McMaster-Carr logo
    Filter by
    System of Measurement
    Tip Style
    Hex Shank Size
    Long Leg Length
    Attribute Image
    Power Source
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    71 Products

    Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex Shank

    Have a range of bits ready to turn the most common screw styles and sizes.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components Included
    Bits Included
    Adapters Included
    Drive Tools Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    101 Adapter
    9 Bits    		Hex: 1/8", 5/32", 3/16" (1" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 3/16", 7/32", 1/4" (1" O'all Lg.)    		2 3/8" Lg. Bit Adapter for Power Tools—SteelPlastic Case8348A17000000
    271 Adapter
    1 Drive Tool
    25 Bits    		Clutch: 1/8", 5/32" (1" O'all Lg.)
    Hex: 5/64", 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/32", 11/64", 7/32", 1/4", 9/32" (1" O'all Lg.)
    Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Torx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.)    		2 1/4" Lg. Bit Adapter for Power Tools7 3/4" Lg. Bit ScrewdriverSteelPlastic Case53365A4300000
    291 Drive Tool
    2 Adapters
    26 Bits    		Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—1 ea.
    Phillips: No. 2 (1" O'all Lg.)—2 ea.
    Slotted: 3/16", 1/4", 9/32" (1" O'all Lg.)—1 ea.    		1/4" Male Square Drive × 1/4" Hex Shank Adapter
    2 1/8" Lg. Bit Adapter for Power Tools    		7 3/4" Lg. Bit ScrewdriverSteelPlastic Case53365A32000000
    301 Adapter
    29 Bits    		External Hex: 1/4", 5/16", 3/8", 7/16" (2 5/8" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—7 ea.
    Phillips: No. 2 (2" O'all Lg.)—2 ea.
    Slotted: 13/64", 15/64", 9/32" (1" O'all Lg.)—1 ea.
    Slotted: 15/64" (2" O'all Lg.)—1 ea
    Square: No. 1, No. 3 (1" O'all Lg.)—1 ea.
    Square: No. 2 (1" O'all Lg.)—5 ea.
    Square: No. 2 (2" O'all Lg.)—1 ea.    		2 1/4" Lg. Bit Adapter for Power Tools—SteelPlastic Case52725A3400000
    351 Drive Tool
    2 Adapters
    32 Bits    		Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)
    Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 7/32", 1/4" (1" O'all Lg.)
    Square: No. 1, No. 2 (1" O'all Lg.)
    Torx: T8, T10, T15, T20, T25, T27, T30 (1" O'all Lg.)    		1/4" Male Square Drive × 1/4" Hex Shank Adapter
    2 1/4" Lg. Bit Adapter for Power Tools    		3 1/2" Lg. Tight-Clearance Ratcheting Bit ScrewdriverSteelMetal Case52725A3700000
    381 Adapter
    1 Drive Tool
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1 (1" O'all Lg.) - 1 ea.
    Phillips: No. 2 (1" O'all Lg.) - 2 ea.
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/16"
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Hex Drive Adapter3 1/2" Lg. Ratchet WrenchSteelPlastic Case5996A400000
    391 Drive Tool
    2 Adapters
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 1/4", 5/16" (1" O'all Lg.)
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Female Square Drive × 1/4" Female Hex Adapter
    2 1/4" Lg. Bit Adapter for Power Tools    		Screwdriver HandleSteelPlastic Case5996A1200000
    401 Drive Tool
    2 Adapters
    37 Bits    		Clutch: 5/32" (1" O'all Lg.)—1 ea.
    Hex (Inch): 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)—1 ea.
    Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Pozidriv®: No. 1, No. 2 (1" O'all Lg.)—1 ea.
    Slotted: 7/64", 5/32", 7/32" (1" O'all Lg.)—1 ea.
    Slotted: 9/32" (1" O'all Lg.)—2 ea.
    Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Torx: T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.    		1 7/8" Lg. Bit Adapter for Power Tools
    1/4" Male Square Drive × 1/4" Hex Shank Adapter    		7 1/2" Lg. Bit ScrewdriverSteelPlastic Case8533A8300000
    511 Adapter
    50 Bits    		Hex: 1/8", 3/16" (1" O'all Lg.)—10 ea.
    Hex: 5/32" (1" O'all Lg.)—5 ea.
    Phillips: No. 1, No. 2 (1" O'all Lg.)—10 ea.
    Phillips: No. 3 (1" O'all Lg.)—5 ea.    		2 3/8" Lg. Bit Adapter for Power Tools—SteelPlastic Case8346A7300000
    1004 Adapters
    96 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10, No. 12, 1/4" (1" O'all Lg.)—1 ea.
    Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0 (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—4 ea.
    Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Screw-In Hook Driver Bit—1 ea.
    Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea.    		1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.)
    1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.)
    2 1/2" Lg. Bit Adapter for Power Tools
    Bit Adapter for Square Drive Tools    		—SteelPlastic Case2599N100000
     
