compatible backup pad and sander.

Cloth Mesh Abrasive Backing—Perforations allow debris through for low-dust sanding when paired with a vacuum sander.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.

Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.

								Each
	Dia.	For No. of Vacuum Holes	Abrasive Backing Material	For Use On	For Use With	Grit		1-49	50-Up
Aluminum Oxide Abrasive







				For Polished Finish

				5"	Any	Cloth Mesh	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders	600	4195A21	00000	00000


				6"	Any	Cloth Mesh	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders	600	4195A41	0000	0000

Backup Pads


Front	Back

Secure the shank on one of these pads into the collet or chuck of your tool and attach the quick-change connector on the back of compatible sanding discs to the pad.

	For No. of Vacuum Holes	Thread Size	Max. Speed, rpm		Each
For Hook and Loop Mount Disc



	5"	Any	5/16"-24	15,000	4724A102	000000


	6"	Any	5/16"-24	15,000	4724A101	00000

Hook and Loop Vacuum Sanding Discs

For Five-Hole

Vacuum Sanders

For Six-Hole

Vacuum Sanders

Pair these discs with a vacuum sander to keep your workspace clean. Dust is drawn away through the holes instead of floating into the air or building up on the abrasive. The hook-and-loop mount lets you switch grits without scrapping the disc, unlike adhesive-backed discs. Choose the hole configuration that matches your backup pad and vacuum sander.

Plastic Abrasive Backing—Tear resistant and the best choice for wet sanding.

Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.

Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.

Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.

	Abrasive Backing Material	For Use On	For Use With	Grit	Pkg. Qty.		Pkg.
Aluminum Oxide Abrasive







	For Polished Finish

	5"	5	7/16"	Plastic	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders	600	10	4321A54	000000


	6"	6	7/16"	Plastic	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders	600	10	4321A64	00000


	Silicon Carbide Abrasive







					For Polished Finish

					5"	5	3/8"	Cloth	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders	600	10	4611A779	00000

Accessories for Sanding Discs

Backup Pads


Front	Back

Secure the shank on one of these pads into the collet or chuck of your tool and attach the quick-change connector on the back of compatible sanding discs to the pad.

	For No. of Vacuum Holes	Thread Size	Max. Speed, rpm		Each
For Hook and Loop Mount Disc



	5"	5	5/16"-24	10,000	4724A94	000000


	5"	Any	5/16"-24	15,000	4724A102	00000
	6"	6	5/16"-24	10,000	4724A49	00000
	6"	Any	5/16"-24	15,000	4724A101	00000

Cushioning Pads

Cushioning pads fit between the sanding disc and backup pad to create a cushioned layer while sanding. The foam layer conforms to bumps and crevices and distributes pressure evenly on your workpiece as you sand, leading to finer and more consistent finishes.

	Thk.	Material	Color	For No. of Vacuum Holes		Each
Clog Resistant



	5"	1/2"	Foam	Black	Any	6691N103	000000


	6"	1/2"	Foam	Black	Any	6691N104	00000

Adhesive-Back Sanding Discs

Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.

Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.

Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.

	For Use With	Grit	Pkg. Qty.		Pkg.
Silicon Carbide Abrasive







	For Polished Finish

	2"	Cloth	Steel, Wood	Grinders for Bits and Burs, Portable Disc Sanders	600	50	4521A35	000000


	3"	Cloth	Steel, Wood	Grinders for Bits and Burs, Portable Disc Sanders	600	10	4521A36	00000
	5"	Cloth	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders	600	10	4521A37	00000
	6"	Cloth	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders	600	10	4521A38	00000

Hook and Loop Sanding Discs

For Five-Hole

Vacuum Sanders

Switch from one grit to another without wasting discs. The hook-and-loop mount makes these discs reusable—unlike adhesive-back discs, which are one and done. Pair with a compatible sanding tool or backup pad.

Plastic Abrasive Backing—A slick coating on the abrasive prevents dust and debris from building up.

Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.

Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.

Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.

Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.

	Abrasive Backing Material	For Use On	For Use With	Grit	Pkg. Qty.		Pkg.
Aluminum Oxide Abrasive







	For Polished Finish

	5"	—	—	Plastic	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders	600	10	4321A41	000000


	6"	—	—	Plastic	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders	600	10	4321A31	00000


	Silicon Carbide Abrasive







					For Polished Finish

					2"	—	—	Cloth	Steel, Wood	Grinders for Bits and Burs, Portable Disc Sanders	600	50	4521A46	00000


					3"	—	—	Cloth	Steel, Wood	Grinders for Bits and Burs, Portable Disc Sanders	600	10	4521A47	00000
					5"	—	—	Cloth	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders	600	10	4521A48	00000
					5"	5	3/8"	Cloth	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders	—	10	4521A51	00000
					6"	—	—	Cloth	Steel, Wood	Portable Disc Sanders, Stationary Disc Sanders	600	10	4521A49	00000