About Torque Tools
More
Bit Assortments
These assortments contain general-purpose bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
Hex | Clutch | Tamper-Resistant Hex | ||||
Phillips | Slotted | Torx | Clutch | Square | ||
Drilled Spanner | Pozidriv® | Tamper-Resistant Torx | Torq-Set® | Tri-Wing® | External Hex |
No. of Pieces | Components Included | Bits Included | Adapters Included | Drive Tools Included | Each | |
1/4" Hex Shank Size—Steel | ||||||
---|---|---|---|---|---|---|
10 | 9 Bits 1 Adapter | Hex: 1/8", 5/32", 3/16" (1" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 3/16", 7/32", 1/4" (1" O'all Lg.) | 2 3/8" Lg. Bit Adapter for Power Tools | __ | 0000000 | 000000 |
27 | 25 Bits 1 Adapter 1 Drive Tool | Clutch: 1/8", 5/32" (1" O'all Lg.) Hex: 5/64", 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 5/32", 11/64", 7/32", 1/4", 9/32" (1" O'all Lg.) Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Torx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.) | 2 1/4" Lg. Bit Adapter for Power Tools | 7 3/4" Lg. Bit Screwdriver | 00000000 | 00000 |
29 | 26 Bits 2 Adapters 1 Drive Tool | Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—1 ea. Phillips: No. 2 (1" O'all Lg.)—2 ea. Slotted: 3/16", 1/4", 9/32" (1" O'all Lg.)—1 ea. | 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/8" Lg. Bit Adapter for Power Tools | 7 3/4" Lg. Bit Screwdriver | 00000000 | 00000 |
30 | 26 Bits 3 Adapters 1 Drive Tool | Drilled Spanner: No. 6, No. 8 No. 10 (1" O'all Lg.) Pozidriv®: No. 2 (1" O'all Lg.) Square: No. 1, No. 2 (1" O'all Lg.) Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64" T25, T27, T30, T40 (1" O'all Lg.) 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.) Tamper-Resistant Torx: T9, T10, T15, T20 Torq-Set®: No. 5, No. 8 (1" O'all Lg.) Tri-Wing®: No. 4, No. 5 (1" O'all Lg.) | 1/8" Male Square Drive × 1/8" Hex Shank Adapter 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/8" Lg. Bit Adapter for Power Tools | 8 3/4" Lg. Bit Screwdriver | 000000 | 00000 |
30 | 29 Bits 1 Adapter | External Hex: 1/4", 5/16", 3/8", 7/16" (2 5/8 O'all Lg.) - 1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (2" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—7 ea. Slotted: 13/64", 15/64", 9/32" (1" O'all Lg.)—1 ea. Slotted: 15/64" (2" O'all Lg.)—1 ea. Square: No. 1, No. 3 (1" O'all Lg.)—1 ea. Square: No. 2 (1" O'all Lg.)—5 ea. Square: No. 2 (2" O'all Lg.)—1 ea. | 2 1/4" Lg. Bit Adapter for Power Tools | __ | 00000000 | 00000 |
35 | 32 Bits 2 Adapters 1 Drive Tool | Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64" Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm (1" O'all Lg.) Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 7/32", 1/4" (1" O'all Lg.) Square: No. 1, No. 2 (1" O'all Lg.) 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.) Torx: T8, T10, T15, T20, T25, T27, T30 (1" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/4" Lg. Bit Adapter for Power Tools | 3 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver | 00000000 | 00000 |
39 | 36 Bits 2 Adapters 1 Drive Tool | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.) Phillips: No. 1, No. 2 (1" O'all Lg.) Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 1/4", 5/16" (1" O'all Lg.) Square: No. 1, No. 2, No. 3 (1" O'all Lg.) T25, T27, T30, T40 (1" O'all Lg.) Tamper-Resistant Hex: 5/64", 3/32", 7/64" 1/8", 9/64", 5/32" (1" O'all Lg.) Tamper-Resistant Torx: T8, T10, T15, T20 Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.) Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.) | 1/4" Female Square Drive × 1/4" Female Hex Adapter 2 1/4" Lg. Bit Adapter for Power Tools | Screwdriver Handle | 0000000 | 00000 |
