Tap threads for left-hand threaded fasteners.

Sized to cut oversized threads, these tools are often used to tap holes where the threads will shrink due to heat treatment or plating.

Use these taps on hard and abrasive material, such as heat-treated metal, nickel, and fiberglass.

Create oversized threads while keeping chips clear. These taps are sized for use in holes where the threads will shrink due to heat treatment or plating.

These taps cut left-hand threads while keeping chips clear.

Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Also known as cold-forming and fluteless taps, these press threads into material without cutting it, so no chips are created.

With a taper chamfer and bottoming chamfer at opposite ends, these taps start threads easily and are good for threading close to the bottom of closed-end holes.

Tap threads into hardened steel and iron. These cobalt steel taps have straight flutes for high durability.

A high helix angle provides the cutting strength needed to tap threads in titanium. These cobalt steel taps have an open flute design that keeps chips clear, so they don't need to be reversed to prevent buildup.

Tap left-hand threads for pipe and conduit.

Use these carbon steel taps for thread repair and occasional tapping of pipe and conduit. They can tap threads into most metal and plastic, but they have a shorter tool life than standard taps.

With a taper chamfer on one threading end and a bottoming chamfer on the other, these pipe and conduit taps can start threads easily, and they are able to thread close to the bottom of closed-end holes.

Drill and thread holes for pipe and conduit without switching tools.

Use these taps on hardened steel pipe and conduit.

Cut threads in PG thread sizes commonly used for European conduit.

Connect a tap to these wrenches for occasional or light-duty hand tapping. All have a T-handle design, so they're more compact than straight-handle tap wrenches but provide less leverage.

Use with a tap to thread holes by hand. These tools have long handles to provide more leverage than T-handle wrenches, but they require more space for tapping.

Also known as hand tappers, these wrenches mount to a flat surface for stability and guide the tap straight into the hole for accurate threading.

Sets include multiple holders for use with different tap sizes. These holders work like sockets to connect taps to ratchet wrenches.

Extend the length of your tap to access hard-to-reach areas.

Restore bolt, hole, pipe, and conduit threading with this set of four files.

These tools have adjustable blades to repair any inch or metric thread size. Use them on threaded holes with an ID from 5/16" to 1-1/4" or 8 mm to 32 mm.

For start-to-finish tapping of left-hand threads, these sets include one taper-, one plug-, and one bottoming-chamfer tap.

Multiple tap sizes allow tapping a range of hole diameters. Connect these taps directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.

All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers.