Headless Clevis Pins

	System of Measurement System of Measurement

Inch

Metric

	Diameter Diameter

	Length Length

	Usable Length Usable Length

	Head Type Head Type


Retaining Ring Groove	Through Hole

Plain	Tapped

Set Screw Flat	Threaded

	End Type End Type


Retaining Ring Groove	Through Hole

Threaded	Tapped

Set Screw Flat

	Material Material

Steel

Stainless Steel

	Pin Type Pin Type

	Clevis
	Made to Order

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

DFARS Specialty Metals
Compliant

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Groove Width Groove Width

	Through Hole Diameter Through Hole Diameter

	Thread Size Thread Size

	For Maximum Cotter Pin Diameter For Maximum Cotter Pin Diameter

	Thread Length Thread Length

	Minimum (ORDERING) Groove Diameter Minimum (ORDERING) Groove Diameter

	Maximum (ORDERING) Groove Diameter Maximum (ORDERING) Groove Diameter

319 Products

Headless Clevis Pins with Retaining Ring Grooves

Install or remove these pins from either side. Slide the included retaining rings into the grooves for a secure hold that takes up less space than a cotter pin. Replacement retaining rings are sold separately.

Zinc-plated steel pins have good strength and some corrosion resistance.

18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.

For technical drawings and 3-D models, click on a part number.

Zinc-Plated 1004-1045 Carbon Steel
Usable Lg.	Lg.	Dia. Tolerance	Min. Hardness	Includes		Each
3/16" Dia.
1/2"	3/4"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
2"	2 1/4"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
1/4" Dia.
1/2"	7/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
2"	2 3/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
3"	3 1/2"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
3/8" Dia.
3/4"	1 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1 3/4"	2 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
2 1/4"	2 3/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1/2" Dia.
1 3/4"	2 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
2 1/4"	2 3/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2 3/4"	3 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3 1/4"	3 5/8"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
3 1/2"	4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3 3/4"	4 1/8"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
4"	4 1/2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
4 1/4"	4 1/8"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
4 3/4"	5 1/8"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
3/4" Dia.
1 1/2"	2 1/4"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
1 3/4"	2 1/2"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
2"	2 3/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
2 1/4"	3"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
2 1/2"	3 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2 3/4"	3 1/2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3"	3 3/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3 1/4"	4"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
3 1/2"	4 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3 3/4"	4 1/2"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
4 1/4"	5"	-0.002" to 0"	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
12mm Dia.
27mm	37mm	-0.060mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
47mm	57mm	-0.060mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
57mm	67mm	-0.060mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
Zinc-Plated 1215 Carbon Steel
3/16" Dia.
3/4"	1 1/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1"	1 3/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1/4" Dia.
3/4"	1 1/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1"	1 3/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
5/16" Dia.
3/4"	1 1/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1"	1 3/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
3/8" Dia.
1"	1 3/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
2"	2 3/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
2 1/2"	2 7/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
3"	3 3/8"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1/2" Dia.
1"	1 1/2"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1 1/4"	1 3/4"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
1 1/2"	2"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
2"	2 1/2"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
2 1/2"	3"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
3"	3 1/2"	-0.002" to 0"	Rockwell B80	Two Black-Phosphate Spring Steel Retaining Rings	000000000	0000
3mm Dia.
10mm	16mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
16mm	22mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
20mm	26mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
24mm	30mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
4mm Dia.
10mm	16mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
16mm	22mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
20mm	26mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
24mm	30mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
6mm Dia.
12mm	18mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
20mm	26mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
24mm	30mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
30mm	36mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	0000
8mm Dia.
20mm	26mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
24mm	30mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
30mm	36mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
40mm	48mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
10mm Dia.
24mm	30mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
30mm	36mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
40mm	48mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
50mm	60mm	-0.050mm to 0mm	Rockwell B80	Two Zinc-Chromate Plated Spring Steel Retaining Rings	000000000	00000
18-8 Stainless Steel
3/16" Dia.
1/2"	3/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
3/4"	1 1/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1"	1 3/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
2"	2 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1/4" Dia.
1/2"	7/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
3/4"	1 1/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1"	1 3/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
2"	2 3/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
3"	3 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
5/16" Dia.
3/4"	1 1/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1"	1 3/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2"	2 3/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3/8" Dia.
1/2"	7/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
3/4"	1 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1"	1 3/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
1 1/2"	1 7/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
1 3/4"	2 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2"	2 3/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2 1/4"	2 3/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2 1/2"	2 7/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3"	3 3/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
1/2" Dia.
1"	1 1/2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
1 1/4"	1 3/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
1 1/2"	2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
1 3/4"	2 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2"	2 1/2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2 1/4"	2 3/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2 1/2"	3"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2 3/4"	3 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3"	3 1/2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3 1/4"	3 5/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3 1/2"	4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3 3/4"	4 1/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
4"	4 1/2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
4 1/4"	4 5/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
4 3/4"	5 1/8"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
5/8" Dia.
2 1/2"	3"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3"	3 1/2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3/4" Dia.
1 1/2"	2 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
1 3/4"	2 1/2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2"	2 3/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2 1/4"	3"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2 1/2"	3 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
2 3/4"	3 1/2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3"	3 3/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3 1/4"	4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3 1/2"	4 1/4"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3 3/4"	4 1/2"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
4 1/4"	5"	-0.002" to 0"	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
3mm Dia.
10mm	16mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
16mm	22mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
20mm	26mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
24mm	30mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
4mm Dia.
10mm	16mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
16mm	22mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
20mm	26mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
24mm	30mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
6mm Dia.
12mm	18mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	0000
20mm	26mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
24mm	30mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
30mm	36mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
8mm Dia.
20mm	26mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
24mm	30mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
30mm	36mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
40mm	48mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
10mm Dia.
24mm	30mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
30mm	36mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
40mm	48mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
50mm	60mm	-0.050mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
12mm Dia.
32mm	42mm	-0.060mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000
37mm	47mm	-0.060mm to 0mm	Rockwell B80	Two Stainless Steel Retaining Rings	000000000	00000