40 | 37 Bits 2 Adapters 1 Drive Tool | Clutch: 5/32" (1" O'all Lg.)—1 ea. Hex (Inch): 5/64", 3/32", 7/64", 1/8", 9/64" 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)—1 ea. Hex (Metric): 2.5 mm, 3 mm, 4 mm 5 mm, 6 mm (1" O'all Lg.)—1 ea. Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Pozidriv®: No. 1, No. 2 (1" O'all Lg.)—1 ea. Slotted: 7/64", 5/32", 7/32" (1" O'all Lg.)—1 ea. Slotted: 9/32" (1" O'all Lg.)—2 ea. Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Torx: T10, T15, T20, T25, T27 T30, T40 (1" O'all Lg.)—1 ea. | 1 7/8" Lg. Bit Adapter for Power Tools 1/4" Male Square Drive × 1/4" Hex Shank Adapter | 7 1/2" Lg. Bit Screwdriver | 0000000 | 00000 |
51 | 50 Bits 1 Adapter | Hex: 1/8", 3/16" (1" O'all Lg.)—10 ea. Hex: 5/32" (1" O'all Lg.)—5 ea. Phillips: No. 1, No. 2 (1" O'all Lg.)—10 ea. Phillips: No. 3 (1" O'all Lg.)—5 ea. | 2 3/8" Lg. Bit Adapter for Power Tools | __ | 0000000 | 00000 |
100 | 96 Bits 4 Adapters | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 No. 12, 1/4" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64" 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32" 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15 T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27 T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea. | 1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools | __ | 000000 | 00000 |
1/4" Hex Shank Size for Power Tools—Steel | ||||||
16 | 12 Bits 4 Adapters | External Hex: 5/16" (1 5/8" O'all Lg.) Phillips: No. 1, No. 2 (6" O'all Lg.) Phillips: No. 2, No. 3 (3 1/2" O'all Lg.) Pozidriv®: No. 2 (3 1/2" O'all Lg.) Torx: T15, T20 (3 1/2" O'all Lg.) Torx: T20, T25, T27, T30 (6" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter 3/8" Male Square Drive × 1/4" Hex Shank Adapter 3" Lg. Bit Adapter for Power Tools 6" Lg. Bit Adapter for Power Tools | __ | 0000000 | 00000 |
34 | 29 Bits 5 Adapters | External Hex: 3/8", 1/2" (1 3/4" O'all Lg.) External Hex: 5/16" (1 5/8" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (2" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (3 1/2" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (6" O'all Lg.) Pozidriv®: No. 1, No. 2, No. 3 (2" O'all Lg.) Pozidriv®: No. 2 (3 1/2" O'all Lg.) Pozidriv®: No. 2 (6" O'all Lg.) Torx: T15, T20, T25, T27, T30 (6" O'all Lg.) Torx: T15, T20, T25, T30 (3 1/2" O'all Lg.) Torx: T8, T9, T10 (2" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter 3/8" Male Square Drive × 1/4" Hex Shank Adapter 1/2" Male Square Drive × 1/4" Hex Shank Adapter 2 3/8" Lg. Bit Adapter for Power Tools | __ | 0000000 | 00000 |
50 | 50 Bits | Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea. Hex (Inch): 5/32" (2" O'all Lg.)—2 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm 6 mm, 8 mm (2" O'all Lg.)—1 ea. Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea. Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16" (2" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3 No. 4 (2" O'all Lg.)—1 ea. Torx: T25 (2" O'all Lg.)—2 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27 T30, T40 (2" O'all Lg.)—1 ea. | __ | __ | 000000 | 000000 |
1/4" and 5/16" Hex Shank Size—Steel | ||||||
35 | 32 Bits 1 Extension 2 Drive Tools | Clutch 1/4" Hex Shank: 3/32", 1/8", 5/32" 3/16" (1" O'all Lg.) Hex 1/4" Hex Shank: 5/64", 3/32", 7/64", 1/8" 9/64", 7/32", 1/4" (1" O'all Lg.) Hex 5/16" Hex Shank: 5/32", 3/16" (1 1/4" O'all Lg.) Phillips 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.) Pozidriv® 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.) Slotted 1/4" Hex Shank: 3/16", 1/4", 9/32" (1" O'all Lg.) Square 1/4" Hex Shank: No. 1, No. 2, No. 3 (1" O'all Lg.) Torx 1/4" Hex Shank: T10, T15, T20, T25, T27 Torx 5/16" Hex Shank: T40, T45, T50 (1 1/4" O'all Lg.) T30 (1" O'all Lg.) | __ | 5 3/8" Lg. Angled Tight-Clearance Ratcheting Bit Screwdriver 5 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver | 00000000 | 000000 |
Bit Assortments for Impact Drivers
The toughest bits available, these withstand the shock and twisting force of impact drivers. Also known as insert bits, use with a bit adapter in power tools.
