Hammer Faces

Filter by

Face Mount Type

Face Diameter

Face Color

Face Material

Hammer Type

Face Shape

Face Thread Size

Head Weight

Material

Face Hardness Rating

Grip Style

Color

Head Material

Handle Material

Overall Length

DFARS Specialty Metals

Exempt

RoHS

Compliant

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Thread Size

Export Control Classification Number (ECCN)

REACH

Face Thread Type

Thread Type

Performance

Length

Handle Replaceable

196 Products

About Hammer Faces

Compare hardness to choose a plastic hammer face, from as soft as an eraser to harder than a bowling ball.

Screw-In Hammer Faces

These faces have screw threads to attach to the head of your hammer or mallet. Replace existing faces or switch to a face with a different hardness.

Nylon

Screw-In

Face

Nylon faces are softer than metal faces, so they're good for sheet metal work.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Face		Hard Face
Face Dia.	Thread Size	Thread Type	Face Color		Each
1"	7/16"-14	UNC	Off-White	5914A18	00000
1 1/4"	9/16"-12	UNC	Off-White	5914A6	0000
1 1/2"	5/8"-11	UNC	Off-White	5914A7	0000
1 3/4"	3/4"-12	BSF	Off-White	5914A8	0000
2"	13/16"-12	BSF	Off-White	5914A9	0000
2 1/2"	1"-10	BSF	Off-White	5914A11	00000

Polyethylene

Screw-In

Face

Polyethylene faces are softer than metal faces, so they're good for sheet metal work.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Face		Extra-Hard Face
Face Dia.	Thread Size	Thread Type	Face Color		Each
5/8"	1/4"-20	UNC	Yellow	5912A18	00000
7/8"	5/16"-18	UNC	Yellow	5912A16	0000
1"	7/16"-14	UNC	Yellow	5951A8	0000
1 1/4"	7/16"-14	UNC	Yellow	5912A17	0000
1 3/4"	1/2"-13	UNC	Yellow	5912A19	0000

PVC


	Screw-In Face

PVC faces are softer than metal faces, so they're good for sheet metal work.

Extra-Soft Face—Extra-soft faces have a hardness similar to that of a pencil eraser.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium-Soft Face—Medium-soft faces have a hardness similar to that of a shoe heel.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Medium-Hard Face—Medium-hard faces have a hardness similar to that of a plastic cutting board.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Face		Extra-Soft Face			Soft Face			Medium-Soft Face			Medium Face			Medium-Hard Face			Hard Face			Extra-Hard Face
Face Dia.	Thread Size	Thread Type	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each
1"	1/4"-20	UNC	—	———	0	—	———	0	Red	5877A51	00000	Green	5877A61	00000	Off-White	5877A71	00000	Black	5877A81	00000	Yellow	5877A91	00000
1 1/2"	5/16"-18	UNC	Gray	5877A32	000000	Brown	5877A42	00000	Red	5877A52	0000	Green	5877A62	0000	Off-White	5877A72	00000	Black	5877A82	00000	Yellow	5877A92	00000
2"	3/8"-16	UNC	—	———	0	Brown	5877A43	00000	Red	5877A53	00000	Green	5877A63	00000	Off-White	5877A73	00000	Black	5877A83	00000	Yellow	5877A93	00000
3"	1/2"-13	UNC	—	———	0	—	———	0	Red	5877A55	00000	Green	5877A65	00000	—	———	0	Black	5877A85	00000	—	———	0

Polyurethane Rubber


	Screw-In Face

Polyurethane rubber faces are softer than metal faces, so they're good for sheet metal work.

