McMaster-Carr logo
    Filter by
    Mixing Required
    Inverted Dispensing
    DFARS Specialty Metals
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    62 Products

    High-Strength Spray Contact Adhesives

    Image of Product. Front orientation. Contact Adhesives. High-Strength Spray Contact Adhesives.
    Form bonds with twice the strength of our other spray contact adhesives. Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to adhere.
    Cannot Be Sold to California—Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Temp.,
    ° F
    Each
    Mfr. Model
    No.
    Container
    Net Wt., oz.
    Approx. Coverage @
    Application Density
    Inverted
    Dispensing
    Begins to
    Harden, sec.
    Reaches Full
    Strength, hr.
    Shear Strength,
    psi
    Min.
    Max.
    Color
    For Joining
    Cannot Be
    Sold To
    1-11
    12-Up
    3M
    9012.2319 ft² @ 2.5 g/ft²No60246000250ClearCeramic, Composite, Glass, Metal, Plastic, RubberCalifornia7610A39000000000000
    9017.627 ft² @ 2.5 g/ft²Yes60246000250ClearCeramic, Composite, Glass, Metal, Plastic, RubberCalifornia7610A2560000000000
    90CA1929 ft² @ 2.5 g/ft²No60246000250ClearCeramic, Composite, Glass, Metal, Plastic, Rubber—7610A330000000000
     

    Self-Spacing Acrylic Structural Adhesives

    Image of Product. Cartridge. Front orientation. Cartridge.

    Cartridge

    Filled with uniform glass beads, these acrylics stop surfaces from pressing too close together as you join them. The even spacing prevents adhesives from squeezing out during bonding and ensures a consistent thickness when they harden.
    Acrylics bond with the widest range of materials of any adhesive. They adhere to plastic especially well, requiring little surface preparation.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Material Certificate Icon
    Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Each
    3M
     
    Scotch-Weld
    DP8805NS1.52Cartridge5243,9002510:1Thick Liquid45,000-20 to 280Composite, Metal, Plastic, Rubber7467A88000000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.52 fl. oz. 3M Cartridges7467A1300000
    Dispensing Gun for 1.64 fl. oz. Cartridges7467A41000000
    Replacement Plunger for 1.52 fl. oz. 3M Cartridges7467A7900000

    Mixer Nozzles for Two-Part Adhesive Cartridges

    Image of Product. Front orientation. Adhesive Dispensing Gun Nozzles. Mixer Nozzles for Two-Part Adhesive Cartridges.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Tapered Tip. Mixer Nozzles for Two-Part Adhesive Cartridges.
    Image of Specification. Front orientation. Contains Border. 4-Step Tip. Mixer Nozzles for Two-Part Adhesive Cartridges.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. 5-Step Tip. Mixer Nozzles for Two-Part Adhesive Cartridges.

    Tapered Tip

    4-Step Tip

    5-Step Tip

    To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge. Mixing elements help combine the two parts of an adhesive as it flows through the nozzle. A short nozzle with many mixing elements combines adhesive while minimizing the adhesive left in the nozzle after dispensing. Choose a nozzle that matches the connection type, size, and mix ratio of your adhesive cartridge.
    Bell-Mount Fitting Connection
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Bell-Mount Fitting Connection. Mixer Nozzles for Two-Part Adhesive Cartridges.

    Bell-Mount

    Fitting

    Connection

    5-Step Tip—A step tip allows you to trim the opening to the diameter you need.
    For Cartridge
    Size, fl. oz.
    Mix
    Ratio
    Opening ID
    Lg.
    No. of Mixing
    Elements
    Mfr.
    Material
    Each
    5-Step Tip
    6.76, 13.51:1, 2:10.07" to 0.21"7.3"203MPolypropylene
    		7467A9300000
    6.76, 13.51:1, 2:10.66"5"203MPolypropylene
    		7467A7130000
     
    Twist Lock Fitting Connection
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Twist Lock Fitting Connection. Mixer Nozzles for Two-Part Adhesive Cartridges.

    Twist Lock

    Fitting

    Connection

    Tapered Tip—A tapered tip has a small opening for controlled dispensing.
    4-Step Tip—A step tip allows you to trim the opening to the diameter you need.
    For Cartridge
    Size, fl. oz.
    Mix Ratio
    Opening ID
    Lg.
    No. of Mixing
    Elements
    Mfr.
    Material
    Each
    Tapered Tip
    1.5210:10.08"3.6"163MPolypropylene
    		7467A1300000
    1.64, 1.691:1, 2:1, 2:30.08"3.6"163MPolypropylene
    		7467A730000
     
    4-Step Tip
    1.64, 1.691:1, 2:10.04" to 0.193"5.8"203MPolypropylene
    		7467A120000
     

    Epoxy Structural Adhesives

    Image of Product. Can. Front orientation. Can.
    Image of Product. Cartridge. Front orientation. Cartridge.