No. of Pieces | Components Included | Bits Included | Adapters Included | Bit-Holding Mechanism | Material | Container Type | Each | |
1/4" Hex Shank Size | ||||||||
---|---|---|---|---|---|---|---|---|
30 | 29 Bits 1 Adapter | Phillips: No. 1 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—3 ea. Phillips: No. 3 (1" O'all Lg.)—2 ea. Hex: 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea. Torx: T10, T15 (1" O'all Lg.)—1 ea. Torx: T20, T30, T40 (1" O'all Lg.)—2 ea. Torx: T25 (1" O'all Lg.)—3 ea. Pozidriv®: No. 2 (1" O'all Lg.)—3 ea. Pozidriv®: No. 1, No. 3 (1" O'all Lg.)—2 ea. | 1/4" Female Hex × 1/4" Male Hex for Power Tools | Magnet, Retaining Ring | Diamond-Coated Steel | Plastic Case | 0000000 | 0000000 |
Precise-Control Bit Assortments
Bits have a knurled shank that allows finger tightening. For more torque, use with the included ratcheting bit screwdriver. They will not fit in standard bit screwdrivers.
No. of Pieces | Components Included | Bits Included | Adapters Included | Extensions Included | Drive Tools Included | Material | Each | |
1/4" Knurled-End Hex | ||||||||
---|---|---|---|---|---|---|---|---|
27 | 23 Bits 1 Adapter 1 Extension 2 Drive Tools | Phillips: No. 1, No. 2 (1 3/8" O'all Lg.) Slotted: 3/16", 1/4", 3/8" (1 1/4" O'all Lg.) Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 5/32", 3/16", 7/32", 1/4" (1 1/4" O'all Lg.) Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm (1 1/4" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter | 3 1/2" Lg. Extension | 3 3/4" Lg. Tight-Clearance Ratcheting Bit Screwdriver Screwdriver Handle | Steel | 0000000 | 000000 |
Drive Size | Each | |
Slotted | ||
---|---|---|
3/16" | 0000000 | 00000 |
1/4" | 0000000 | 0000 |
3/8" | 0000000 | 0000 |
Phillips | ||
No. 1 | 0000000 | 0000 |
No. 2 | 0000000 | 0000 |
Hex | ||
0.050" | 0000000 | 0000 |
1/16" | 0000000 | 0000 |
5/64" | 0000000 | 0000 |
3/32" | 0000000 | 0000 |
7/64" | 0000000 | 0000 |
1/8" | 0000000 | 0000 |
9/64" | 0000000 | 0000 |
5/32" | 0000000 | 0000 |
3/16" | 0000000 | 0000 |
7/32" | 0000000 | 0000 |
1/4" | 0000000 | 0000 |
1.5 mm | 0000000 | 0000 |
2 mm | 0000000 | 0000 |
2.5 mm | 0000000 | 0000 |
3 mm | 0000000 | 0000 |
4 mm | 0000000 | 0000 |
5 mm | 0000000 | 0000 |
6 mm | 0000000 | 0000 |
For Bit Hex Shank Size | Overall Lg. | Material | Each | |
Knurled-End Hex | ||||
---|---|---|---|---|
1/4" | 3 3/4" | Stainless Steel | 0000000 | 00000 |
Tight-Clearance Ratcheting Bit Screwdrivers
A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.
Style E have seven interchangeable bits—all of which are compatible with power tools. Store them inside the handle so they don’t get lost or misplaced when you’re not using them. Bits are held in place by magnets. To use these screwdrivers as a nutdriver, remove the bit and turn fasteners with the shaft.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Style | For Bit Hex Shank Size | Number of Sizes | Sizes Included | Overall Lg. | Bit-Holding Mechanism | Bit | Handle | Features | Each | |
E | 1/4" | 8 | External Hex: 1/4" Phillips: No. 1, No. 2 Slotted: 1/4", 3/16" Square: No. 1, No. 2 Torx: T15 | 4 5/8" | Magnet | Steel | Plastic | Bit storage inside tool | 00000000 | 000000 |
Reversible-Bit Screwdriver/Nutdrivers
Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible.