Extra-Soft Face—Extra-soft faces have a hardness similar to that of a pencil eraser.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Medium-Hard Face—Medium-hard faces have a hardness similar to that of a plastic cutting board.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Face			Extra-Soft Face			Soft Face			Medium Face			Medium-Hard Face			Hard Face			Extra-Hard Face
Face Dia.	Thread Size	Pipe Size	Thread Type	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each
1"	1/4"-20	—	UNC	—	———	0	Orange	6047A31	000000	Green	6047A41	000000	—	———	0	Red	6047A51	000000	Black	6047A61	000000
1 1/4"	5/16"-18	—	UNC	—	———	0	Orange	6047A32	00000	Green	6047A42	00000	—	———	0	Red	6047A52	00000	Black	6047A62	00000
1 3/8"	—	3/4	NPT	Clear	60515A11	000000	Blue	60515A12	00000	Green	60515A13	00000	Red	60515A14	000000	Amber	60515A15	00000	Black	60515A16	00000
1 1/2"	5/16"-18	—	UNC	—	———	0	Orange	6047A33	00000	Green	6047A43	00000	—	———	0	Red	6047A53	00000	Black	6047A63	00000
1 3/4"	—	1	NPT	Clear	60515A21	00000	Blue	60515A22	00000	Green	60515A23	00000	Red	60515A24	00000	Amber	60515A25	00000	Black	60515A26	00000
1 7/8"	—	1	NPT	Clear	60515A31	00000	Blue	60515A32	00000	Green	60515A33	00000	Red	60515A34	00000	Amber	60515A35	00000	Black	60515A36	00000
2"	3/8"-16	—	UNC	—	———	0	Orange	6047A34	00000	Green	6047A44	00000	—	———	0	Red	6047A54	00000	Black	6047A64	00000
2 1/2"	—	1 1/4	NPT	Clear	60515A41	00000	Blue	60515A42	00000	Green	60515A43	00000	Red	60515A44	00000	Amber	60515A45	00000	Black	60515A46	00000
2 1/2"	7/16"-14	—	UNC	—	———	0	Orange	6047A35	00000	Green	6047A45	00000	—	———	0	Red	6047A55	00000	Black	6047A65	00000
2 7/8"	—	1 1/2	NPT	Clear	60515A51	00000	Blue	60515A52	00000	Green	60515A53	00000	Red	60515A54	00000	Amber	60515A55	00000	Black	60515A56	00000
3"	1/2"-13	—	UNC	—	———	0	Orange	6047A36	00000	Green	6047A46	00000	—	———	0	Red	6047A56	00000	Black	6047A66	00000

Replace faces on a compatible hammer or mallet head or switch to a face with a different hardness.

Clamping Head

Urethane Rubber Face

Polyethylene Face

Clamping Head

Clamping-head faces are for use in heads with two pieces that clamp together to hold the face in place.

Urethane Rubber Face—Urethane rubber faces are softer than metal faces, so they're good for sheet metal work.

Polyethylene Face—Polyethylene faces are softer than metal faces, so they're good for sheet metal work.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Face Hardness Rating	Face Color		Each
Urethane Rubber



	1 1/4"	Hard	Off-White	5911A16	000000


	1 1/2"	Hard	Off-White	5911A17	00000
	1 3/4"	Hard	Off-White	5911A18	00000
	2"	Hard	Off-White	5911A19	00000
	2 3/4"	Hard	Off-White	5911A21	00000


	Polyethylene



			1 1/4"	Extra Hard	Yellow	5911A27	00000


			1 1/2"	Extra Hard	Yellow	5911A28	00000
			1 3/4"	Extra Hard	Yellow	5911A29	00000
			2"	Extra Hard	Yellow	5911A31	00000
			2 3/4"	Extra Hard	Yellow	5911A51	00000

Press Fit

Kraton Face

Surlyn Face

SBR Face

Nylon Face

Polyurethane

Rubber Face

Press-fit faces can be used in clamping heads and pressed into hammer heads that have been drilled out.

Kraton Face—Kraton faces are softer than metal faces, so they're good for sheet metal work.

Surlyn Face—Surlyn faces are softer than metal faces, so they're good for sheet metal work.

SBR Face—SBR faces are softer than metal faces, so they're good for sheet metal work.

Nylon Face—Nylon faces are softer than metal faces, so they're good for sheet metal work.

Polyurethane Rubber Face—Polyurethane rubber faces are softer than metal faces, so they're good for sheet metal work.

Medium-Soft Face—Medium-soft faces have a hardness similar to that of a shoe heel.

Medium-Hard Face—Medium-hard faces have a hardness similar to that of a plastic cutting board.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

White Face—White SBR faces won't leave marks on your work.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Face Lg.	Face Wd.	Face Hardness Rating	Face Color		Each
Round Kraton



	1"	—	—	Medium Soft	Red	3755A48	00000


	1 3/8"	—	—	Medium Soft	Red	3755A51	0000


	Round Surlyn



			1"	—	—	Hard	Yellow	3755A47	0000


			1 3/8"	—	—	Hard	Yellow	3755A49	0000


			Round SBR



					2"	—	—	Hard	Black	5939A12	0000


					2"	—	—	Extra Hard	White	5939A13	0000


					Round Nylon



							1 1/4"	—	—	Hard	White	3216N12	0000


							1 3/8"	—	—	Hard	White	3216N13	0000
							4"	—	—	Hard	White	3216N14	00000


							Rectangular Polyurethane Rubber



									—	1 3/16"	1 9/16"	Medium Hard	Off-White	3216N11	0000

Clamping Head/Press Fit

Rawhide Leather Face

Copper Face

Clamping-Head Face

Clamping-head faces are for use in heads with two pieces that clamp together to hold the face in place.