    1/4" and 5/16" Hex Shank Size
    351 Extension (2 3/8" Lg.)
    2 Drive Tools
    32 Bits    		Clutch 1/4" Hex Shank: 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.)
    Hex 1/4" Hex Shank: 5/64", 3/32", 7/64", 1/8", 9/64", 7/32", 1/4" (1" O'all Lg.)
    Hex 5/16" Hex Shank: 5/32", 3/16" (1 1/4" O'all Lg.)
    Phillips 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv® 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.)
    Slotted 1/4" Hex Shank: 3/16", 1/4", 9/32" (1" O'all Lg.)
    Square 1/4" Hex Shank: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Torx 1/4" Hex Shank: T10, T15, T20, T25, T27, T30 (1" O'all Lg.)
    Torx 5/16" Hex Shank: T40, T45, T50 (1 1/4" O'all Lg.)    		—5 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver
    5 3/8" Lg. Angled Tight-Clearance Ratcheting Bit Screwdriver    		SteelPlastic Case52815A15000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    164 Adapters
    12 Bits    		External Hex: 5/16" (1 5/8" O'all Lg.)
    Phillips: No. 1, No. 2 (6" O'all Lg.)
    Phillips: No. 2, No. 3 (3 1/2" O'all Lg.)
    Pozidriv®: No. 2 (3 1/2" O'all Lg.)
    Torx: T15, T20 (3 1/2" O'all Lg.)
    Torx: T20, T25, T27, T30 (6" O'all Lg.)    		1/4" Male Square Drive × 1/4" Hex Shank Adapter
    3" Lg. Bit Adapter for Power Tools
    3/8" Male Square Drive × 1/4" Hex Shank Adapter
    6" Lg. Bit Adapter for Power Tools    		—SteelPlastic Case5965A1600000
    345 Adapters
    29 Bits    		External Hex: 3/8", 1/2" (1 3/4" O'all Lg.)
    External Hex: 5/16" (1 5/8" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (2" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (3 1/2" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (6" O'all Lg.)
    Pozidriv®: No. 1, No. 2, No. 3 (2" O'all Lg.)
    Pozidriv®: No. 2 (3 1/2" O'all Lg.)
    Pozidriv®: No. 2 (6" O'all Lg.)
    Torx: T8, T9, T10 (2" O'all Lg.)
    Torx: T15, T20, T25, T27, T30 (6" O'all Lg.)
    Torx: T15, T20, T25, T30 (3 1/2" O'all Lg.)    		1/2" Male Square Drive × 1/4" Hex Shank Adapter
    1/4" Male Square Drive × 1/4" Hex Shank Adapter
    2 3/8" Lg. Bit Adapter for Power Tools
    3/8" Male Square Drive × 1/4" Hex Shank Adapter
    6" Lg. Bit Adapter for Power Tools    		—SteelPlastic Case5965A1300000
    5050 BitsHex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea.
    Hex (Inch): 5/32" (2" O'all Lg.)—2 ea.
    Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (2" O'all Lg.)—1 ea.
    Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea.
    Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16" (2" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27, T30, T40 (2" O'all Lg.)—1 ea.
    Torx: T25 (2" O'all Lg.)—2 ea.    		——SteelPlastic Case2599N2000000
     

