McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    131 Products

    Partially Grooved Dowel Pins

    The grooved section secures these pins while the smooth portion is free to act as a pivot or hinge. The grooves pinch shut when installed, creating tension to lock in place. They fit tighter than standard dowel pins and resist pulling from movement and vibration, even in imperfect holes.
    For the best fit, drill your hole slightly larger than the nominal diameter shown.
    Half Grooved
    Image of ProductInUse. Front orientation. Dowel Pins. Plain Head, Standard Tolerance, Partially Grooved, Half Grooved.
    Image of Product. Back orientation. Dowel Pins. Plain Head, Standard Tolerance, Partially Grooved, Half Grooved, Parallel Groove.
    Image of Product. Front orientation. Dowel Pins. Plain Head, Standard Tolerance, Partially Grooved, Half Grooved, Tapered Groove.

    Parallel Groove

    Tapered Groove

    Image of Product. Front orientation. Dowel Pins. Plain Head, Standard Tolerance, Partially Grooved, Half Grooved, Reverse-Tapered Groove.

    Reverse-Tapered

    Groove

    The most versatile partially grooved pins, these are used in a range of applications, including as rod end linkages, stop pins, and locators. Also known as type H pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Parallel Groove—Fit tighter than pins with tapered grooves to stay in place under severe vibration. However, they require more force to insert.
    Tapered Groove—Easier to install than pins with parallel grooves but less secure in high-vibration applications.
    Reverse-Tapered Groove—With grooves that narrow toward the end, these pins are the best for securing a stop or handle in a blind hole. They’re easier to insert than pins with parallel grooves but are less secure in high-vibration applications.
    Nominal
    Max.
    Lg.
    Dia.
    Dia. Tolerance
    Dia.
    Dia. Tolerance
    Groove Type
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Groove
    Lg.
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/32" Diameter
    1/4"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/8"—2598400A321000000
    1/2"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/4"—2598400A32200000
     
    1/8" Diameter
    1/2"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated1/4"—2598400A32300000
    3/4"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated3/8"—2598400A32400000
    1"0.125"-0.002" to 0"0.133"-0.003" to 0.003"Parallel1,600Not Rated1/2"—2598400A32500000
     
    5/32" Diameter
    1/2"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated1/4"—2598400A32600000
    3/4"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated3/8"—2598400A32700000
    1"0.156"-0.002" to 0"0.165"-0.003" to 0.003"Parallel2,300Not Rated1/2"—2598400A32800000
     
    3/16" Diameter
    1/2"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/4"—2598400A32900000
    3/4"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated3/8"—2598400A33000000
    1"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/2"—1098400A3310000
    1 1/2"0.188"-0.002" to 0"0.197"-0.003" to 0.003"Parallel3,300Not Rated3/4"—1098400A33200000
     
    1/4" Diameter
    3/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated3/8"—2598400A33300000
    1"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated1/2"—2598400A33400000
    1 1/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated5/8"—1098400A3350000
    1 1/2"0.25"-0.002" to 0"0.262"-0.003" to 0.003"Parallel5,800Not Rated3/4"—1098400A33600000
     
    5/16" Diameter
    3/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated3/8"—1098400A3370000
    1"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated1/2"—1098400A3380000
    1 1/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated5/8"—1098400A3390000
     
    3/8" Diameter
    1"0.375"-0.002" to 0"0.394"-0.003" to 0.003"Parallel11,000Not Rated1/2"—1098400A34000000
     
    2 mm Diameter
    8 mm2 mm-0.025 mm to 0 mm2.1 mm0 mm to 0.05 mmReverse Tapered600Rockwell B684 mmISO 87411098400A7130000
    10 mm2 mm-0.025 mm to 0 mm2.2 mm0 mm to 0.05 mmTapered600Rockwell B685 mmISO 87451098400A7110000
    14 mm2 mm-0.025 mm to 0 mm2.2 mm0 mm to 0.05 mmTapered600Rockwell B687 mmISO 87451098400A7120000
     