Install or remove these pins from either side. Lock them in place with the included cotter pins.

Zinc-plated steel pins have good strength and some corrosion resistance.

18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic.

For technical drawings and 3-D models, click on a part number.

Zinc-Plated 1004-1045 Carbon Steel
Usable Lg,	Lg,	Dia. Tolerance	Through Hole Dia.	For Max. Cotter Pin Dia.	Min. Hardness		Each
1/4" Dia.
1/2"	7/8"	-0.002" to 0.000"	0.109"	0.107"	Rockwell B80	000000000	00000
2"	2 3/8"	-0.002" to 0.000"	0.109"	0.107"	Rockwell B80	000000000	0000
3/8" Dia.
3/4"	1 1/4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	0000
1 3/4"	2 1/4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	0000
2 1/4"	2 3/4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	0000
1/2" Dia.
1 3/4"	2 1/4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	0000
2 1/4"	2 3/4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	0000
2 3/4"	3 1/4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	0000
3 1/2"	4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	0000
4"	4 1/2"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	0000
3/4" Dia.
2"	2 3/4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	00000
2 1/2"	3 1/4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	00000
2 3/4"	3 1/2"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	00000
3"	3 3/4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	00000
3 1/2"	4 1/4"	-0.002" to 0.000"	0.172"	0.154"	Rockwell B80	000000000	00000
Zinc-Plated 1215 Carbon Steel
3/16" Dia.
3/4"	1 1/8"	-0.002" to 0.000"	5/64"	5/64"	Rockwell B80	000000000	0000
1"	1 3/8"	-0.002" to 0.000"	5/64"	5/64"	Rockwell B80	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0.000"	5/64"	5/64"	Rockwell B80	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0.000"	5/64"	5/64"	Rockwell B80	000000000	0000
1/4" Dia.
3/4"	1 1/8"	-0.002" to 0.000"	5/64"	5/64"	Rockwell B80	000000000	0000
1"	1 3/8"	-0.002" to 0.000"	5/64"	5/64"	Rockwell B80	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0.000"	5/64"	5/64"	Rockwell B80	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0.000"	5/64"	5/64"	Rockwell B80	000000000	0000
5/16" Dia.
3/4"	1 1/8"	-0.002" to 0.000"	7/64"	7/64"	Rockwell B80	000000000	0000
1"	1 3/8"	-0.002" to 0.000"	7/64"	7/64"	Rockwell B80	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0.000"	7/64"	7/64"	Rockwell B80	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0.000"	7/64"	7/64"	Rockwell B80	000000000	0000
3/8" Dia.
1"	1 3/8"	-0.002" to 0.000"	7/64"	7/64"	Rockwell B80	000000000	0000
1 1/4"	1 5/8"	-0.002" to 0.000"	7/64"	7/64"	Rockwell B80	000000000	0000
1 1/2"	1 7/8"	-0.002" to 0.000"	7/64"	7/64"	Rockwell B80	000000000	0000
2"	2 3/8"	-0.002" to 0.000"	7/64"	7/64"	Rockwell B80	000000000	0000
2 1/2"	2 7/8"	-0.002" to 0.000"	7/64"	7/64"	Rockwell B80	000000000	0000
3"	3 3/8"	-0.002" to 0.000"	7/64"	7/64"	Rockwell B80	000000000	0000
1/2" Dia.
1"	1 1/2"	-0.002" to 0.000"	9/64"	9/64"	Rockwell B80	000000000	0000
1 1/4"	1 3/4"	-0.002" to 0.000"	9/64"	9/64"	Rockwell B80	000000000	0000
1 1/2"	2"	-0.002" to 0.000"	9/64"	9/64"	Rockwell B80	000000000	0000
2"	2 1/2"	-0.002" to 0.000"	9/64"	9/64"	Rockwell B80	000000000	0000