    Precise-Control Screwdriver Sets

    Make fine-tuned adjustments on a variety of small, delicate components, such as electronics, miniature models, and microscopes. These screwdriver sets give you better control than a standard screwdriver to avoid stripping tiny screws or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
    No. of
    Pieces
    Includes
    Grip
    Style
    Material
    Container
    Type
    Each
    Phillips, Slotted, Hex, and Torx
    505 3/4" Lg. Chip Lifter
    Hex Screwdrivers: 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"
    Hex Screwdrivers: 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm
    Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm
    Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1
    Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32"
    Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10    		PlainChrome-Plated SteelMetal Stand52985A940000000
     

    Tight-Clearance Screw Starters

    The slim body reaches into tight spots to grip and turn screws. Use the magnet at the end of the handle to retrieve dropped fasteners. Screw starters are not intended for final tightening or removal of fasteners.
    Wedge Tip
    Image of Product. Front orientation. Contains Inset. Screw Starters. Tight-Clearance Screw Starters, Wedge Tip, For Phillips, Hex, Torx, and Square Drives.
    Image of Attribute. Hex. Front orientation. Contains Annotated. For Hex Drives.

    For Phillips, Hex, Torx, and

    Square Drives

    Hex

    Image of Specification. Torx. Front orientation. For Torx Drives.

    Torx

    Image of Specification. Square. Front orientation. For Square Drives.

    Square

    Starters with wedge tip fit a variety of drive styles. Push the sleeve on the handle forward and insert the tip into screw head. Pull the sleeve back and the tip splits to hold the screw firmly. Once threads are started, the tool releases the screw.
    Drive Size
    For Screw Size
    Overall
    Lg.
    Body
    Dia.
    Material
    Handle
    Material
    Features
    Each
    For Phillips, Hex, Torx, and Square Drives
    No. 1, No. 2, No. 3, 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", T10, T15, T20, T27, T30, No. 1, No. 2No. 4, No. 5, No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12, 1/4", 5/16", 3/8"5 5/8"0.298"Black-Oxide SteelAluminum
    		Screw Retrieval Magnet, Pocket Clip74265A8800000
     

    Impact Drivers

    Image of Product. Front orientation. Impact Drivers. Impact Drivers.
    Image of Specification. Hex. Front orientation. For Hex Drives.

    Hex

    Image of Specification. Phillips. Front orientation. For Phillips Drives.

    Phillips

    Image of Specification. Slotted. Front orientation. For Slotted Drives.

    Slotted

    Break stuck screws free using screwdriver bits. Strike the end of the handle with a hammer to turn the bit and tighten or loosen fasteners. Use these tools as an impact wrench without the bit adapter.
    No. of
    Sizes
    Sizes Included
    Drive Size
    Drive Direction
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Bit
    Material
    For Drive Style
    Each
    3/8" Square Drive
    16Hex: 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm
    Phillips: No. 1, No. 2, No. 3, No. 4
    Slotted: 1/4", 5/16", 3/8", 1/2"    		1/4", 5/16", 3/8", 1/2", 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, No. 1, No. 2, No. 3, No. 4Clockwise and Counterclockwise5/16"6 1/4"SteelSteelHex, Phillips, Slotted
    		6967A13000000
     

    Static-Control Precise-Control Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Static-Control Precise-Control Screwdriver Sets.
    Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, these meet IEC requirements to drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
    Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
    No. of
    Pieces
    Includes
    Grip
    Style
    Material
    Static Control
    Rating
    Surface Resistivity
    Specs. Met
    Container
    Type
    Each
    Phillips, Slotted, Hex, and Torx
    505 3/4" Lg. Chip Lifter
    Hex Screwdrivers: 1/16", 3/32", 7/64", 1/8"
    Hex Screwdrivers: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm
    Nutdrivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 1/8", 5/32", 3/16", 1/4"
    Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1
    Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157"
    Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20    		PlainChrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-1Metal Stand7440A950000000
     

    Tight-Clearance Ratcheting Bit Screwdrivers

    Image of Product. Front orientation. Screwdrivers. Tight-Clearance Ratcheting Bit Screwdrivers, Bit Screwdrivers with Bit Storage in Handle.