    2.5 mm Diameter
    6 mm2.5 mm-0.025 mm to 0 mm2.7 mm-0.05 mm to 0.05 mmTapered950Rockwell B683 mmISO 87451098400A7160000
    10 mm2.5 mm-0.025 mm to 0 mm2.7 mm-0.05 mm to 0.05 mmTapered950Rockwell B685 mmISO 87451098400A7140000
    14 mm2.5 mm-0.025 mm to 0 mm2.7 mm-0.05 mm to 0.05 mmReverse Tapered950Rockwell B687 mmISO 87411098400A7150000
     
    3 mm Diameter
    6 mm3 mm-0.025 mm to 0 mm3.2 mm-0.05 mm to 0.05 mmTapered1,400Rockwell B683 mmISO 87451098400A7250000
    8 mm3 mm-0.025 mm to 0 mm3.2 mm-0.05 mm to 0.05 mmTapered1,400Rockwell B684 mmISO 87451098400A7270000
    12 mm3 mm-0.025 mm to 0 mm3.1 mm-0.05 mm to 0.05 mmReverse Tapered1,400Rockwell B686 mmISO 87411098400A7180000
    12 mm3 mm-0.025 mm to 0 mm3.3 mm-0.05 mm to 0.05 mmTapered1,400Rockwell B686 mmISO 87451098400A7190000
    14 mm3 mm-0.025 mm to 0 mm3.2 mm-0.05 mm to 0.05 mmReverse Tapered1,400Rockwell B687 mmISO 87411098400A7210000
    20 mm3 mm-0.025 mm to 0 mm3.3 mm-0.05 mm to 0.05 mmTapered1,400Rockwell B6810 mmISO 87451098400A7220000
    24 mm3 mm-0.025 mm to 0 mm3.3 mm-0.05 mm to 0.05 mmTapered1,400Rockwell B6812 mmISO 87451098400A7230000
    26 mm3 mm-0.025 mm to 0 mm3.3 mm-0.05 mm to 0.05 mmTapered1,400Rockwell B6813 mmISO 87451098400A7240000
     
    4 mm Diameter
    10 mm4 mm-0.075 mm to 0 mm4.2 mm-0.05 mm to 0.05 mmReverse Tapered1,400Rockwell B685 mmISO 87411098400A7280000
    10 mm4 mm-0.075 mm to 0 mm4.3 mm-0.05 mm to 0.05 mmTapered2,500Rockwell B685 mmISO 87451098400A7290000
    16 mm4 mm-0.075 mm to 0 mm4.2 mm-0.05 mm to 0.05 mmReverse Tapered2,500Rockwell B688 mmISO 87411098400A7310000
    20 mm4 mm-0.075 mm to 0 mm4.2 mm-0.05 mm to 0.05 mmReverse Tapered2,500Rockwell B6810 mmISO 87411098400A7320000
    30 mm4 mm-0.075 mm to 0 mm4.3 mm-0.05 mm to 0.05 mmReverse Tapered2,500Rockwell B6815 mmISO 87411098400A7330000
     
    5 mm Diameter
    16 mm5 mm-0.075 mm to 0 mm5.3 mm-0.05 mm to 0.05 mmTapered3,900Rockwell B688 mmISO 87451098400A7360000
    18 mm5 mm-0.075 mm to 0 mm5.3 mm-0.05 mm to 0.05 mmTapered3,900Rockwell B689 mmISO 87451098400A73700000
    30 mm5 mm-0.075 mm to 0 mm5.3 mm-0.05 mm to 0.05 mmReverse Tapered3,900Rockwell B6815 mmISO 87411098400A73900000
    30 mm5 mm-0.075 mm to 0 mm5.4 mm-0.05 mm to 0.05 mmTapered3,900Rockwell B6815 mmISO 87451098400A74100000
     
