About External and Internal Grip Pullers
More
Forcing Screws for Pullers
Make your old puller work like new by replacing worn forcing screws.
Thread Size | Lg. | Material | Head Style | Each | |
5/16"-24 | 4 1/8" | Steel | T-Handle | 000000 | 000000 |
5/16"-24 | 5 1/2" | Steel | T-Handle | 00000000 | 00000 |
3/8"-24 | 7" | Steel | T-Handle | 00000000 | 00000 |
1/2"-20 | 9" | Steel | Hex | 00000000 | 0000 |
9/16"-16 | 10 1/8" | Steel | Hex | 00000000 | 00000 |
9/16"-20 | 6 7/8" | Steel | Hex | 0000000 | 00000 |
5/8"-14 | 12 3/4" | Steel | Hex | 00000000 | 00000 |
5/8"-18 | 5 1/2" | Steel | Hex | 0000000 | 00000 |
5/8"-18 | 13" | Steel | Hex | 0000000 | 00000 |
11/16"-18 | 9" | Steel | Hex | 0000000 | 00000 |
3/4"-14 | 16 1/4" | Steel | Hex | 00000000 | 00000 |
3/4"-14 | 19 1/4" | Steel | Hex | 00000000 | 00000 |
7/8"-9 | 8" | Steel | Hex | 0000000 | 000000 |
1"-14 | 13 3/4" | Steel | Hex | 0000000 | 000000 |
1 1/8"-14 | 26" | Steel | Hex | 00000000 | 000000 |
1 1/4"-12 | 16" | Steel | Hex | 0000000 | 000000 |
1 1/4"-14 | 31 1/2" | Steel | Hex | 00000000 | 000000 |
1 1/2"-6 | 14" | Steel | Hex | 0000000 | 000000 |
Step-Plate Adapters for Pullers
Pull bearings, gears, and other parts from hollow shafts and housings. Place one of these adapters in the end of your hollow shaft to provide a surface for the forcing screw to push against.
For technical drawings and 3-D models, click on a part number.
Threaded Adapters for Pullers
Use adapters on the ends of forcing screws and face-grip puller legs when pulling shafts, bearing caps, and pinions.
For technical drawings and 3-D models, click on a part number.
Thread Size | Gender | Each | |
1/4"-20 × 5/8"-18 | Male × Female | 000000 | 000000 |
5/16"-18 × 5/8"-18 | Male × Female | 000000 | 00000 |
3/8"-16 × 5/8"-18 | Male × Female | 000000 | 00000 |
3/8"-24 × 5/8"-18 | Male × Female | 000000 | 00000 |
7/16"-14 × 5/8"-18 | Male × Female | 000000 | 00000 |
7/16"-20 × 5/8"-18 | Male × Female | 000000 | 00000 |
1/2"-13 × 5/8"-18 | Male × Female | 000000 | 00000 |
1/2"-20 × 5/8"-18 | Male × Female | 000000 | 00000 |
5/8"-18 × 1"-14 | Male × Female | 000000 | 00000 |
Hub and Fan Blade External Grip Puller Sets
Remove press-fit hubs and fan blades in a variety of sizes. Set includes a hub adapter and long jaws so you can grip larger components.
For hub-mounted components such as blower wheels, secure the puller with the included set screws. For fan blades, attach the puller with the removable jaws, hooking a jaw around each fan blade to secure.
Puller Material | Jaw Material | Forcing Screw Material | Includes | Each | |
Aluminum | Steel | Steel | 4-Jaw Puller (For 3"-6" OD; 1 1/2" Reach; 1/4" Width × 1" Long Tip) Forcing Screw (1/2"-20 Thread Size; 9" Long) Four Long Jaws (For 3"-8 1/2" OD; 2 5/8" Reach) Hub Adapter (For 2 3/4" OD) Three Set Screws Plastic Case | 00000000 | 000000 |
Hub and Fan Blade External Grip Pullers
A must-have for HVAC jobs, this puller makes quick work of removing press-fit hubs and fan blades from motor shafts.
For hub-mounted components such as blower wheels, secure the puller with the included set screws. For fan blades, attach the puller with the removable jaws, hooking a jaw around each fan blade to secure.
Optional hub adapter and optional long jaws (each sold separately) are for gripping larger components.
For technical drawings and 3-D models, click on a part number.
Jaw Tip | Forcing Screw | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For OD | For Shaft OD | For Hub OD | Reach | Puller Material | Jaw Material | Forcing Screw Material | Wd. | Thick. | Overall Lg. | Thread Size | Each | |
3"-6" | 0.625" | 1 3/4" | 1 1/2" | Aluminum | Steel | Steel | 1/4" | 1/4" | 9" | 1/2"-20 | 00000000 | 000000 |
Reversible Jaw External/Internal Grip Puller Sets
Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces. Combination 2/3-jaw pullers have mounting holes in both a two-jaw and three-jaw configuration, so you can attach the jaws either way. However, these pullers don't have a jaw control mechanism, so their arms swing freely. Three-jaw pullers are more stable and more evenly distribute pulling force than two-jaw pullers. Use them when space allows.