Press-fit faces can be used in clamping heads and pressed into hammer heads that have been drilled out.

Rawhide Leather Face—Rawhide leather faces are more durable than plastic and won't distort the surface of soft sheet metal, such as brass, aluminum, and copper.

Copper Face—Copper faces are for use on brass, copper, aluminum, and steel.

		Each
Rawhide Leather



	1"	5907A17	000000


	1 1/4"	5907A18	00000
	1 1/2"	5907A19	00000
	1 3/4"	5907A21	00000
	2"	5907A22	00000
	2 3/4"	5907A23	00000


	Copper



			1"	5905A21	0000


			1 1/4"	5905A22	0000
			1 1/2"	5905A23	00000
			1 3/4"	5905A24	00000
			2"	5905A25	00000

Replaceable-Face Mallets

Replace faces when they become worn rather than replacing the entire tool. These mallets are suitable for driving chisels and striking work without damaging its surface. Choose a mallet with a face that's softer than your workpiece to avoid marring it when tapping or striking. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.

Press-Fit Nylon Face

Plain Grip

Nylon faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.

Hickory Handle—Hickory handles resist vibration.

Ash Handle—Ash handles resist vibration.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Mallets								Replacement Faces
	Head Wt.	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Replaceable		Each		Each
Ash Handle with Plain Grip



		6 oz.	1"	Hard (White)	11"	Zinc Alloy	Yes	5914A12	000000	5914A31	00000


		11 oz.	1 1/4"	Hard (White)	10 1/2"	Zinc Alloy	Yes	5914A13	00000	5914A32	0000
		15 oz.	1 1/2"	Hard (White)	13"	Zinc Alloy	Yes	5914A14	00000	5914A33	0000
		1 7/8 lb.	2"	Hard (White)	13 1/2"	Zinc Alloy	Yes	5914A15	00000	5914A34	00000


		Hickory Handle with Plain Grip



				2 lb.	2"	Hard (White)	14 1/2"	Steel	Yes	5914A16	00000	5914A35	0000


				3 3/8 lb.	—	Hard (White)	14 1/4"	Steel	Yes	5914A39	000000	5914A36	00000

Screw-In Polyethylene Face


Hickory Handle with Plain Grip	Smooth Grip

Polyethylene faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.

Acetal Handle—Acetal handles are lightweight.

Hickory Handle—Hickory handles resist vibration.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Mallets										Replacement Faces
				Face
	Head Wt.	Face Dia.	Face Hardness Rating (Face Color)	Thread Size	Thread Type	Overall Lg.	Head Material	Handle Replaceable		Each		Each
Acetal Handle—Smooth Grip



		2 oz.	5/8"	Extra Hard (Yellow)	1/4"-20	UNC	8 1/4"	Steel	No	5912A21	000000	5912A18	00000


		4 oz.	7/8"	Extra Hard (Yellow)	5/16"-18	UNC	9 1/4"	Steel	No	5912A11	00000	5912A16	0000


		Hickory Handle with Plain Grip



				7 oz.	1"	Extra Hard (Yellow)	7/16"-14	UNC	10 1/4"	Steel	No	5912A22	00000	5951A8	0000


				8 oz.	1 1/4"	Extra Hard (Yellow)	7/16"-14	UNC	12"	Steel	No	5912A12	00000	5912A17	0000
				1 lb.	1 1/4"	Extra Hard (Yellow)	7/16"-14	UNC	12"	Steel	No	5912A13	00000	5912A17	0000
				2 lb.	1 3/4"	Extra Hard (Yellow)	1/2"-13	UNC	12 3/4"	Steel	No	5912A15	00000	5912A19	0000

Screw-In Acetal × Brass Faces

Plain Grip

Mallets with two face materials can be used for a wider range of applications than other mallets.

Acetal faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.