    6 mm Diameter
    12 mm6 mm-0.075 mm to 0 mm6.3 mm-0.05 mm to 0.05 mmTapered5,700Rockwell B686 mmISO 87451098400A74200000
    14 mm6 mm-0.075 mm to 0 mm6.2 mm-0.05 mm to 0.05 mmReverse Tapered5,700Rockwell B687 mmISO 87411098400A74300000
    16 mm6 mm-0.075 mm to 0 mm6.2 mm-0.05 mm to 0.05 mmReverse Tapered5,700Rockwell B688 mmISO 87411098400A74400000
    20 mm6 mm-0.075 mm to 0 mm6.3 mm-0.05 mm to 0.05 mmTapered5,700Rockwell B6810 mmISO 87451098400A74500000
    26 mm6 mm-0.075 mm to 0 mm6.4 mm-0.05 mm to 0.05 mmTapered5,700Rockwell B6813 mmISO 87451098400A74600000
    30 mm6 mm-0.075 mm to 0 mm6.4 mm-0.05 mm to 0.05 mmTapered5,700Rockwell B6815 mmISO 87451098400A74700000
    40 mm6 mm-0.075 mm to 0 mm6.4 mm-0.05 mm to 0.05 mmTapered5,700Rockwell B6820 mmISO 87451098400A74800000
     
    8 mm Diameter
    16 mm8 mm-0.09 mm to 0 mm8.3 mm-0.05 mm to 0.05 mmTapered10,100Rockwell B688 mmISO 8745598400A74900000
     
    Center Grooved
    Image of ProductInUse. Front orientation. Dowel Pins. Plain Head, Standard Tolerance, Partially Grooved, Center Grooved.
    Image of Product. Front orientation. Dowel Pins. Plain Head, Standard Tolerance, Partially Grooved, Center Grooved, Parallel Groove.

    Parallel Groove

    These pins lock in the middle, leaving two smooth ends free. They're often used to create a T-handle, such as on a valve stem to open and close it by hand. Also known as type E pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Parallel Groove—Fit tighter than pins with tapered grooves to stay in place under severe vibration. However, they require more force to insert.
    Nominal
    Max.
    Lg.
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia. Tolerance
    Groove
    Type
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Groove
    Lg.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/32" Diameter
    1/4"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/8"2598400A235000000
    1/2"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/4"2598400A23600000
     
    1/8" Diameter
    1/2"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated1/4"2598400A23700000
    3/4"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated3/8"2598400A23800000
    1"0.125"-0.002" to 0"0.133"-0.003" to 0.003"Parallel1,600Not Rated1/2"2598400A23900000
     
    5/32" Diameter
    1/2"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated1/4"2598400A24000000
    3/4"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated3/8"2598400A24100000
    1"0.156"-0.002" to 0"0.165"-0.003" to 0.003"Parallel2,300Not Rated1/2"2598400A24200000
     
    3/16" Diameter
    1/2"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/4"2598400A24300000
    3/4"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated3/8"2598400A24400000
    1"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/2"1098400A2450000
    1 1/2"0.188"-0.002" to 0"0.197"-0.003" to 0.003"Parallel3,300Not Rated3/4"1098400A26400000
     
    1/4" Diameter
    3/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated3/8"2598400A24600000
    1"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated1/2"2598400A24700000
    1 1/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated5/8"1098400A2480000
    1 1/2"0.25"-0.002" to 0"0.262"-0.003" to 0.003"Parallel5,800Not Rated3/4"1098400A26800000
     
    5/16" Diameter
    3/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated3/8"1098400A2490000
    1"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated1/2"1098400A2500000
    1 1/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated5/8"1098400A2510000
     
    3/8" Diameter
    1"0.375"-0.002" to 0"0.394"-0.003" to 0.003"Parallel11,000Not Rated1/2"1098400A25200000
     
    Quarter Grooved
    Image of ProductInUse. Front orientation. Dowel Pins. Plain Head, Standard Tolerance, Partially Grooved, Quarter Grooved.
    Image of Product. Front orientation. Dowel Pins. Plain Head, Standard Tolerance, Partially Grooved, Quarter Grooved, Parallel Groove.