2 1/2"	3"	-0.002" to 0.000"	9/64"	9/64"	Rockwell B80	000000000	0000
3"	3 1/2"	-0.002" to 0.000"	9/64"	9/64"	Rockwell B80	000000000	0000
18-8 Stainless Steel
3/16" Dia.
11"	12"	-0.005" to 0.004"	3/32"	5/64"	Rockwell B80	000000000	00000
1/4" Dia.
11"	12"	-0.004" to 0.004"	3/32"	5/64"	Rockwell B80	000000000	00000
15"	16"	-0.004" to 0.004"	3/32"	5/64"	Rockwell B80	000000000	00000
5/16" Dia.
11"	12"	-0.005" to 0.004"	1/8"	7/64"	Rockwell B80	000000000	00000
3/8" Dia.
11"	12"	-0.004" to 0.004"	1/8"	7/64"	Rockwell B80	000000000	00000
1/2" Dia.
11"	12"	-0.004" to 0.004"	5/32"	5/32"	Rockwell B80	000000000	00000
15"	16"	-0.004" to 0.004"	5/32"	5/32"	Rockwell B80	000000000	00000

Made-to-Order Pins

Choose a material, head type, end type, and size to create a custom pin.

Steel pins have good strength.

Stainless steel pins are more corrosion resistant than steel pins. 18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic. 416 stainless steel pins are more wear-resistant than other stainless pins. They have some corrosion resistance and are magnetic.

Plain × Retaining Ring Groove

Retaining Ring Groove

							Each
Dia.	Choose a Material	Choose a Lg.	Choose a Groove Wd.	Choose a Groove Dia.	Choose a Distance from Groove Edge to Pin End		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.19"-0.249"	Min. of 0.25"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.252"-0.311"	Min. of 0.25"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.315"-0.374"	Min. of 0.25"	00000000	00000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.44"-0.499"	Min. of 0.25"	00000000	00000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.565"-0.624"	Min. of 0.25"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.69"-0.749"	Min. of 0.25"	00000000	000000	00000	00000

Plain × Through Hole

Through Hole

						Each
Dia.	Choose a Material	Choose a Lg.	Choose a Through Hole Dia., in.	Choose a Distance from Center of Hole to Pin End		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	3/64, 1/16, 5/64	Min. of 0.25"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	3/32, 7/64, 1/8	Min. of 0.25"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	9/64, 5/32	Min. of 0.25"	00000000	00000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	11/64, 13/64, 15/64	Min. of 0.25"	00000000	00000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	17/64, 5/16, 3/8	Min. of 0.25"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	7/16, 1/2	Min. of 0.25"	00000000	000000	00000	00000

Plain × Tapped

Tapped

						Each
Dia.	Choose a Material	Choose a Lg.	Choose a Thread Size	Thread Lg.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	6-32, 8-32	1/2"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	8-32, 10-32	1/2"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	10-32, 1/4"-20	1/2"	00000000	00000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	5/16"-18, 3/8"-16	1/2"	00000000	00000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	3/8"-16, 1/2"-13	1/2"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	1/2"-13, 5/8"-11	1/2"	00000000	000000	00000	00000

Plain × Threaded

Threaded

Length refers to the unthreaded portion of the pin.