    Bit Screwdrivers with

    Bit Storage in Handle

    Slip these compact screwdrivers between obstructions to spin screws in seconds. The ratcheting handle rotates with smooth, continuous motion, so you never have to lift and reposition your tool. Attach one of the included bits to the shaft to drive a variety of screws.
    Value—We tested tools from dozens of manufacturers to offer near-premium quality at a fraction of the cost.
    Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
    Shaft
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Each
    Bit Screwdrivers with Bit Storage in Handle
     
    Value
    8External Hex: 1/4"
    Phillips: No. 1, No. 2
    Slotted: 1/4", 3/16"
    Square: No. 1, No. 2
    Torx: T15    		1/4"Stubby4 5/8"1 1/2"3/8"Chrome-Plated SteelMagnet52725A41000000
     

    Screwdriver/Nutdrivers

    Image of Product. Front orientation. Screwdrivers. Screwdriver/Nutdrivers, 6 Sizes.
    Image of Product. Front orientation. Screwdrivers. Screwdriver/Nutdrivers, 10 Sizes.

    6 Sizes

    10 Sizes

    Image of Product. Front orientation. Screwdrivers. Screwdriver/Nutdrivers, 11 Sizes.

    11 Sizes

    Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible.
    Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
    Value—We tested tools from dozens of manufacturers to offer near-premium quality at a fraction of the cost.
    Voltage Detector—Those with a voltage detector safely test for AC voltage without contacting live wires. Light and sound indicators alert you when over 50 volts AC is detected. The detector is attached to the tool’s handle; remove it from the handle to use it on its own. Bits turn eight screw sizes and the shaft two external hex sizes.
    Shaft
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Features
    Mfr.
    Each
    Premium
    11External Hex: 1/4"
    External Hex: 5/16", 3/8"
    Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Square: No. 1, No. 2
    Torx: T10, T15    		1/4", 5/16"Standard7"2 1/2"17/32"SteelBall Detent—Klein Tools6127A41000000
     
    Value
    6External Hex: 1/4", 5/16"
    Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"    		1/4", 5/16"Standard7 3/4"2 1/4"7/16"SteelBall Detent——6127A380000
    10External Hex: 1/4", 5/16"
    Phillips: No. 1, No. 2, No. 3
    Slotted: 3/16", 1/4", 9/32"
    Torx: T15, T20    		1/4", 5/16"Standard7 1/4"3 1/2"3/8"SteelBall Detent——5493A4500000
    10External Hex: 1/4", 5/16"
    Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Square: No. 1, No. 2
    Torx: T10, T15    		1/4", 5/16"Standard9"3 3/8"1 1/4"SteelBall DetentVoltage Detector—6127A1300000
     

    Torque Screwdriver and Bit Sets

    Image of Product. Front orientation. Torque Screwdrivers. Torque Screwdriver and Bit Sets .
    Image of Attribute. Front orientation. Torque Screwdriver and Bit Sets .