    Parallel

    Groove

    With a longer smooth end than half-grooved dowel pins, these are often used for thicker pivoting parts, such as levers and hinges. Also known as type C pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Parallel Groove—Fit tighter than pins with tapered grooves to stay in place under severe vibration. However, they require more force to insert.
    Nominal
    Max.
    Lg.
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia. Tolerance
    Groove
    Type
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Groove
    Lg.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/32" Diameter
    1/4"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/16"2598400A001000000
    1/2"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/8"2598400A00200000
     
    1/8" Diameter
    1/2"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated1/8"2598400A00300000
    3/4"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated3/16"2598400A00400000
    1"0.125"-0.002" to 0"0.133"-0.003" to 0.003"Parallel1,600Not Rated1/4"2598400A00500000
     
    5/32" Diameter
    1/2"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated1/8"2598400A00600000
    3/4"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated3/16"2598400A00700000
    1"0.156"-0.002" to 0"0.165"-0.003" to 0.003"Parallel2,300Not Rated1/4"2598400A00800000
     
    3/16" Diameter
    1/2"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/8"2598400A00900000
    3/4"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated3/16"2598400A01000000
    1"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/4"1098400A0110000
    1 1/2"0.188"-0.002" to 0"0.197"-0.003" to 0.003"Parallel3,300Not Rated3/8"1098400A01200000
     
    1/4" Diameter
    3/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated3/16"2598400A01300000
    1"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated1/4"2598400A01400000
    1 1/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated5/16"1098400A0150000
    1 1/2"0.25"-0.002" to 0"0.262"-0.003" to 0.003"Parallel5,800Not Rated3/8"1098400A01600000
     
    5/16" Diameter
    3/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated3/16"1098400A0170000
    1"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated1/4"1098400A0180000
    1 1/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated5/16"1098400A0190000
     
    3/8" Diameter
    1"0.375"-0.002" to 0"0.394"-0.003" to 0.003"Parallel11,000Not Rated1/4"1098400A02000000
     

    Partially Grooved Dowel Pins with Notch

    Slip a spring into the notch at the end of the pin. Often used in automated machinery such as conveyors and robotic arms, the pin anchors the spring in place to create tension between components. The grooved section pinches shut when installed to lock the pin in place. Grooved pins have a tighter fit than standard dowel pins and resist pulling from movement and vibration.
    For the best fit, drill your hole slightly larger than the nominal diameter shown.
    Half Grooved
    Image of ProductInUse. Front orientation. Dowel Pins. Partially Grooved, Standard Tolerance, Notch Head, Half Grooved.
    Image of Product. Front orientation. Dowel Pins. Partially Grooved, Standard Tolerance, Notch Head, Half Grooved.
    Also known as type G pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Parallel Groove—Fit tighter than pins with tapered grooves to stay in place under severe vibration. However, they require more force to insert.
    Nominal
    Max.
    Lg.
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia. Tolerance
    Groove
    Type
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Groove
    Lg.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/32" Diameter
    1/4"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/8"2598400A360000000
    1/2"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Parallel850Not Rated1/4"2598400A36100000
     
    1/8" Diameter
    1/2"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated1/4"2598400A36200000
    3/4"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Parallel1,600Not Rated3/8"2598400A36300000
    1"0.125"-0.002" to 0"0.133"-0.003" to 0.003"Parallel1,600Not Rated1/2"2598400A36400000
     
    5/32" Diameter
    1/2"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated1/4"2598400A36500000
    3/4"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Parallel2,300Not Rated3/8"2598400A36600000
    1"0.156"-0.002" to 0"0.165"-0.003" to 0.003"Parallel2,300Not Rated1/2"2598400A36700000
     