Brass faces are harder than copper and suitable for striking steel, iron, stone, and other hard surfaces.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Mallets										Replacement Face Sets
				Face
	Head Wt., oz.	Face Dia.	Face Hardness Rating (Face Color)	Thread Size	Thread Type	Overall Lg.	Head Material	Handle Replaceable		Each		Each
Maple Handle with Plain Grip



		4	1/2" 1/2"	Extra Hard (Black)	5/8"-32	UN	9"	Aluminum	No	6086A13	000000	6086A15	000000

Press-Fit Surlyn × Kraton Faces

Hickory Handle with

Plain Grip

Mallets with two face materials can be used for a wider range of applications than other mallets.

Surlyn and kraton faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.

Hickory Handle—Hickory handles resist vibration.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Medium-Soft Face—Medium-soft faces have a hardness similar to that of a shoe heel.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle with Plain Grip



	6	1"	Hard (Yellow) × Medium Soft (Red)	10 1/2"	Steel	Yes	3755A45	000000


	12	1 3/8"	Hard (Yellow) × Medium Soft (Red)	11 1/4"	Steel	Yes	3755A46	00000

Replacement Faces

		Each
1 3/8" Dia. Medium Soft (Red) Replacement Face	3755A51	00000
1 3/8" Dia. Hard (Yellow) Replacement Face	3755A49	0000
1" Dia. Medium Soft (Red) Replacement Face	3755A48	0000
1" Dia. Hard (Yellow) Replacement Face	3755A47	0000

Press-Fit SBR Face

Hickory Handle with

Plain Grip

SBR faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.

Hickory Handle—Hickory handles resist vibration.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

White Face—White SBR faces are nonmarking.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle with Plain Grip



	1 1/2	2"	Extra Hard (White) × Hard (Black)	14"	Steel	Yes	5939A11	000000

Replacement Faces

		Each
Extra-Hard (White) Replacement Face	5939A13	00000
Hard (Black) Replacement Face	5939A12	0000

Press-Fit Steel × Nylon Faces

Press Fit with Textured

Grip

Mallets with two face materials can be used for a wider range of applications than other mallets.

Steel faces are the hardest metal faces we offer. Use them to drive chisels, masonry drills, and nails.

Nylon faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.

Steel Handle—Steel handles are stronger than wooden handles but have less vibration resistance.

Textured Grip—Textured grips provide slip resistance.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Mallets								Replacement Faces
	Head Wt.	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Replaceable		Each		Each
Steel Handle with Textured Grip



		15 oz.	1 1/8"	Hard (White)	11 1/2"	Steel	No	3212N14	000000	3216N12	00000


		1 3/8 lb.	1 3/8"	Hard (White)	11 1/2"	Steel	No	3212N15	00000	3216N13	0000

Press-Fit Rawhide Leather Face

Hickory Handle with

Plain Grip

Rawhide leather faces are more durable than plastic and won't distort the surface of soft sheet metal, such as brass, aluminum, and copper.

Hickory Handle—Hickory handles resist vibration.

	Mallets							Replacement Handles
	Head Wt., lb.	Face Dia.	Overall Lg.	Head Material	Handle Replaceable		Each		Each
Hickory Handle with Plain Grip



		1	1 1/4"	11"	Steel	Yes	5907A12	0000000	5907A32	000000


		1 1/2	1 1/2"	11"	Steel	Yes	5907A13	000000	5907A33	00000
		2 1/2	1 3/4"	12 1/4"	Steel	Yes	5907A14	000000	5907A34	00000
		4	2"	13 1/2"	Steel	Yes	5907A15	000000	5907A35	00000
		5 3/4	2 3/4"	13 1/2"	Steel	Yes	5907A16	000000	5907A36	00000

Rawhide Leather Faces

	Face Dia.
Clamping-Head/Press-Fit Rawhide Leather Faces


1 1/4"	5907A18	000000
1 1/2"	5907A19	00000
1 3/4"	5907A21	00000
2"	5907A22	00000
2 3/4"	5907A23	00000

Press-Fit Copper Face

Plain Grip

Copper faces are for use on brass, copper, aluminum, and steel.

Hickory Handle—Hickory handles resist vibration.

Ash Handle—Ash handles resist vibration.

	Face Dia.	Overall Lg.	Head Material	Handle Replaceable		Each
Ash Handle with Plain Grip



	1	1"	9"	Iron	Yes	5905A11	000000


	1 3/4	1 1/4"	10 3/4"	Iron	Yes	5905A12	00000


	Hickory Handle with Plain Grip



			2 3/4	1 1/2"	12"	Iron	Yes	5905A13	00000


			4	1 3/4"	12"	Iron	Yes	5905A14	00000
			6 1/2	2"	14"	Iron	Yes	5905A15	000000

Copper Faces

	Face Dia.
Clamping-Head/Press-Fit Copper Faces


1"	5905A21	00000
1 1/4"	5905A22	0000
1 1/2"	5905A23	00000
1 3/4"	5905A24	00000
2"	5905A25	00000

Replaceable-Face Dead Blow Mallets

The replaceable faces can be changed out when worn. These mallets have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. The polyurethane rubber faces resist oils and solvents and won't crack under high impact; they're often used on plastic, wood, and sheet metal. To avoid marring when tapping or striking, choose a face that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. The handle has a ribbed grip for slip resistance.