    These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter. To adjust torque, remove the black vinyl end cap and turn the attached adjustment key. When set torque is reached, the driver slips to disengage and stop turning the fastener, preventing overtightening. Sets come with a calibration certificate that states the product has passed a test for accuracy.
    Note: Accuracy ratings do not apply to the lower 20% of the torque range.
    Material
    No. of
    Pieces
    Components Included
    Adapters Included
    Extensions Included
    Drive Tools Included
    Torque Range
    Graduations
    For Bit Hex
    Shank Size
    Torque-Limiting
    Direction
    Clockwise
    Accuracy
    Overall
    Lg.
    Shaft
    Handle
    Certificate Type
    Each
    Slip-Release Torque Limiter
     
    in·lbf, N-m
    291 Adapter
    1 Drive Tool
    1 Extension
    26 Bits    		1/4" Square Drive Socket AdapterScrewdriver Bit ExtensionTorque-Limiting Screwdriver2 in·lbf to 36 in·lbf
    0.2 N-m to 4 N-m    		2 in·lbf
    0.2 N-m    		1/4"Clockwise±6%7 3/4"AluminumAluminum
    		Calibration Certificate Traceable to NIST5716A520000000
     

    Maintenance Bit Socket Sets

    Image of Product. Front orientation. Bit Sockets. Maintenance Bit Socket Sets.
    Image of Specification. Front orientation. For Hex Drives.
    Image of Specification. Front orientation. For Phillips Drives.

    For

    Hex

    Drives

    For

    Phillips

    Drives

    Image of Specification. Front orientation. For Slotted Drives.
    Image of Specification. Front orientation. For Torx Drives.

    For

    Slotted

    Drives

    For

    Torx

    Drives

    Image of Specification. Front orientation. For Pozidriv® Drives.
    Image of Specification. Front orientation. For Tamper-Resistant Torx Drives.

    For

    Pozidriv®

    Drives

    For

    Tamper-Resistant

    Torx Drives

    Keep a convenient variety of drive styles and sizes of bit sockets on hand. For use with hand-drive tools only.
    No. of
    Pieces
    Sockets Included
    Material (Socket Style)
    Container
    Type
    For Drive Style
    Each
    1/4", 3/8" Square Drive
    323/8" Hex Bit Sockets (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1 7/8" O'all Lg.); 5/16", 3/8" (2" O'all Lg.)
    3/8" Hex Bit Sockets (Metric): 4 mm, 5 mm, 6 mm, 7 mm (1 7/8" O'all Lg.); 8 mm, 9 mm, 10 mm (2" O'all Lg.)
    1/4" Torx Bit Sockets: T10, T15, T20, T25, T27, T30 (1 7/16" O'all Lg.)
    3/8" Phillips Bit Sockets: No. 1, No. 2, No. 3 (1 7/8" O'all Lg.)
    3/8" Slotted Bit Sockets: 3/16" (1" O'all Lg.); 1/4", 5/16" (1 7/8" O'all Lg.); 3/8" (1" O'all Lg.)
    3/8" Torx Bit Sockets: T40, T45, T47, T50 (2" O'all Lg.)    		Chrome-Plated Steel (Bit Sockets)Plastic CaseHex, Phillips, Slotted, Torx5534A22000000
     
    3/8" Square Drive
    373/8" Hex Bit Sockets (Inch): 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (2" O'all Lg.)
    3/8" Hex Bit Sockets (Metric): 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 10 mm (2" O'all Lg.)
    3/8" Torx Bit Sockets: T20, T27, T30, T40, T45, T50, T55 (2" O'all Lg.)
    3/8" Tamper-Resistant Torx Bit Sockets: T15, T20, T25, T27, T30, T40, T45, T50, T55 (2" O'all Lg.)
    3/8" Phillips Bit Sockets: No. 1, No. 2, No. 3 (2" O'all Lg.)
    3/8" Slotted Bit Sockets: 4 mm, 5 mm, 6 mm (2" O'all Lg.)
    3/8" Pozidriv Bit Sockets: No. 2 (2" O'all Lg.)    		Chrome-Plated Steel (Bit Sockets)Foam TrayHex, Phillips, Pozidriv®, Slotted, Tamper-Resistant Torx, Torx93111A12000000
     