    3/16" Diameter
    1/2"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/4"2598400A36800000
    3/4"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated3/8"2598400A36900000
    1"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Parallel3,300Not Rated1/2"1098400A3700000
    1 1/2"0.188"-0.002" to 0"0.197"-0.003" to 0.003"Parallel3,300Not Rated3/4"1098400A38900000
     
    1/4" Diameter
    3/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated3/8"2598400A37100000
    1"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated1/2"2598400A37200000
    1 1/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Parallel5,800Not Rated5/8"1098400A3730000
    1 1/2"0.25"-0.002" to 0"0.262"-0.003" to 0.003"Parallel5,800Not Rated3/4"1098400A39300000
     
    5/16" Diameter
    3/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated3/8"1098400A3740000
    1"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated1/2"1098400A3750000
    1 1/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Parallel7,600Not Rated5/8"1098400A3760000
     
    3/8" Diameter
    1"0.375"-0.002" to 0"0.394"-0.003" to 0.003"Parallel11,000Not Rated1/2"1098400A37700000
     

    Fully Grooved Dowel Pins

    With a tighter fit than standard dowel pins, these resist pulling from movement and vibration, even in imperfect holes. Three grooves pinch shut when installed, creating tension to lock in place. Also known as Type A pins.
    For the best fit, drill your hole slightly larger than the nominal diameter shown.
    Steel
    Image of Product. Front orientation. Dowel Pins. Plain Head, Standard Tolerance, Fully Grooved, Tapered Groove.

    Tapered Groove

    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Tapered Groove—Easier to install than pins with parallel grooves but less secure in high-vibration applications.
    Nominal
    Max.
    Lg.
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia. Tolerance
    Groove
    Type
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    3/32" Diameter
    1/4"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Tapered850Not Rated2598400A110000000
    1/2"0.094"-0.002" to 0"0.101"-0.003" to 0.003"Tapered850Not Rated2598400A11100000
     
    1/8" Diameter
    1/2"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Tapered1,600Not Rated2598400A11200000
    3/4"0.125"-0.002" to 0"0.134"-0.003" to 0.003"Tapered1,600Not Rated2598400A11300000
    1"0.125"-0.002" to 0"0.133"-0.003" to 0.003"Tapered1,600Not Rated2598400A11400000
     
    5/32" Diameter
    1/2"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Tapered2,300Not Rated2598400A11500000
    3/4"0.156"-0.002" to 0"0.166"-0.003" to 0.003"Tapered2,300Not Rated2598400A11600000
    1"0.156"-0.002" to 0"0.165"-0.003" to 0.003"Tapered2,300Not Rated2598400A11700000
     
    3/16" Diameter
    1/2"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Tapered3,300Not Rated2598400A11800000
    3/4"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Tapered3,300Not Rated2598400A11900000
    1"0.188"-0.002" to 0"0.198"-0.003" to 0.003"Tapered3,300Not Rated1098400A1200000
    1 1/2"0.188"-0.002" to 0"0.197"-0.003" to 0.003"Tapered3,300Not Rated1098400A13900000
     
    1/4" Diameter
    3/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Tapered5,800Not Rated2598400A12100000
    1"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Tapered5,800Not Rated2598400A12200000
    1 1/4"0.25"-0.002" to 0"0.263"-0.003" to 0.003"Tapered5,800Not Rated1098400A1230000
    1 1/2"0.25"-0.002" to 0"0.262"-0.003" to 0.003"Tapered5,800Not Rated1098400A14300000
     
    5/16" Diameter
    3/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Tapered7,600Not Rated1098400A1240000
    1"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Tapered7,600Not Rated1098400A1250000
    1 1/4"0.313"-0.002" to 0"0.329"-0.003" to 0.003"Tapered7,600Not Rated1098400A1260000
     
    3/8" Diameter
    1"0.375"-0.002" to 0"0.394"-0.003" to 0.003"Tapered11,000Not Rated1098400A12700000
     
    back to top