						Each
Dia.	Choose a Material	Choose a Lg.	Thread Size	Thread Lg.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	10-32	1/4"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	1/4"-20	7/16"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	5/16"-18	1/2"	00000000	00000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	3/8"-16	5/8"	00000000	00000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	1/2"-13	3/4"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	5/8"-11	7/8"	00000000	000000	00000	00000

Plain × Set Screw Flat

Set Screw Flat

							Each
Dia.	Choose a Material	Choose a Lg.	Flat Dp.	Choose a Distance from Flat Edge to Pin End	Choose a Flat Wd.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	00000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	00000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000

Retaining Ring Groove × Retaining Ring Groove

Retaining Ring Groove

			First Pin End			Second Pin End				Each
Dia.	Choose a Material	Choose a Lg.	Choose a Groove Wd.	Choose a Groove Dia.	Choose a Distance from Groove Edge to Pin End	Choose a Groove Wd.	Choose a Groove Dia.	Choose a Distance from Groove Edge to Pin End		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.19"-0.249"	Min. of 0.25"	Min. of 0.03"	0.19"-0.249"	Min. of 0.25"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.252"-0.311"	Min. of 0.25"	Min. of 0.03"	0.252"-0.311"	Min. of 0.25"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.315"-0.374"	Min. of 0.25"	Min. of 0.03"	0.315"-0.374"	Min. of 0.25"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.44"-0.499"	Min. of 0.25"	Min. of 0.03"	0.44"-0.499"	Min. of 0.25"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.565"-0.624"	Min. of 0.25"	Min. of 0.03"	0.565"-0.624"	Min. of 0.25"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.69"-0.749"	Min. of 0.25"	Min. of 0.03"	0.69"-0.749"	Min. of 0.25"	00000000	000000	00000	00000

Retaining Ring Groove × Through Hole

Retaining Ring Groove

Through Hole

									Each
Dia.	Choose a Material	Choose a Lg.	Choose a Groove Wd.	Choose a Groove Dia.	Choose a Distance from Groove Edge to Pin End	Choose a Through Hole Dia., in.	Choose a Distance from Center of Hole to Pin End		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.19"-0.249"	Min. of 0.25"	3/64, 1/16, 5/64	Min. of 0.25"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.252"-0.311"	Min. of 0.25"	3/32, 7/64, 1/8	Min. of 0.25"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.315"-0.374"	Min. of 0.25"	9/64, 5/32	Min. of 0.25"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.44"-0.499"	Min. of 0.25"	11/64, 13/64, 15/64	Min. of 0.25"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.565"-0.624"	Min. of 0.25"	17/64, 5/16, 3/8	Min. of 0.25"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.69"-0.749"	Min. of 0.25"	7/16, 1/2	Min. of 0.25"	00000000	000000	00000	00000

Retaining Ring Groove × Tapped

Retaining Ring Groove

Tapped

									Each
Dia.	Choose a Material	Choose a Lg.	Choose a Groove Wd.	Choose a Groove Dia.	Choose a Distance from Groove Edge to Pin End	Choose a Thread Size	Thread Lg.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.19"-0.249"	Min. of 0.25"	6-32, 8-32	1/2"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.252"-0.311"	Min. of 0.25"	8-32, 10-32	1/2"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.315"-0.374"	Min. of 0.25"	10-32, 1/4"-20	1/2"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.44"-0.499"	Min. of 0.25"	5/16"-18, 3/8"-16	1/2"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.565"-0.624"	Min. of 0.25"	3/8"-16, 1/2"-13	1/2"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.69"-0.749"	Min. of 0.25"	1/2"-13, 5/8"-11	1/2"	00000000	000000	00000	00000

Retaining Ring Groove × Threaded

Retaining Ring Groove

Threaded

Length refers to the unthreaded portion of the pin.