    Can

    Cartridge

    Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    Specifications Met
    For Joining
    Each
    3M
     
    Scotch-Weld
    DP1901.64Cartridge6014 day850201:1Thick Liquid8,000-65 to 350—Masonry, Metal, Plastic, Rubber7467A72000000
    DP1906.76Cartridge6014 day850201:1Thick Liquid8,000-65 to 350—Masonry, Metal, Plastic, Rubber7467A122000000
    DP1101.64Cartridge848 hr.1,500201:1Thick Liquid50,000-65 to 350—Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber7467A2200000
    DP1101.64Cartridge848 hr.2,500201:1Thick Liquid65,000-65 to 350—Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber7467A2300000
    DP1106.76Cartridge848 hr.2,500201:1Thick Liquid65,000-65 to 350—Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber7467A96000000
    DP1251.64Cartridge157 day1,900351:1Thick Liquid55,000-65 to 300—Metal, Plastic, Rubber7467A6500000
    DP1251.64Cartridge207 day1,500351:1Thick Liquid16,250-65 to 300—Metal, Plastic, Rubber7467A6800000
    183857.6Can607 day2,00044:5Paste492,500-65 to 350ASTM E595, MIL-A-52194Composite, Glass, Metal, Plastic, Rubber, Wood75065A71000000
    1838L64Can607 day2,00041:1Thick Liquid11,000-65 to 350—Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood75065A74000000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip)7467A1200000
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip)7467A730000
    Mixer Nozzle for 6.76 fl. oz. 3M Cartridges7467A930000
    Dispensing Gun for 1.64 fl. oz. Cartridges7467A41000000
    Dispensing Gun for 6.76 fl. oz. 3M Cartridges7467A91000000
    Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges7467A15000000
    Replacement Plunger for 1.64 fl. oz. 3M Cartridges7467A4800000

    Adhesive Accelerators for Instant-Bond Adhesives

    Image of Product. Front orientation. Adhesive Accelerators. Adhesive Accelerators for Instant-Bond Adhesives, Spray Bottle, Applicator-Top Bottle.

    Applicator-Top

    Bottle, Spray

    Bottle

    Shorten the time it takes instant-bond adhesives to reach full strength. Apply these accelerators before bonding with instant-bond adhesives for strength, or after bonding to keep adhesive from turning cloudy.
    Model Number 87937—Scotch-Weld Model Number 87937 also works as a primer on porous materials. Bottles include both a brush and spray head for easy dispensing.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Consistency
    Viscosity,
    cP
    Color
    Each
    3M Scotch-Weld
    879372Applicator-Top Bottle, Spray BottleThin Liquid10Amber75445A83000000
     

    3M Two-Part Adhesive Dispensing Guns

    Image of Product. For 1.18, 1.25, 1.52, 1.59, 1.64, and 1.69 fl. oz. Cartridge Sizes. Front orientation. Adhesive Dispensing Guns. 3M Two-Part Adhesive Dispensing Guns, For 1.69 fl. oz. Cartridge Size, For 1.52 fl. oz. Cartridge Size, For 1.64 fl. oz. Cartridge Size.
    Image of Product. Front orientation. Adhesive Dispensing Guns. 3M Two-Part Adhesive Dispensing Guns, For 6.76 fl. oz. Cartridge Size.
    Image of Product. For 6.76, 8.45, and 13.5 fl. oz. Cartridge Sizes. Front orientation. Adhesive Dispensing Guns. 3M Two-Part Adhesive Dispensing Guns, For 13.5 fl. oz. Cartridge Size, For 6.76 fl. oz. Cartridge Size.

