Drive chisels with control and strike workpieces without damaging their surface.

When choosing a mallet, consider the face material, overall length, and head weight. To avoid marring, the face material should be softer than your workpiece. Use shorter, lighter mallets for tapping parts into place or making small cuts with a chisel. Use longer, heavier mallets for assembling joints, dislodging stuck parts, and making aggressive chisel cuts.

Replace faces when they become worn rather than replacing the entire tool. These mallets are suitable for driving chisels and striking work without damaging its surface. Choose a mallet with a face that's softer than your workpiece to avoid marring it when tapping or striking. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.

The face and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking, resist corrosion, and are nonmagnetic. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels. All have a textured grip for slip resistance. For replacement handles, see Fiberglass Hammer Handles.

Warning: Do not use these tools in direct contact with acetylene.

Also known as upholstery and pin hammers, these tools have a small head for driving tacks and pins in confined areas.