									Each
Dia.	Choose a Material	Choose a Lg.	Choose a Groove Wd.	Choose a Groove Dia.	Choose a Distance from Groove Edge to Pin End	Thread Size	Thread Lg.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.19"-0.249"	Min. of 0.25"	10-32	1/4"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.252"-0.311"	Min. of 0.25"	1/4"-20	7/16"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.315"-0.374"	Min. of 0.25"	5/16"-18	1/2"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.44"-0.499"	Min. of 0.25"	3/8"-16	5/8"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.565"-0.624"	Min. of 0.25"	1/2"-13	3/4"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.69"-0.749"	Min. of 0.25"	5/8"-11	7/8"	00000000	000000	00000	00000

Retaining Ring Groove × Set Screw Flat

Retaining Ring Groove

Set Screw Flat

										Each
Dia.	Choose a Material	Choose a Lg.	Choose a Groove Wd.	Choose a Groove Dia.	Choose a Distance from Groove Edge to Pin End	Flat Dp.	Choose a Distance from Flat Edge to Pin End	Choose a Flat Wd.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.19"-0.249"	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	Min. of 0.03"	0.252"-0.311"	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.315"-0.374"	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.44"-0.499"	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.565"-0.624"	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	Min. of 0.03"	0.69"-0.749"	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000

Through Hole × Through Hole

Through Hole

								Each
Dia.	Choose a Material	Choose a Lg.	Choose First End Through Hole Dia., in.	Choose First End Distance from Center of Hole to Pin End	Choose Second End Through Hole Dia., in.	Choose Second End Distance from Center of Hole to Pin End		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	3/64, 1/16, 5/64	Min. of 0.25"	3/64, 1/16, 5/64	Min. of 0.25"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	3/32, 7/64, 1/8	Min. of 0.25"	3/32, 7/64, 1/8	Min. of 0.25"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	9/64, 5/32	Min. of 0.25"	9/64, 5/32	Min. of 0.25"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	11/64, 13/64, 15/64	Min. of 0.25"	11/64, 13/64, 15/64	Min. of 0.25"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	17/64, 5/16, 3/8	Min. of 0.25"	17/64, 5/16, 3/8	Min. of 0.25"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	7/16, 1/2	Min. of 0.25"	7/16, 1/2	Min. of 0.25"	00000000	000000	00000	00000

Through Hole × Tapped

Tapped

Through Hole

								Each
Dia.	Choose a Material	Choose a Lg.	Choose a Through Hole Dia., in.	Choose a Distance from Center of Hole to Pin End	Choose a Thread Size	Thread Lg.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	3/64, 1/16, 5/64	Min. of 0.25"	6-32, 8-32	1/2"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	3/32, 7/64, 1/8	Min. of 0.25"	8-32, 10-32	1/2"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	9/64, 5/32	Min. of 0.25"	10-32, 1/4"-20	1/2"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	11/64, 13/64, 15/64	Min. of 0.25"	5/16"-18, 3/8"-16	1/2"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	17/64, 5/16, 3/8	Min. of 0.25"	3/8"-16, 1/2"-13	1/2"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	7/16, 1/2	Min. of 0.25"	1/2"-13, 5/8"-11	1/2"	00000000	000000	00000	00000

Through Hole × Threaded

Threaded

Through Hole

Length refers to the unthreaded portion of the pin.

								Each
Dia.	Choose a Material	Choose a Lg.	Choose a Through Hole Dia., in.	Choose a Distance from Center of Hole to Pin End	Thread Size	Thread Lg.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	3/64, 1/16, 5/64	Min. of 0.25"	10-32	1/4"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	3/32, 7/64, 1/8	Min. of 0.25"	1/4"-20	7/16"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	9/64, 5/32	Min. of 0.25"	5/16"-18	1/2"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	11/64, 13/64, 15/64	Min. of 0.25"	3/8"-16	5/8"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	17/64, 5/16, 3/8	Min. of 0.25"	1/2"-13	3/4"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	7/16, 1/2	Min. of 0.25"	5/8"-11	7/8"	00000000	000000	00000	00000

Through Hole × Set Screw Flat

Set Screw Flat

Through Hole

									Each
Dia.	Choose a Material	Choose a Lg.	Choose a Through Hole Dia., in.	Choose a Distance from Center of Hole to Pin End	Flat Dp.	Choose a Distance from Flat Edge to Pin End	Choose a Flat Wd.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	3/64, 1/16, 5/64	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	3/32, 7/64, 1/8	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	9/64, 5/32	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	11/64, 13/64, 15/64	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	17/64, 5/16, 3/8	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	7/16, 1/2	Min. of 0.25"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000