    For 1.18, 1.25, 1.52,

    1.59, 1.64, and 1.69 fl.

    oz. Cartridge Sizes

    For 6.76 fl. oz. Cartridge Size

    For 6.76, 8.45, and 13.5 fl.

    oz. Cartridge Sizes

    Use these guns to dispense two-part adhesives. Use them only with 3M dual cartridges.
    For 6.76 fl. oz. Cartridge Size and For 13.5 fl. oz. Cartridge Size—The gun for 6.76 fl. oz. and 13.5 fl. oz. cartridges is suitable for high-volume applications.
    For Cartridge Size, fl. oz.
    Includes
    Each
    1.18, 1.25, 1.52, 1.59, 1.64, 1.691:1 and 2:1 Mix Ratio Plungers, 10:1 Mix Ratio Plunger7467A410000000
    6.761:1 and 2:1 Mix Ratio Plungers7467A91000000
    6.76, 8.45, 13.51:1, 2:1, and 10:1 Mix Ratio Plungers7467A763000000
     

    3M Plungers for Two-Part Adhesive Dispensing Gun Cartridges

    Image of Product. Front orientation. Adhesive Dispensing Gun Cartridge Plungers. 3M Plungers for Two-Part Adhesive Dispensing Gun Cartridges.
    Use these plungers with a 3M dispensing gun for adhesives in dual cartridges.
    For Cartridge
    Size, fl. oz.
    Mix
    Ratio
    Material
    Each
    1.5210:1Glass-Filled Nylon7467A79000000
    1.64, 1.691:1, 2:1Glass-Filled Nylon7467A4800000

    Impact-Resistant Epoxy Structural Adhesives

    Image of Product. Cartridge. Front orientation. Cartridge.

    Cartridge

    Mixed with rubber for resilient bonds that withstand sudden stress, shock, and vibration better than standard epoxies. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Each
    3M
     
    Scotch-Weld
    DP4051.69Cartridge37 day2,260402:1Thick Liquid9,500-65 to 350Metal, Plastic, Rubber7467A211000000
    DP4201.69Cartridge2024 hr.280502:1Thick Liquid30,000-65 to 350Composite, Metal, Plastic7467A2500000
    DP4201.69Cartridge2024 hr.400502:1Thick Liquid30,000-65 to 350Composite, Metal, Plastic7467A5100000
    DP4206.76Cartridge2024 hr.280502:1Thick Liquid30,000-65 to 350Composite, Metal, Plastic7467A99000000
    DP4206.76Cartridge2024 hr.400502:1Thick Liquid30,000-65 to 350Composite, Metal, Plastic7467A411000000
    DP42013.5Cartridge2024 hr.280502:1Thick Liquid30,000-65 to 350Composite, Metal, Plastic7467A413000000
    DP42013.5Cartridge2024 hr.400502:1Thick Liquid30,000-65 to 350Composite, Metal, Plastic7467A412000000
    DP420NS1.69Cartridge2024 hr.470502:1Paste180,000-65 to 350Composite, Metal, Plastic7467A21600000
    DP420NS6.76Cartridge2024 hr.470502:1Paste180,000-65 to 350Composite, Metal, Plastic7467A414000000
    DP420NS13.5Cartridge2024 hr.470502:1Paste180,000-65 to 350Composite, Metal, Plastic7467A415000000
    DP4601.69Cartridge6024 hr.2,500602:1Thick Liquid30,000-65 to 350Composite, Metal, Plastic7467A2600000
    DP4606.76Cartridge6024 hr.2,500602:1Thick Liquid30,000-65 to 350Composite, Metal, Plastic7467A85000000
    DP46013.5Cartridge6024 hr.2,500602:1Thick Liquid30,000-65 to 350Composite, Metal, Plastic7467A416000000
    DP460NS1.69Cartridge6024 hr.2,680602:1Paste125,000-65 to 350Composite, Metal, Plastic7467A6600000
    DP460NS6.76Cartridge6024 hr.2,680602:1Paste125,000-65 to 350Composite, Metal, Plastic7467A417000000
    DP460NS13.5Cartridge6024 hr.2,680602:1Paste125,000-65 to 350Composite, Metal, Plastic7467A67000000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip)7467A1200000
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip)7467A730000
    Mixer Nozzle for 6.76 fl. oz. 3M Cartridges7467A930000
    Dispensing Gun for 1.64 fl. oz. Cartridges7467A41000000
    Dispensing Gun for 6.76 fl. oz. 3M Cartridges7467A91000000
    Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges7467A15000000
    Replacement Plunger for 1.64 fl. oz. 3M Cartridges7467A4800000

    Slow-Set Epoxy Structural Adhesives

    Image of Product. Can. Front orientation. Can.
    Image of Product. Cartridge. Front orientation. Cartridge.
    Image of Product. Tube. Front orientation. Tube.