Rectangular Press-Fit Polyurethane Rubber Face

Steel Handle—Steel handles are stronger than wooden handles but have less vibration resistance.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

	Face Lg.	Face Wd.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Replaceable		Each
Steel Handle—Ribbed Grip



	1	1 3/16"	1 9/16"	Medium (Yellow)	11 3/4"	Steel	No	3209N15	000000

Polyurethane Rubber Faces

			Medium Hard (Off-White)
Press-Fit Polyurethane Rubber Faces


1 3/16"	1 9/16"	3216N11	00000

Round Screw-In Polyurethane Rubber Face

Hickory Handle—Hickory handles resist vibration.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

				Face
	Head Wt.	Face Dia.	Face Hardness Rating (Face Color)	Thread Size	Thread Type	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle—Ribbed Grip



		10 oz.	1"	Medium (Green) × Extra Hard (Black)	1/4"-20	UNC	11"	Aluminum	Yes	6047A81	000000


		14 oz.	1"	Medium (Green) × Extra Hard (Black)	1/4"-20	UNC	11"	Iron	Yes	6047A82	00000
		14 oz.	1 1/4"	Medium (Green) × Extra Hard (Black)	5/16"-18	UNC	12"	Aluminum	Yes	6047A83	00000
		1 3/8 lb.	1 1/4"	Medium (Green) × Extra Hard (Black)	5/16"-18	UNC	12"	Iron	Yes	6047A14	00000
		1 3/8 lb.	1 1/2"	Medium (Green) × Extra Hard (Black)	5/16"-18	UNC	13"	Aluminum	Yes	6047A15	00000
		1 7/8 lb.	1 1/2"	Medium (Green) × Extra Hard (Black)	5/16"-18	UNC	13"	Iron	Yes	6047A16	00000
		2 3/8 lb.	2"	Medium (Green) × Extra Hard (Black)	3/8"-16	UNC	15"	Aluminum	Yes	6047A17	000000
		3 1/2 lb.	2"	Medium (Green) × Extra Hard (Black)	3/8"-16	UNC	15"	Iron	Yes	6047A18	000000
		4 1/8 lb.	2 1/2"	Medium (Green) × Extra Hard (Black)	7/16"-14	UNC	17"	Aluminum	Yes	6047A19	000000
		6 1/2 lb.	2 1/2"	Medium (Green) × Extra Hard (Black)	7/16"-14	UNC	17"	Iron	Yes	6047A21	000000

Polyurethane Rubber Faces

Image of Product. Front orientation. Hammer Faces. Replaceable-Face Dead Blow Mallets , Polyurethane Rubber Face.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

		Face		Soft (Orange)		Medium (Green)		Hard (Red)		Extra Hard (Black)
	Face Dia.	Thread Size	Thread Type		Each		Each		Each		Each
Screw-In Polyurethane Rubber Faces



		1"	1/4"-20	UNC	6047A31	000000	6047A41	000000	6047A51	000000	6047A61	000000


		1 1/4"	5/16"-18	UNC	6047A32	00000	6047A42	00000	6047A52	00000	6047A62	00000
		1 1/2"	5/16"-18	UNC	6047A33	00000	6047A43	00000	6047A53	00000	6047A63	00000
		2"	3/8"-16	UNC	6047A34	00000	6047A44	00000	6047A54	00000	6047A64	00000
		2 1/2"	7/16"-14	UNC	6047A35	00000	6047A45	00000	6047A55	00000	6047A65	00000

High-Visibility Replaceable-Face Dead Blow Mallets

Change the faces out when worn rather than replacing the entire tool. A fluorescent orange color makes these mallets easy to see. All have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. Often used on plastic, wood, and sheet metal, the polyurethane rubber faces resist oils and solvents and won't crack under high impact. The medium-hard face has a hardness similar to that of a plastic cutting board; the extra-hard face has a hardness similar to that of a hard hat. Use a face that's softer than your workpiece to avoid marring. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Choose heavier weight mallets for assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. A textured grip provides slip resistance.