    Bit Sets For Impact Drivers

    Image of Product. Front orientation. Screwdriver Bits. Bit Sets For Impact Drivers.
    Tougher than your average bits, the ones in these sets have a thin, flexible section on the shank that absorbs 30 times the impact force. They are heat treated for hardness and manufactured to tight tolerances, so they won't snap or slip under high stress.
    Hex Shank—Use a bit adapter (not included) to attach these bits to power tools.
    Wear-Resistant Diamond-Coated Steel—Diamond particles embedded in the tip bite into the screw head for a strong grip. Our most wear-resistant bits, these maintain their grip and shape, even when driving screws into tough materials.
    No. of
    Pieces
    Components
    Included
    Bits Included
    Adapters Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    301 Adapter
    29 Bits    		Hex: 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 1 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—3 ea.
    Phillips: No. 3 (1" O'all Lg.)—2 ea.
    Pozidriv®: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Pozidriv®: No. 2 (1" O'all Lg.)—3 ea.
    Torx: T10, T15 (1" O'all Lg.)—1 ea.
    Torx: T20, T30, T40 (1" O'all Lg.)—2 ea.
    Torx: T25 (1" O'all Lg.)—3 ea.    		1/4" Female Hex × 1/4" Male Hex for Power ToolsDiamond-Coated SteelPlastic Case2779N110000000
     

    Changeable-Shaft Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Changeable-Shaft Screwdriver Sets, Screwdrivers in Canvas Roll-Up Pouch.

    Screwdrivers in Canvas

    Roll-Up Pouch

    Say goodbye to bulky screwdriver sets. Just swap out the shaft to fasten a variety of screws with a single tool. These screwdrivers free up space in your toolkit and are easy to carry wherever the job takes you.
    Screwdrivers with an adjustable handle let you modify the shaft's length. Press down on the handle’s collar to slide the shaft in or out.
    Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
    No. of
    Sizes
    Sizes Included
    Components Included
    Relative
    Lg.
    Overall Lg.
    Material
    Mfr.
    Each
    Screwdrivers in Canvas Roll-Up Pouch
     
    Premium
    28Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm
    Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
    Phillips: No. 1, No. 2
    Slotted: 9/64", 3/16", 7/32", 17/64"
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40    		1 Adjustable Screwdriver Handle
    14 Reversible Shafts    		Standard6 1/4" to 9 1/4"Chrome-Plated SteelWiha2257A60000000
     
    Reversible Shafts
    Drive Size
    Overall
    Lg.
    Material
    Each
    Hex
    3/32" × 7/64"6"Chrome-Plated Steel2257A3400000
    1/8" × 9/64"6"Chrome-Plated Steel2257A350000
    5/32" × 3/16"6"Chrome-Plated Steel2257A330000
    2 mm × 2.5 mm6"Chrome-Plated Steel2257A270000
    3 mm × 4 mm6"Chrome-Plated Steel2257A290000
    5 mm × 6 mm6"Chrome-Plated Steel2257A320000
     
    Slotted and Phillips
    1/8" × No. 06"Chrome-Plated Steel2257A2500000
    5/32" × No. 16"Chrome-Plated Steel2257A2200000
    1/4" × No. 26"Chrome-Plated Steel2257A2100000
     
    Square
    No. 1 × No. 26"Chrome-Plated Steel2257A3600000
     
    Tamper-Resistant Torx
    T6 × T86"Chrome-Plated Steel2257A2600000
    T7 × T96"Chrome-Plated Steel2257A2800000
    T10 × T156"Chrome-Plated Steel2257A2300000
    T20 × T256"Chrome-Plated Steel2257A2400000
    T30 × T406"Chrome-Plated Steel2257A3100000
     

    Precise-Control Bit Sets

    Image of Product. Front orientation. Screwdriver Bits. Precise-Control Bit Sets.
    Make fine-tuned adjustments on a variety of small screws in electronics, miniature models, and microscopes. These bits have a knurled shank to twist with just your fingertips for pin-point precision. Use them to avoid stripping tiny screws or cracking fragile materials.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Screwdriver Bits
    Replacement
    Screwdrivers
    No. of
    Pieces
    Components Included
    Bits Included
    Adapters Included
    Drive Tools Included
    Material
    Container
    Type
    Each
    Each
    For Hand Tools
     