    Can

    Cartridge

    Tube

    Take your time positioning parts—these epoxies remain adjustable for at least 90 minutes before setting. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size
    Type
    Begins to
    Harden
    Reaches Full
    Strength, day
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    Specifications Met
    For Joining
    Each
    3M
     
    Scotch-Weld
    22163.3 fl. oz.Tube90 min.71,700252:3Thick Liquid81,000-65 to 350ASTM E595, DOD-A-82720Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood75045A65000000
    22164 fl. oz.Tube2 hr.303,000251:1Thick Liquid10,000-65 to 350ASTM E595Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood75045A7800000
    221626.6 fl. oz.Can90 min.71,700252:3Thick Liquid81,000-65 to 350ASTM E595, DOD-A-82720Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood75045A66000000
    221653.3 fl. oz.Can90 min.71,700252:3Thick Liquid81,000-65 to 350ASTM E595, DOD-A-82720Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood75045A67000000
    221664 fl. oz.Can2 hr.303,000251:1Thick Liquid10,000-65 to 350ASTM E595Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood75045A8000000
    22161.66 gal.Can90 min.71,700252:3Thick Liquid81,000-65 to 350ASTM E595, DOD-A-82720Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood75045A6800000000
    DP1901.64 fl. oz.Cartridge90 min.71,400201:1Thick Liquid86,250-65 to 350—Masonry, Metal, Plastic, Rubber7467A2400000
    DP1906.76 fl. oz.Cartridge90 min.71,400201:1Thick Liquid86,250-65 to 350—Masonry, Metal, Plastic, Rubber7467A97000000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip)7467A1200000
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip)7467A730000
    Mixer Nozzle for 6.76 fl. oz. 3M Cartridges7467A930000
    Dispensing Gun for 1.64 fl. oz. Cartridges7467A41000000
    Dispensing Gun for 6.76 fl. oz. 3M Cartridges7467A91000000
    Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges7467A15000000
    Replacement Plunger for 1.64 fl. oz. 3M Cartridges7467A4800000

    Epoxy Potting Compounds

    Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
    3M Potting Compounds—Extra Hard
    Image of System. Front orientation. Contains Annotated. Potting Compounds. Epoxy Potting Compounds.
    Image of Product. Front orientation. Potting Compounds. Epoxy Potting Compounds.
    Model Number DP460EG—3M DP460EG also require a plunger to dispense.
    Dry
    Time
    Mfr. Model
    No.
    Container
    Size, fl. oz.
    Consistency
    Touch
    Overall
    Dielectric Strength,
    V/mil
    Thermal Conductivity,
    W/(m⋅°C)
    Temp. Range,
    ° F
    Flammability
    Rating
    For Use On
    Choose a
    Color
    Each
    DP2701.64Thick Liquid3 hr.48 hr.8500.18-65 to 210UL 94 HB
    		Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, GlassBlack, Clear7467A274000000
    DP2706.8Thick Liquid3 hr.48 hr.8500.18-65 to 210UL 94 HB
    		Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, GlassBlack, Clear7467A31100000
    DP27013.5Thick Liquid3 hr.48 hr.8500.18-65 to 210UL 94 HB
    		Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, GlassBlack7467A712000000
    DP460EG1.69Thick Liquid110 min.7 day510Not Rated0 to 175—Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, PlasticOff-White7467A21700000
    Accessories for Potting Compounds
    Guns
    For Cartridge Size, fl. oz.
    Includes
    Each
    1.18, 1.25, 1.52, 1.59, 1.64, 1.691:1 and 2:1 Mix Ratio Plungers, 10:1 Mix Ratio Plunger7467A410000000
    6.761:1 and 2:1 Mix Ratio Plungers7467A91000000
    6.76, 8.45, 13.51:1, 2:1, and 10:1 Mix Ratio Plungers7467A763000000
    Nozzles
    For Cartridge
    Size, fl. oz.
    No. of Mixing
    Elements
    Each
    1.64, 1.69167467A7300000
    1.64, 1.69207467A120000
    1.64, 1.69207467A5160000
    6.76, 13.5207467A930000
    6.76, 13.5207467A7130000
    Cartridge Plungers
    For Cartridge
    Size, fl. oz.
    For Mfr.
    Model No.
    Mix
    Ratio
    Each
    1.64, 1.69DP460EG1:1, 2:17467A48000000

    Air-Powered 3M Two-Part Adhesive Dispensing Guns

    Image of Product. Front orientation. Adhesive Dispensing Guns. Air-Powered 3M Two-Part Adhesive Dispensing Guns.
    Dispense two-part adhesives with compressed air. Use these guns only with 3M dual cartridges.
    1:1/2:1 mix ratio plungers sold separately.
    Air Inlet
    For Cartridge Size, fl. oz.
    Operating Air
    Pressure, psi
    Pipe
    Size
    Thread
    Type
    Gender
    Air Hose
    Included
    Each
    Air Powered
    1.25, 1.59, 1.64, 1.69501/4
    		NPT
    		MaleNo7467A150000000
     

    Flame-Retardant Epoxy Structural Adhesives

    Image of Product. Cartridge. Front orientation. Cartridge.