Round Screw-In Polyurethane Rubber Face

				Face
	Head Wt.	Face Dia.	Face Hardness Rating (Face Color)	Pipe Size	Thread Type	Overall Lg.	Head Material	Handle Color	Handle Replaceable		Each
Polyurethane Rubber Handle with Steel Core—Textured Grip



		12 oz.	1 3/8"	Medium Hard (Red) × Extra Hard (Black)	3/4	NPT	10"	Polyurethane Rubber	Fluorescent Orange	No	60515A1	000000


		1 1/2 lb.	1 3/4"	Medium Hard (Red) × Extra Hard (Black)	1	NPT	11"	Polyurethane Rubber	Fluorescent Orange	No	60515A2	00000
		2 lb.	1 7/8"	Medium Hard (Red) × Extra Hard (Black)	1	NPT	11 3/4"	Polyurethane Rubber	Fluorescent Orange	No	60515A3	00000
		3 lb.	2 1/2"	Medium Hard (Red) × Extra Hard (Black)	1 1/4	NPT	13 3/4"	Polyurethane Rubber	Fluorescent Orange	No	60515A4	00000
		4 1/2 lb.	2 7/8"	Medium Hard (Red) × Extra Hard (Black)	1 1/2	NPT	14 3/4"	Polyurethane Rubber	Fluorescent Orange	No	60515A5	000000
		7 lb.	2 7/8"	Medium Hard (Red) × Extra Hard (Black)	1 1/2	NPT	19 1/4"	Polyurethane Rubber	Fluorescent Orange	No	60515A6	000000

Polyurethane Rubber Faces

Image of Product. Front orientation. Hammer Faces. High-Visibility Replaceable-Face Dead Blow Mallets , Polyurethane Rubber Face.

Extra-Soft Face—Extra-soft faces have a hardness similar to that of a pencil eraser.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Medium-Hard Face—Medium-hard faces have a hardness similar to that of a plastic cutting board.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

		Face		Extra Soft (Clear)		Soft (Blue)		Medium (Green)		Medium Hard (Red)		Hard (Amber)		Extra Hard (Black)
	Face Dia.	Pipe Size	Thread Type		Each		Each		Each		Each		Each		Each
Screw-In Polyurethane Rubber Faces



		1 3/8"	3/4	NPT	60515A11	000000	60515A12	000000	60515A13	000000	60515A14	000000	60515A15	000000	60515A16	000000


		1 3/4"	1	NPT	60515A21	00000	60515A22	00000	60515A23	00000	60515A24	00000	60515A25	00000	60515A26	00000
		1 7/8"	1	NPT	60515A31	00000	60515A32	00000	60515A33	00000	60515A34	00000	60515A35	00000	60515A36	00000
		2 1/2"	1 1/4	NPT	60515A41	00000	60515A42	00000	60515A43	00000	60515A44	00000	60515A45	00000	60515A46	00000
		2 7/8"	1 1/2	NPT	60515A51	00000	60515A52	00000	60515A53	00000	60515A54	00000	60515A55	00000	60515A56	00000

Create-Your-Own Mallets

Assembled Hammer

Pair a body with two faces of different materials to create the perfect striking tool. Use mallets to drive chisels and strike work without damaging its surface. To avoid marring, use a face material that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.

Bodies with Screw-In Face Mount


	Screw-In Face

Bodies for screw-in face mount mallets have threads at each end of the head for attaching faces. They include a head and handle. The handle has a textured grip for slip resistance.

			Face
	Head Wt.	For Face Dia.	Thread Size	Thread Type	Overall Lg.	Head Material	Handle Replaceable		Each
Fiberglass Handle with Textured Grip



		8 oz.	1"	1/4"-20	UNC	11"	Nylon	No	5877A151	000000


		13 oz.	1 1/2"	5/16"-18	UNC	12 1/2"	Nylon	No	5877A153	00000
		1 1/8 lb.	2"	3/8"-16	UNC	14"	Nylon	No	5877A154	00000
		1 3/4 lb.	2"	3/8"-16	UNC	14"	Nylon	No	5877A157	00000
		4 7/8 lb.	3"	1/2"-13	UNC	15"	Nylon	No	5877A161	00000

Accessories for Bodies

PVC Faces

PVC Face

PVC Faces—PVC faces are softer than metal faces, so they're good for sheet metal work.