Capacity, tons | Puller Material | Includes | Each | |
Two Jaws and Combination 2/3 Jaws | ||||
---|---|---|---|---|
Not Rated | Steel | Crossbar Oil-Seal Puller Hook 2-Jaw Jaw Bar 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer Three Sets of Jaws (2 3/8", 4 1/8", and 6 1/2" Reaches) | 0000000 | 0000000 |
5-7 | Steel | 2-Jaw Bridge-Style Internal Grip Puller (For 7/8"-2" ID; 1" Reach) 2-Jaw External Grip Puller—5-ton Capacity (For Up To 6" OD; 5 1/2" Reach) 2-Jaw External Grip Puller—7-ton Capacity (For Up To 9" OD; 5" Reach) 2-Jaw Internal Grip Puller (For 7/8"-2 1/8" ID; 1" Reach) with 1 3/4-lb. Slide Hammer 2-Jaw Jaw Bar for 2/3 Reversible-Jaw External/Internal Grip Puller 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/2"-4 1/4" ID; For 1 1/2"-4 1/2" OD; 3 1/2" Reach) with Slide Hammer 2/3-Jaw External Grip Puller—7-ton Capacity (For Up To 11" OD; 8 3/4" Reach) Adjustable Face-Grip Puller (For Up To 4 5/8" OD; 4 3/4" Reach) with 5 5/8” Long Forcing Screw Bearing Separator (1/2"-4 1/4" Spread) Bearing Separator (1/8"-1 7/8" Spread) Face-Grip Puller (For 1 1/2"-4 1/4" OD) with 5 1/2” Long Forcing Screw Face-Grip Puller (For 2"-7 3/4" OD) with 11 5/8” Long Forcing Screw Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller | 0000000 | 00000000 |
Optional Crossbars for 6337K1 (25 tons; Includes: Forcing Screw) | 0000000 | Each | 0000000 |
Optional Straight-Tip Jaws for 6337K1 (25 tons; 10" Reach) | 0000000 | Pair | 000000 |
Replacement Tapered-Tip Jaws for 6337K1 (5 tons; 6" Reach) | 0000000 | Pair | 000000 |
Replacement Crossbars for 6337K1 (5 tons; Includes: Forcing Screw) | 0000000 | Each | 000000 |
Optional Straight-Tip Jaws for 6337K1 (25 tons; 6" Reach) | 0000000 | Pair | 000000 |
Replacement Straight-Tip Jaws for 6337K1 (5 tons; 8" Reach) | 0000000 | Pair | 000000 |
Replacement Straight-Tip Jaws for 6337K1 (5 tons; 6" Reach) | 0000000 | Pair | 000000 |
Replacement Straight-Tip Jaws for 6337K1 (5 tons; 5" Reach) | 0000000 | Pair | 000000 |
Replacement Adjusting Cone for 6317K34 | 00000000 | Each | 00000 |
Reversible Jaw External/Internal Grip Puller Sets with Locking Storage Box
Complete with a locking storage box, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Puller Material | Includes | Each | |
Steel | Internal Extractor (for 1/2"-1-7/8" ID; 1-1/2" Reach) Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Steel Locking Storage Box (25 3/4" Height; 29 1/2" Width; 10" Depth) 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID; For 1/4"-6" OD; 4-3/4" Reach) with Slide Hammer Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw Combination 2/3-Jaw External Grip Puller—7 1/2-ton Capacity (For Up To 10 1/2" OD; 5" Reach) Combination 2/3-Jaw External Grip Puller—5 1/2-ton Capacity (For Up To 7" OD; 3 1/4" Reach) Two Sets of Long-Reach Jaws (Three Jaws for 5 1/2-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller) Bearing Separator (1/4"-1 3/4 Spread) Bearing Separator (3/4"-4 1/4" Spread) | 00000000 | 000000000 |
Reversible Jaw External/Internal Grip Pullers
Grip objects on the outside or inside to tackle both types of pulling jobs. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Puller has combination 2/3 jaws—it comes with a jaw bar so you can change between 2-jaw and 3-jaw configurations to suit your application. Use the slide hammer to extract hard-to-remove objects.
Optional crossbar allows you to pull objects that have tapped holes. Thread the center hole onto the slide hammer; requires two 3/8" dia. cap screws (not included).
Replacement jaw bar converts the 3-jaw puller to a 2-jaw puller.