Tapped × Tapped

Tapped

							Each
Dia.	Choose a Material	Choose a Lg.	Choose a Thread Size for First Pin End	Choose a Thread Size for Second Pin End	Thread Lg.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	6-32, 8-32	6-32, 8-32	1/2"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	8-32, 10-32	8-32, 10-32	1/2"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	10-32, 1/4"-20	10-32, 1/4"-20	1/2"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	5/16"-18, 3/8"-16	5/16"-18, 3/8"-16	1/2"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	3/8"-16, 1/2"-13	3/8"-16, 1/2"-13	1/2"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	1/2"-13, 5/8"-11	1/2"-13, 5/8"-11	1/2"	00000000	000000	00000	00000

Tapped × Threaded

Tapped

Threaded

Length refers to the unthreaded portion of the pin.

								Each
Dia.	Choose a Material	Choose a Lg.	Choose a Tapped End Thread Size	Tapped End Thread Lg.	Threaded End Thread Size	Threaded End Thread Lg.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	6-32, 8-32	1/2"	10-32	1/4"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	8-32, 10-32	1/2"	1/4"-20	7/16"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	1/4"-20, 10-32	1/2"	5/16"-18	1/2"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	5/16"-18, 3/8"-16	1/2"	3/8"-16	5/8"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	3/8"-16, 1/2"-13	1/2"	1/2"-13	3/4"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	1/2"-13, 5/8"-11	1/2"	5/8"-11	7/8"	00000000	000000	00000	00000

Tapped × Set Screw Flat

Set Screw Flat

Tapped

									Each
Dia.	Choose a Material	Choose a Lg.	Choose a Thread Size	Thread Lg.	Flat Dp.	Choose a Distance from Flat Edge to Pin End	Choose a Flat Wd.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	6-32, 8-32	1/2"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	8-32, 10-32	1/2"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	1/4"-20, 10-32	1/2"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	5/16"-18, 3/8"-16	1/2"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	3/8"-16, 1/2"-13	1/2"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	1/2"-13, 5/8"-11	1/2"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000

Threaded × Threaded

Threaded

Length refers to the unthreaded portion of the pin.

						Each
Dia.	Choose a Material	Choose a Lg.	Thread Size	Thread Lg.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	10-32	1/4"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	1/4"-20	7/16"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	5/16"-18	1/2"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	3/8"-16	5/8"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	1/2"-13	3/4"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	5/8"-11	7/8"	00000000	000000	00000	00000

Threaded × Set Screw Flat

Set Screw Flat

Threaded

Length refers to the unthreaded portion of the pin.

									Each
Dia.	Choose a Material	Choose a Lg.	Thread Size	Thread Lg.	Flat Dp.	Choose a Distance from Flat Edge to Pin End	Choose a Flat Wd.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	10-32	1/4"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	1/4"-20	7/16"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	5/16"-18	1/2"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	3/8"-16	5/8"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	1/2"-13	3/4"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	5/8"-11	7/8"	0.062"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000

Set Screw Flat × Set Screw Flat

Set Screw Flat

				First Pin End		Second Pin End			Each
Dia.	Choose a Material	Choose a Lg.	Flat Dp.	Choose a Distance from Flat Edge to Pin End	Choose a Flat Wd.	Choose a Distance from Flat Edge to Pin End	Choose a Flat Wd.		1-4	5-9	10-Up
1/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	0.062"	Min. of 0.25"	Min. of 1/8"	Min. of 0.25"	Min. of 1/8"	00000000	000000	000000	000000
5/16"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-4"	0.062"	Min. of 0.25"	Min. of 1/8"	Min. of 0.25"	Min. of 1/8"	00000000	00000	00000	00000
3/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	0.062"	Min. of 0.25"	Min. of 1/8"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
1/2"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	0.062"	Min. of 0.25"	Min. of 1/8"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
5/8"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	0.062"	Min. of 0.25"	Min. of 1/8"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000
3/4"	1144 Carbon Steel, 18-8 Stainless Steel, 416 Stainless Steel	1/4"-5"	0.062"	Min. of 0.25"	Min. of 1/8"	Min. of 0.25"	Min. of 1/8"	00000000	000000	00000	00000