Extra-Soft Face—Extra-soft faces have a hardness similar to that of a pencil eraser.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium-Soft Face—Medium-soft faces have a hardness similar to that of a shoe heel.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Medium-Hard Face—Medium-hard faces have a hardness similar to that of a plastic cutting board.

Hard Face—Hard faces have a hardness similar to that of a bowling ball. Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.

			Extra-Soft Face		Soft Face		Medium-Soft Face		Medium Face		Medium-Hard Face		Hard Face		Extra-Hard Face
	Face Dia.	Face Thread Size		Each		Each		Each		Each		Each		Each		Each
Screw-In PVC Faces



		1"	1/4"-20	———	0	———	0	5877A51	00000	5877A61	00000	5877A71	00000	5877A81	00000	5877A91	00000


		1 1/2"	5/16"-18	5877A32	000000	5877A42	00000	5877A52	0000	5877A62	0000	5877A72	00000	5877A82	00000	5877A92	00000
		2"	3/8"-16	———	0	5877A43	00000	5877A53	00000	5877A63	00000	5877A73	00000	5877A83	00000	5877A93	00000
		3"	1/2"-13	———	0	———	0	5877A55	00000	5877A65	00000	———	0	5877A85	00000	———	0

Polyurethane Rubber Faces

Polyurethane

Rubber Face

Polyurethane Rubber Face—Polyurethane rubber faces are softer than metal faces, so they're good for sheet metal work.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Hard Face—Hard faces have a hardness similar to that of a bowling ball. Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.

		Face		Soft (Orange)		Medium (Green)		Hard (Red)		Extra Hard (Black)
	Face Dia.	Thread Size	Thread Type		Each		Each		Each		Each
Screw-In Polyurethane Rubber Faces



		1"	1/4"-20	UNC	6047A31	000000	6047A41	000000	6047A51	000000	6047A61	000000


		1 1/2"	5/16"-18	UNC	6047A33	00000	6047A43	00000	6047A53	00000	6047A63	00000
		2"	3/8"-16	UNC	6047A34	00000	6047A44	00000	6047A54	00000	6047A64	00000
		3"	1/2"-13	UNC	6047A36	00000	6047A46	00000	6047A56	00000	6047A66	00000

Bodies with Clamping-Head Face Mount


	Clamping-Head Face

Bodies for clamping-head face mount mallets have a head with two pieces that clamp together to grip faces tightly. They include a head, nut, and replaceable handle. To assemble, loosen the nut under the head, insert the faces, and tighten the nut.

	Bodies							Replacement Handles
	Head Wt., lb.	For Face Dia.	Overall Lg.	Head Material	Handle Replaceable		Each		Each
Hickory Handle with Plain Grip



		1 1/2	1 1/4"	11"	Iron	Yes	5911A11	000000	5911A43	000000


		1 3/4	1 1/2"	12 1/2"	Iron	Yes	5911A12	00000	5911A44	00000
		2 1/2	1 3/4"	13"	Iron	Yes	5911A13	00000	5911A45	00000
		3 1/2	2"	14"	Iron	Yes	5911A14	00000	5911A46	00000
		5 1/2	2 3/4"	15 3/4"	Iron	Yes	5911A15	000000	5911A42	00000

Accessories for Bodies

Urethane Rubber and Polyethylene Faces

Urethane Rubber Face

Polyethylene Face

Polyethylene Face and Urethane Rubber Face—Polyethylene faces and urethane rubber faces are softer than metal faces, so they're good for sheet metal work.

Hard Face—Hard faces have a hardness similar to that of a bowling ball. Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.

		Hard Face (Off-White)		Extra-Hard Face (Yellow)
	Face Dia.		Each		Each
Clamping-Head Urethane Rubber Faces



		1 1/4"	5911A16	000000	———	0


		1 1/2"	5911A17	00000	———	0
		1 3/4"	5911A18	00000	———	0
		2"	5911A19	00000	———	0
		2 3/4"	5911A21	00000	———	0


		Clamping-Head Polyethylene Faces



				1 1/4"	———	0	5911A27	000000


				1 1/2"	———	0	5911A28	00000
				1 3/4"	———	0	5911A29	00000
				2"	———	0	5911A31	00000
				2 3/4"	———	0	5911A51	00000

Rawhide Leather Faces

Rawhide Leather

Faces

Rawhide Leather Face—Rawhide leather faces are more durable than plastic and won't distort the surface of soft sheet metal, such as brass, aluminum, and copper.