    Cartridge

    Rated UL 94 for flame retardance, these epoxies self-extinguish within 10 seconds. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Material Certificate Icon
    Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    Flammability
    Rating
    For Joining
    Each
    3M
     
    Scotch-Weld
    DP100FR1.64Cartridge5481,10021:1Thick Liquid73,750-65 to 300UL 94 V-0
    		Metal, Plastic, Rubber7467A28000000
     
    Accessories and Replacements for Structural Adhesives
    Each
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip)7467A1200000
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip)7467A730000
    Dispensing Gun for 1.64 fl. oz. Cartridges7467A41000000
    Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges7467A15000000
    Replacement Plunger for 1.64 fl. oz. 3M Cartridges7467A4800000

    Optically Clear Epoxy Structural Adhesives

    Image of Product. Cartridge. Front orientation. Cartridge.

    Cartridge

    For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    Flammability
    Rating
    For Joining
    Each
    3M
     
    Scotch-Weld
    DP100 Plus1.64Cartridge3481,700131:1Thick Liquid8,750-65 to 300UL 94 HB
    		Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber7467A55000000
    DP1051.64Cartridge4481,300351:1Thick Liquid7,500-65 to 300—Metal, Plastic, Rubber, Metal to Plastic, Metal to Rubber, Plastic to Rubber7467A5800000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip)7467A1200000
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip)7467A730000
    Dispensing Gun for 1.64 fl. oz. Cartridges7467A41000000
    Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges7467A15000000
    Replacement Plunger for 1.64 fl. oz. 3M Cartridges7467A4800000

    Structural Adhesive Removers

    Image of Product. Aerosol Can. Front orientation. Adhesive Removers. Structural Adhesive Removers, Aerosol Can.

    Aerosol

    Can

    Cut through the strongest of structural adhesives before they fully cure. These removers clean unwanted drips or spills from epoxy and urethane-based adhesives such as Gorilla Glue. They can damage paint, coatings, and finishes, so use them with care.
    Cannot Be Sold to Canada—Removers cannot be sold to Canada due to local chemical regulations.
    Material Certificate Icon
    Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Type
    Size
    Form
    For
    Removing
    For Adhesive Material
    For Use On
    Solution
    Type
    Primary
    Chemical
    Primary Chemical
    Concentration
    Harshness
    Mfr. Model
    No.
    Cannot Be
    Sold To
    Each
     
    3M
    Aerosol Can15 oz.LiquidAdhesiveEpoxy, Polyurethane Rubber, Silicone, Urethane RubberAluminum, Brass, Bronze, Ceramic, Chrome, Copper, Fiberglass, Galvanized Steel, Glass, Iron, Porcelain, Stainless Steel, SteelSolvent BasedAcetone15% to 40%Harsh38987Canada9553N11000000
    Can32 fl. oz.LiquidAdhesiveEpoxy, Polyurethane Rubber, Silicone, Urethane RubberAluminum, Brass, Bronze, Ceramic, Chrome, Copper, Fiberglass, Galvanized Steel, Glass, Iron, Porcelain, Stainless Steel, SteelSolvent BasedAcetone15% to 40%Harsh38984Canada9553N1200000
     

    Quick-Set Epoxy Structural Adhesives

    Image of Product. Cartridge. Front orientation. Cartridge.

    Cartridge

    For quick repairs, these epoxies begin to harden in six minutes or less. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
    Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    Flammability
    Rating
    For Joining
    Each
    3M
     
    Scotch-Weld
    DP1001.64Cartridge54875021:1Thick Liquid12,000-65 to 320UL 94 HB
    		Metal, Plastic, Rubber7467A21000000
    DP1006.76Cartridge54875021:1Thick Liquid12,000-65 to 320UL 94 HB
    		Metal, Plastic, Rubber7467A9500000
    DP100NS1.64Cartridge54884021:1Paste93,750-65 to 320—Metal, Plastic, Rubber7467A1600000
     
    Accessories for Structural Adhesives
    Each
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip)7467A1200000
    Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip)7467A730000
    Mixer Nozzle for 6.76 fl. oz. 3M Cartridges7467A930000
    Dispensing Gun for 1.64 fl. oz. Cartridges7467A41000000
    Dispensing Gun for 6.76 fl. oz. 3M Cartridges7467A91000000
    Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges7467A15000000
    Replacement Plunger for 1.64 fl. oz. 3M Cartridges7467A4800000
    back to top