Ultra-grip drivers have a multicomponent handle that provides comfort and the best possible grip for achieving maximum torque. For those without a voltage detector, bits turn four screw sizes and the shaft two external hex sizes. Those with a voltage detector safely test for AC voltage without contacting live wires. Light and sound indicators alert you when over 50 volts AC is detected. The detector is attached to the tool’s handle; remove it from the handle to use it on its own. Bits turn eight screw sizes and the shaft three external hex sizes.
Cushion-grip drivers offer comfort and some slip resistance. Bits turn eight screw sizes and the shaft three external hex sizes.
Shaft | Material | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bit Hex Shank Size | No. of Sizes | Sizes Included | Overall Lg. | Lg. | O'all Wd. | Bit-Holding Mechanism | Shaft | Bit | Handle | Specifications Met | Features | Each | |
Ultra Grip | |||||||||||||
1/4", 5/16" | 6 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" External Hex: 1/4", 5/16" | 7 3/4" | 2 1/4" | 7/16" | Ball Detent | Chrome-Plated Steel | Steel | Plastic | __ | Bit storage inside shaft | 0000000 | 00000 |
1/4", 5/16" | 10 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Torx: T10, T15 Square: No. 1, No. 2 External Hex: 1/4", 5/16" | 9" | 3 3/8" | 1 1/4" | Ball Detent | Plastic-Coated Steel | Steel | Plastic | C-UL Listed, UL Listed | Bit storage inside shaft, Bit storage inside tool, Voltage Detector | 0000000 | 00000 |
Cushion Grip | |||||||||||||
1/4", 5/16" | 11 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Torx: T10, T15 Square: No. 1, No. 2 External Hex: 1/4" External Hex: 5/16", 3/8" | 7" | 2 1/2" | 17/32" | Ball Detent | Chrome-Plated Steel | Steel | Plastic | __ | Bit storage inside shaft | 0000000 | 00000 |
Stubby Reversible-Bit Screwdriver/Nutdrivers
When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible and turns two external hex sizes. Drivers have a cushion grip for comfort and some slip resistance.
Shaft | Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bit Hex Shank Size | Number of Sizes | Sizes Included | Overall Lg. | Lg. | O'all Wd. | Bit-Holding Mechanism | Shaft | Bit | Handle | Features | Each | |
1/4", 5/16" | 6 | Phillips: No. 1, No. 2 Slotted: 1/4", 3/16" External Hex: 1/4", 5/16" | 3 3/8" | 1 1/4" | 17/32" | Ball Detent | Chrome-Plated Steel | Steel | Plastic | Bit storage inside shaft | 0000000 | 000000 |
Adjustable-Length Screwdriver Sets
Press down on the handle’s collar to either adjust the shaft length or remove the shaft and replace it to change the tip. Sets include a handle and multiple reversible shafts. The handle has a contoured ultra grip that provides comfort and the best possible grip for achieving maximum torque.
Additional reversible shafts are sold separately.
For technical drawings and 3-D models, click on a part number.
Number of Pieces | Components Included | Sizes Included | Overall Lg. | Material | Handle Material | Container Type | Each | |
15 | 14 Reversible Shafts 1 Screwdriver Handle | Phillips: No. 1, No. 2 Slotted: 9/64", 3/16", 7/32", 17/64" Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40 | 6 1/4"-9 1/4" | Chrome-Plated Steel | Plastic | Canvas Pouch | 000000 | 0000000 |
Drive Size | Overall Lg. | Each | |
Phillips and Slotted | |||
---|---|---|---|
1/4" × No. 2 | 6" | 0000000 | 000000 |
1/8" × No. 0 | 6" | 0000000 | 00000 |
5/32" × No. 1 | 6" | 0000000 | 00000 |
Hex | |||
1/8" × 9/64" | 6" | 0000000 | 00000 |
2 mm × 2.5 mm | 6" | 0000000 | 00000 |
3 mm × 4 mm | 6" | 0000000 | 00000 |
3/32" × 7/64" | 6" | 0000000 | 00000 |
5 mm × 6 mm | 6" | 0000000 | 00000 |
5/32" × 3/16" | 6" | 0000000 | 00000 |
Tamper-Resistant Torx | |||
T10 × T15 | 6" | 0000000 | 00000 |
T20 × T25 | 6" | 0000000 | 00000 |
T30 × T40 | 6" | 0000000 | 00000 |
T6 × T8 | 6" | 0000000 | 00000 |
T7 × T9 | 6" | 0000000 | 00000 |
Square | |||
No. 1 × No. 2 | 6" | 0000000 | 00000 |
Precise-Control Screwdriver Sets
Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Hex Screwdrivers (Inch): 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers (Metric): 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm 5 3/4" Lg. Chip Lifter | Steel | Chrome Plated | Plastic | Metal Frame | 00000000 | 0000000 |
Static-Control Precise-Control Screwdriver Sets
The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They meet IEC 61340-5-1 requirements for protecting electronic devices from electrostatic discharge. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.
Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.
Number of Pieces | Includes | Material | Handle Material | Surface Resistivity, ohms-cm. | Each | |
50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Hex Screwdrivers (Inch): 1/16", 3/32", 7/64", 1/8" Hex Screwdrivers (Metric): 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 Nutdrivers: (Metric) 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm; (Inch): 1/8", 5/32", 3/16", 1/4" 5 3/4" Lg. Chip Lifter | Chrome-Plated Steel | Plastic | 106-109 | 0000000 | 0000000 |
Tight-Clearance Screw Starters
The slim body reaches into tight spots to grip and turn screws. Use the magnet at the end of the handle to retrieve dropped fasteners. Screw starters are not intended for final tightening or removal of fasteners.
Starters with wedge tip fit a variety of drive styles. Push the sleeve on the handle forward and insert the tip into screw head. Pull the sleeve back and the tip splits to hold the screw firmly. Once threads are started, the tool releases the screw.
Drive Size | For Screw Size | Overall Lg. | Body Dia. | Material | Finish | Handle Material | Features | Each | |
Phillips, Hex, Torx, Square | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. 1, No. 2, No. 3,1/8", 5/32", 3/16", 7/32", 1/4", 3/32", 7/64", 9/64",T10, T15, T20, T27, T30,No. 1, No. 2 | 1/4", 3/8", 5/16", No. 4, No. 5, No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12 | 5 5/8" | 0.298" | Steel | Black Oxide | Aluminum | Screw Retrieval Magnet, Pocket Clip | 00000000 | 00000 |
Torque Screwdriver and Bit Sets
These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter. To adjust torque, remove the black vinyl end cap and turn the attached adjustment key. When set torque is reached, the driver slips to disengage and stop turning the fastener, preventing overtightening. Sets come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.
Note: Accuracy ratings do not apply to the lower 20% of the torque range.
Shaft | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Includes | Torque Range | Graduations | For Bit Hex Shank Size | Torque-Limiting Direction | Clockwise Accuracy | O'all Lg. | Material | Handle | Certification | Each | |
Slip-Release Torque Limiter | ||||||||||||
in.-lbs., Nm | ||||||||||||
29 | 1 Adapter 1 Drive Tool 1 Extension 1/4” Square Drive Socket Adapter 26 Bits Screwdriver Bit Extension Torque-Limiting Screwdriver | 2-36 in.-lbs. 0.2-4 Nm | 2 in.-lbs. 0.2 Nm | 1/4" | Clockwise | ±6% | 7 3/4" | Aluminum | Aluminum | Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration | 0000000 | 0000000 |
Hex, Torx, Phillips, and Slotted Bit Socket Assortments
Hex | Slotted | |
Phillips | Torx |
No. of Pieces | Includes | Overall Lg. | Material | Each | |
1/4", 3/8" Square Drive | |||||
---|---|---|---|---|---|
32 | 3/8" Hex Sockets (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1 7/8" O'all Lg.); 5/16", 3/8" (2" O'all Lg.) 3/8" Hex Sockets (Metric): 4 mm, 5 mm, 6 mm, 7 mm (1 7/8" O'all Lg.); 8 mm, 9 mm, 10 mm (2" O'all Lg.) 1/4" Torx Sockets: T10, T15, T20, T25, T27, T30 (1 7/16" O'all Lg.) 3/8" Torx Sockets: T40, T45, T47, T50 (2" O'all Lg.) 3/8" Phillips Sockets: No. 1, No. 2, No. 3 (1 7/8" O'all Lg.) 3/8" Slotted Sockets: 3/16" (1" O'all Lg.); 1/4", 5/16" (1 7/8" O'all Lg.); 3/8" (1" O'all Lg.) | 1"-2" | Chrome-Plated Steel | 0000000 | 000000 |