For ID | For OD | Reach | Puller Material | T-Handle Material | Each | |
1 1/4"-4 1/4" | 1"-4 1/2" | 1 1/4", 3" | Steel | Steel | 000000 | 0000000 |
Optional Internal Jaws (For 3/4"-2 1/2" ID; 2 3/8" Reach) | 0000000 | Each | 000000 |
Optional External/Internal Jaws (For 1 1/4"-3 1/2" ID; For 1"-4 1/2" OD; 3 3/4" Reach) | 0000000 | Each | 00000 |
Optional External/Internal Jaws (For 1 1/2"-4 1/2" ID; For 3/4"-5" OD; 4 1/8" Reach) | 0000000 | Each | 00000 |
Optional External/Internal Jaws (For 2 3/4"-5 1/2" ID; For 3/4"-7 1/2" OD; 6 1/2" Reach) | 0000000 | Each | 00000 |
Optional 5-lb. Slide Hammer (5/8"-18 Thread Size) | 000000 | Each | 00000 |
Replacement Jaw Bar (5/8"-18 Thread Size) | 000000 | Each | 00000 |
Optional Puller Hook (For 5/8" Minimum ID) | 000000 | Each | 00000 |
Optional Crossbar (For 1 7/8"-5 5/8" ID; For 1 7/8"-5 5/8" OD; For 0.375" Dia. Cap Screw; Fasteners Included: No) | 000000 | Each | 00000 |
Replacement 2 1/2-lb. Slide Hammer (5/8"-18 Thread Size) | 000000 | Each | 00000 |
Replacement Adjusting Cone | 00000000 | Each | 00000 |
Quick-Hold Reversible Jaw External/Internal Grip Puller Sets
To quickly grip objects from either the outside or inside, all the pullers in these sets have reversible jaws that stay aligned. The jaws slide along the bar, so the arms are always straight at 90° and won’t kick out like they do in caged pullers. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
The pullers in these sets can either be used with two or three jaws. Use two jaws for tight spots where three jaws won’t fit. When space allows, pullers with three jaws are more stable and more evenly distribute pulling force compared to pullers with two jaws.
Narrow-profile jaws also have narrow tips for gripping objects in tight spaces.
Capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
Capacity, tons | Puller Material | Forcing Screw Material | Forcing Screw Thread Size | Includes | Each | |
Narrow Profile—Bar Control | ||||||
---|---|---|---|---|---|---|
Combination 2/3 Jaws with Tips on One End | ||||||
5 1/2 | Steel | Steel | M14 x 1.5 mm | Quick-Hold 2-Jaw Reversible External/Internal Grip Puller Three Sets of Narrow-Profile Jaws (For 2 3/4"-7 1/8" ID; For 1 1/16"-5 1/8" OD; 3 15/16"-9 13/16" Reach) Set of Jaw Extensions (3 15/16" Long) Forcing Screws (1 of each: 6 5/16" Long; 9 13/16" Long) 2-to-3 Jaw Converter Grease Plastic Case | 0000000 | 0000000 |
Standard and Narrow Profile—Bar Control | ||||||
Combination 2/3 Jaws with Tips on One End | ||||||
7 1/2 | Steel | Steel | 1/2"-14 | Quick-Hold 2-Jaw Reversible External/Internal Grip Puller One Set of Narrow-Profile Jaws (For 3 7/8"-10 1/4" ID; For 1 3/8"-7 7/8" OD; 5 15/16"-11 13/16" Reach) One Set of Standard-Profile Jaws (For 3 7/8"-10 1/4" ID; For 1 3/8"-7 7/8" OD; 5 15/16"-11 13/16" Reach) Two Sets of Jaw Extensions (5 15/16" Long) Forcing Screws (1 of each: 8 5/16" Long; 14" Long) 2-to-3 Jaw Converter Grease Plastic Case | 0000000 | 00000000 |
Adjustable Face-Grip Puller Sets
Also known as steering wheel and flywheel pullers, you can change the bolt configuration on these pullers to fit a variety of tapered hole patterns.
Puller Material | Includes | Each | |
Steel | Adjustable Face-Grip Puller (For Up To 3" OD; 3 1/8" Reach) with 4 1/2” Long Forcing Screw Six Cap Screws (2 of Each: 3/8"-16 x 4" Lg., 5/16"-18 x 4" Lg., and 5/16"-24 x 4" Lg.) Two Washers | 00000000 | 000000 |
Steel | 3 Tension Bolts Hex Head Shaft Screws (3 Each: 3/8“-16 x 2“ Lg., 3/8"-16 x 3-1/4" Lg., 3/8“-16 x 4-1/2“ Lg., 3/8"-24 x 3" Lg., 1/4"-28 x 3" Lg.) Hex Head Shaft Screws (3 Each: 5/16“-18 x 3-1/2" Lg., 5/16"-18 x 4" Lg., 5/16"-24 x 3" Lg., M8 x 45 mm Lg., M8 x 65 mm Lg.) Hex Head Shaft Screws (3 Each: M8 X 90 mm Lg., M10 x 45 mm Lg.) 4 Spindle Protectors for Pullers Adjustable Face-Grip Puller (For Up to 5-9/10" OD; 5-9/10" Reach) with 5-1/8" Long Spindle Nut for Pulling and Pushing | 00000000 | 000000 |