    1/4" Knurled-End-Hex Shank Size
    271 Adapter
    1 Extension (3 1/2" Lg.)
    2 Drive Tools
    23 Bits    		Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1 1/4" O'all Lg.)
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1 1/4" O'all Lg.)
    Phillips: No. 1, No. 2 (1 3/8" O'all Lg.)
    Slotted: 3/16", 1/4", 3/8" (1 1/4" O'all Lg.)    		1/4" Male Square Drive × 1/4" Hex Shank Adapter3 3/4" Lg. Tight-Clearance Ratcheting Bit Screwdriver
    Screwdriver Handle    		SteelPlastic Case5399A160000005697A12000000
     
    Replacement Precise-Control Screwdriver Bits
    Drive
    Size
    Material
    Each
    Slotted
    3/16"Steel5697A7600000
    1/4"Steel5697A220000
    3/8"Steel5697A360000
     
    Phillips
    No. 1Steel5697A240000
    No. 2Steel5697A250000
     
    Hex
    0.050"Steel5697A310000
    1/16"Steel5697A320000
    5/64"Steel5697A130000
    3/32"Steel5697A140000
    7/64"Steel5697A750000
    1/8"Steel5697A150000
    9/64"Steel5697A330000
    5/32"Steel5697A160000
    3/16"Steel5697A170000
    7/32"Steel5697A180000
    1/4"Steel5697A190000
    1.5 mmSteel5697A510000
    2 mmSteel5697A520000
    2.5 mmSteel5697A530000
    3 mmSteel5697A540000
    4 mmSteel5697A550000
    5 mmSteel5697A560000
    6 mmSteel5697A770000
     

    Stubby Screwdriver/Nutdrivers

    Image of Product. Front orientation. Screwdrivers. Stubby Screwdriver/Nutdrivers.
    When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible and turns two external hex sizes. Drivers have a cushion grip for comfort and some slip resistance.
    Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
    Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
    Shaft
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Mfr.
    Each
    Premium
    6External Hex: 1/4", 5/16"
    Phillips: No. 1, No. 2
    Slotted: 1/4", 3/16"    		1/4", 5/16"Stubby3 3/8"1 1/4"17/32"SteelBall DetentKlein Tools6127A42000000
     

    Fold-Up L-Key Sets

    Image of Product. Front orientation. L-Keys. Fold-Up L-Key Sets, Plain Grip with 3/16" Diameter Awl.

    Plain Grip with

    3/16" Diameter Awl

    Multiple L-keys fold up in the handle for easy carrying, similar to a Swiss army knife. Slip these sets in your pocket and never worry about misplacing individual keys. The handle gives you leverage to tighten with minimal effort.
    3/16" Diameter Awl—Create a precise pilot hole for your fastener.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Handle
    No. of
    Sizes
    Drive Size
    Max. Fold-Out
    Angle
    Material
    Lg.
    Material
    Color
    Each
    Plain Grip with 3/16" Diameter Awl
     
    Phillips, Slotted, and Torx
    5No. 1 1/8", 3/16", 1/4" T15180°Black-Oxide Alloy Steel3 5/8"SteelSilver5820A17000000
     

    L-Keys

    Image of Product. Front orientation. L-Keys. L-Keys.
    The highest quality L-keys you can buy for tightening and loosening screws. Our L-keys are precision manufactured to tight tolerances for an exact fit.
    Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.
    Long—The most common option, these L-keys have a balanced length for everyday reach and torque.
    Length
    Drive
    Size
    Overall
    Relative
    Long
    Leg
    Short
    Leg
    Finish
    Each
    Alloy Steel
     
    Square
    No. 15 7/16"Long5 1/4"1 1/8"Black Phosphate Coated9311N1300000
     
    back to top