		Each
Clamping-Head/Press-Fit Rawhide Leather Faces



	1 1/4"	5907A18	000000


	1 1/2"	5907A19	00000
	1 3/4"	5907A21	00000
	2"	5907A22	00000
	2 3/4"	5907A23	00000

Copper Faces

Image of Product. Front orientation. Copper Face. Create-Your-Own Mallets .

Copper Faces

Copper Face—Copper faces are for use on brass, copper, aluminum, and steel.

		Each
Clamping-Head/Press-Fit Copper Faces



	1 1/4"	5905A22	00000


	1 1/2"	5905A23	00000
	1 3/4"	5905A24	00000
	2"	5905A25	00000

Replaceable-Face Dead Blow Sledge Hammers

Change out the faces when they become worn. The head on these hammers is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, choose a hammer with a face that's harder than your workpiece. Longer and heavier hammers deliver greater impact.

Screw-In Polyurethane Rubber Faces

Image of Product. Front orientation. Hammers. Replaceable-Face Dead Blow Sledge Hammers , Round Face, Screw-In Face.

Screw-in hammers have polyurethane rubber faces that resist oils and solvents and won't crack under high impact. Each face can be switched out for a face with a different hardness. The medium face has a hardness that's suitable for most general purpose applications. The extra-hard face has a hardness similar to that of a hard hat.

				Face
	Head Wt., lb.	Face Dia.	Face Hardness Rating (Face Color)	Thread Size	Thread Type	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle with Plain Grip



		7 1/2	2 1/2"	Medium (Green) × Extra Hard (Black)	7/16"-14	UNC	32"	Iron	Yes	5947A1	0000000


		7 1/2	3"	Medium (Green) × Extra Hard (Black)	1/2"-13	UNC	35"	Aluminum	Yes	5947A2	000000
		11 1/2	3"	Medium (Green) × Extra Hard (Black)	1/2"-13	UNC	35"	Iron	Yes	5947A3	000000

Polyurethane Rubber Faces

Polyurethane

Rubber Face

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

		Face		Soft (Orange)		Medium (Green)		Hard (Red)		Extra Hard (Black)
	Face Dia.	Thread Size	Thread Type		Each		Each		Each		Each
Screw-In Polyurethane Rubber Faces



		2 1/2"	7/16"-14	UNC	6047A35	000000	6047A45	000000	6047A55	000000	6047A65	000000


		3"	1/2"-13	UNC	6047A36	00000	6047A46	00000	6047A56	00000	6047A66	00000

Press-Fit Nylon Face

Press-fit hammers have nylon plastic faces with a hardness similar to that of a bowling ball.

	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle with Plain Grip



	13 1/4	4"	Hard (White)	39 1/4"	Steel	Yes	3218N11	0000000


	19 3/4	4"	Hard (White)	39 1/4"	Steel	Yes	3218N12	000000

Nylon Faces

Create-Your-Own Sledge Hammers

Assembled Hammer

Swing these long, heavy hammers with both hands to demolish material, form metal, and drive punches, chisels, and masonry drills. Mix faces of different materials or hardnesses to create the perfect striking tool. For demolition work, choose faces that are harder than your workpiece. The head has two pieces that clamp together to grip faces tightly.

Bodies with Clamping-Head Face Mount


	Clamping-Head Face

Bodies consist of a head, nut, and handle. To assemble, loosen the nut under the head, insert the faces, and tighten the nut.

	Bodies							Replacement Handles
	Head Wt., lb.	For Face Dia.	Overall Lg.	Head Material	Handle Replaceable		Each		Each
Hickory Handle with Plain Grip



		7	2 3/4"	36"	Iron	Yes	5911A25	0000000	5911A41	000000

Accessories for Bodies

Urethane Rubber and Polyethylene Faces

Urethane Rubber Face

Polyethylene Face

Polyethylene Face and Urethane Rubber Face—Polyethylene faces and urethane rubber faces are softer than metal faces, so they're good for sheet metal work.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

		Hard Face (Off-White)		Extra-Hard Face (Yellow)
	Face Dia.		Each		Each
Clamping-Head Urethane Rubber Faces



		2 3/4"	5911A21	000000	———	0


		Clamping-Head Polyethylene Faces



				2 3/4"	———	0	5911A51	000000

Rawhide Leather Faces

Rawhide Leather

Faces

Rawhide Leather Faces—Rawhide leather faces are more durable than plastic and won't distort the surface of soft sheet metal, such as brass, aluminum, and copper.

		Each
Clamping-Head/Press-Fit Rawhide Leather Faces



	2 3/4"	5907A23	000000