EN 14399 Hex Head Screws

Filter by

System of Measurement

Thread Size

Length

Threading

Fastener Strength Grade/Class

Grip Length

Fastener Head Type

Finish

Hot-Dipped Galvanized

Thread Pitch

Head Width

Material

Specifications Met

Head Height

Thread Length

Thread Type

Tensile Strength

100,000 psi or greater

Thread Fit

Thread Spacing

Drive Style

Hex Head Profile

Performance

DFARS Specialty Metals

Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

Compliant

RoHS

Compliant

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

156 Products

About Hex Head Screws and Bolts

Choose a hex head fastener with the right threading, thread size, material, and strength for your equipment.

Steel Heavy Hex Head Structural Screws

Partially

Threaded

Secure structural joints, such as mating I-beams, columns, and joists. With a head that's about 10% wider than standard hex head screws, these handle heavier loads by distributing them over a larger area. The head also has six flat sides to keep wrenches and sockets from slipping and rounding off the drive.

Length is measured from under the head.

High-Strength Fastener—Commonly used to fasten components in valves, pumps, motors, and other high-stress applications. These screws have a tensile strength of 125,000 to 160,000 psi.

Hot-Dipped Galvanized Steel—The strength of steel with the rust resistance of stainless steel. These screws are an economical alternative to 18-8 stainless steel in wet and outdoor environments, but they won't hold up to salt water and chemicals. The galvanized finish is thicker than other types of coatings, so the threads may be more likely to stick during installation. You can only mate these screws with hot-dipped galvanized nuts.

Grip Length—Screws with a grip length have a precisely measured unthreaded section under the head, called a grip. It's stronger than the threaded section, so you can place it in joints exposed to sideways forces.

			Head, mm
	Lg., mm	Grip Lg., mm	Wd.	Ht.	Threading	Thread Spacing	Fastener Strength Grade/Class	Tensile Strength, psi	Specs. Met		Each
High-Strength Steel







				M12 × 1.75 mm

				30	7	22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A411	00000


				35	12	22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A412	0000
				40	17	22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A413	0000
				45	22	22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A414	0000
				50	27	22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A415	0000
				60	37	22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A416	0000
				70	47	22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A417	0000




						M16 × 2 mm

						40	12	27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A418	0000


						45	17	27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A419	0000
						50	22	27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A421	0000
						55	27	27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A422	0000
						60	32	27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A423	0000
						65	37	27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A424	0000
						70	42	27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A425	0000
						80	52	27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A426	0000
						90	62	27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A427	0000
						100	72	27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A428	0000




								M20 × 2.5 mm

								40	7	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A429	0000


								45	12	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A431	0000
								50	17	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A432	00000
								55	22	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A433	0000
								60	27	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A434	00000
								65	32	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A435	00000
								70	37	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A436	00000
								75	42	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A437	00000
								80	47	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A438	00000
								85	52	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A439	00000
								90	57	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A441	00000


								95	62	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A442	00000
								100	67	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A443	00000
								110	77	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A444	00000
								120	87	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A445	00000
								140	107	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A446	00000
								150	117	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A447	00000
								160	127	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A448	00000




								M22 × 2.5 mm

		60	26					36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A449	00000


		70	36					36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A451	00000
		80	46					36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A452	00000
		90	56					36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A453	00000
		100	66					36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A454	00000
		120	86					36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A455	00000




								M24 × 3 mm

				70				31	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A456	00000


				80	41			41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A458	00000
				90	51			41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A459	00000
				100	61			41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A461	00000
				110	71			41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A462	00000
				120	81			41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A463	00000
				130	91			41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A464	00000
				140	101			41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A465	00000
				150	111			41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A466	00000
				160	121			41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A467	00000




								M30 × 3.5 mm

						100		56	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A481	00000


						110	66	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A482	00000
						120	76	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A468	00000
						130	86	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A469	00000
						140	96	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A471	00000
						150	106	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A472	00000
						160	116	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A473	00000
						180	136	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A474	00000
						200	156	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A475	00000
						220	176	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A476	00000
						240	196	50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A477	00000


						High-Strength Hot-Dipped Galvanized Steel







										M12 × 1.75 mm

										30	7	22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A101	0000


35										12	22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A102	0000
40	17									22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A103	0000
45	22									22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A104	0000
50	27									22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A105	0000
55	32									22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A106	0000
60	37									22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A107	0000
65	42									22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A108	0000
70	47									22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A109	0000
80	57									22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A111	0000
90	67									22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A112	0000


100	77									22	7.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A113	0000




		M16 × 2 mm

		40	12							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A114	0000


		45	17							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A115	0000
		50	22							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A116	0000
		55	27							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A117	0000
		60	32							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A118	0000
		65	37							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A119	0000
		70	42							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A121	0000
		75	47							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A122	0000
		80	52							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A123	0000
		90	62							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A124	0000
		100	72							27	10	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A125	00000


		110	82	27	10					Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A126	00000
		120	92	27	10					Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A127	00000
		130	102	27	10					Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A128	00000
		140	112	27	10					Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A129	00000
		150	122	27	10					Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A131	00000
		160	132	27	10					Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A132	00000




				M20 × 2.5 mm

				50	17					32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A133	00000


				55	22					32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A134	00000
				60	27					32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A135	00000
				65	32					32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A136	00000
				70	37					32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A137	00000
				75	42					32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A138	00000
				80	47	32				12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A139	00000
				90	57	32	12.5			Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A141	00000
				100	67	32	12.5			Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A142	00000
				110	77	32	12.5			Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A143	00000
				120	87	32	12.5			Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A144	00000


				130	97	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A145	00000
				140	107	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A146	00000
				150	117	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A147	00000
				160	127	32	12.5	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A148	00000




						M22 × 2.5 mm

						60	26	36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A149	00000


						65	31	36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A151	00000
						70	36	36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A152	00000
						75	41	36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A153	00000
						80	46	36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A154	00000
						90	56	36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A155	00000
100						66	36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A156	00000
110	76					36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A157	00000
120	86					36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A158	00000
130	96					36	14	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A159	00000




						M24 × 3 mm

						60	21	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A161	00000


						65	26	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A162	00000
						70	31	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A163	00000
						75	36	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A164	00000
						80	41	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A165	00000
						90	51	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A166	00000
						100	61	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A167	00000
						110	71	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A168	00000
						120	81	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A169	00000
						130	91	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A171	00000
						140	101	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A172	00000


						150	111	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A173	00000
						160	121	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A174	00000
		180				141	41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A175	00000
		200	161			41	15	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A176	00000




						M27 × 3 mm

						70	29	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A177	00000


						75	34	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A178	00000
						80	39	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A179	00000
						90	49	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A181	00000
						100	59	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A182	00000
						110	69	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A183	00000
						120	79	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A184	00000
						130	89	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A185	00000
						140	99	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A186	00000
						150	109	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A187	00000
						160	119	46	17	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A188	00000




				M30 × 3.5 mm

				75	31			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A189	00000


				80	36			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A191	00000
				90	46			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A192	00000
				100	56			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A193	00000
				110	66			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A194	00000
				120	76			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A195	00000
				130	86			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A196	00000
				140	96			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A197	00000
				150	106			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A198	00000
				160	116			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A199	00000
				180	136			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A201	00000


				200	156			50	18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A202	00000
220				176	50			18.7	Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A478	00000
240	196			50	18.7			Partially Threaded	Coarse	Class 10.9	150,000	DIN 6914 EN 14399 ISO 7412	97478A479	000000