These vests meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 and ANSI/ISEA 107 standards for high visibility. They are rated ANSI Class 2 for working on or near roadways. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These vests are mesh acrylic and are self-extinguishing. They are stitched with Nomex thread for added durability. They have hook and loop closures down the front and one waist pocket.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these vests.

Bright colors and reflective stripes make workers stand out in high-risk areas and where low-visibility is a concern. Black fabric on the lower half keeps jackets looking cleaner longer than all-yellow jackets. These jackets meet Class 3 ANSI/ISEA 107 standards for workers that need to be seen by traffic at a minimum distance of 1/4 of a mile. They have a zipper down the front.

Polyester provides the comfort of a moisture-wicking sweatshirt with the warmth of a jacket.

Polyurethane-coated polyester is water resistant to keep you dry in wet and rainy environments. These jackets have a storm flap to keep rain out, as well as a removable fleece liner for added warmth and comfort. The outer shell has an inside pocket to protect contents from the elements. A compartment in the collar allows you to roll up and conceal the hood.

Bright colors and reflective stripes make workers stand out in high-risk areas and where low-visibility is a concern. These pants meet ANSI/ISEA 107 Class E standards for high-visibility clothing—wear with a Class 2 or Class 3 garment to meet Class 3 visibility requirements (visibility by traffic at a minimum distance of 1/4 of a mile). Made of polyester fabric, these pants are lightweight and moisture wicking to keep you cool. They have an elastic waist, hip slits, and snaps on the cuffs.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these pants.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These overalls meet ANSI/ISEA 107 Class E standards for high-visibility clothing—wear with a Class 2 or Class 3 vest, shirt, or jacket to meet Class 3 visibility requirements (visibility by traffic at a minimum distance of 1/4 of a mile). They are polyamide-coated polyester to keep you dry in wet and rainy conditions. They have snaps on the cuffs, adjustable suspenders to modify the length, and a hook and loop chest pocket.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These jackets meet ANSI/ISEA 107 Class 3 standards for workers in high-risk areas that need to be seen by traffic at a minimum distance of 1/4 of a mile. They are polyester to keep you dry in wet and rainy conditions. These jackets have a zipper down the front with a storm flap to keep rain out. They have hook and loop closures on the cuffs to modify the fit and two waist pockets.

Women’s jackets have a contoured fit. Fold them into their own hood or lower front pocket and zip them closed to pack them away. They have an adjustable elastic hem—cinch the toggle piece to tighten it and keep out rain at the bottom. To cool off while remaining dry, unzip the underarm vents.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Bright colors and reflective stripes make it easy to spot workers in low-visibility areas. These jackets protect against flames and welding sparks. They snap closed and have one inside pocket.

These jackets are also treated to protect against low radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Safeguard hands from cold objects as well as cold weather. These gloves are pigskin leather with a fluorescent orange nylon back and reflective tape on the knuckles that makes them easy to spot.

Use gloves with knit cuffs for a secure fit. Gloves with open cuffs are more convenient to put on and take off than other gloves.

These flexible gloves combine abrasion resistance with a design that conforms to your hand for improved dexterity. They all have a reflective backing that makes them easy to spot.

The coating on these gloves provides extra grip and protection without limiting dexterity. They provide light abrasion resistance and have a fluorescent yellow back side that makes them easy to spot.

A leather palm provides abrasion resistance. These gloves have fluorescent stripes and reflective tape on the cuff and knuckles that makes them easy to spot. They are lightweight and breathable.

These gloves conform to your hand for improved dexterity. They safeguard hands from cold objects as well as cold weather. They are insulated and windproof. Guards on the back of the gloves protect your hands from impact when working in confined spaces. They have a fluorescent backing that makes them easy to spot. All of these gloves meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Synthetic leather gloves are waterproof. They meet ANSI/ISEA 138, which measures a glove's ability to dissipate impact force on the knuckles and fingers.

Polyurethane-coated spandex gloves are thin and lightweight. They are textured for improved grip.

Use gloves with knit cuffs for a comfortable yet secure fit. Hook and loop cuffs can be adjusted for a custom fit.

These gloves conform to your hand for improved dexterity. Often used on machine assembly jobs where protection against oil and cuts is essential, these gloves are thin enough for precision work. They resist tearing and degradation from oil and grease. Bumpers on the back of the gloves protect your hands from impact when working in confined spaces. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Guards on the knuckles and foam padding on the palm protect your hands from impact. These abrasion-resistant gloves conform to your hand for improved dexterity. Their reflective backing makes them easy to spot.

These Type I hard hats protect against blows from falling objects to the top of the head only.

Class E hard hats are proof-tested at 20,000 volts. Class C have not been tested for electrical protection.

Hard hats with a three-point chin strap stay securely on your head. They’re often worn at heights and in windy conditions, and during active movement such as climbing, working sideways, and working upside down. These hard hats have a foam shell that absorbs impact to reduce force on the neck and head.

Hard hats with ventilation holes have slots that increase air circulation to keep you cool.

Hard hats with reversible suspension can be worn backward without removing and reinstalling the suspension—just swing it to the opposite side.

Hard hats with a rain-trough brim have a rear gutter that channels water away from your neck.

Hard hats with a full brim have a wide front-to-back brim that provides added protection against sun, glare, splash, and rain.

Hard hats with mounting slots attach to face shields and earmuffs (not included).

Hard hats come with four-, six-, or eight-point suspensions—the more suspension points, the better the hard hat distributes the force of impact. Pinlock suspensions adjust with interlocking straps. Ratchet suspensions adjust with an easy-turn knob.

For protection from more than just falling objects, these hard hats are rated ANSI/ISEA Z89.1, Type II to deflect both top and off-center blows to the head. They’re also classified as Class E, which means they are tested at 20,000 volts for electrical insulation. To prevent perspiration from getting into your eyes, all have a sweatband. Use the mounting slots to attach face shields and earmuffs (not included).

Hard hats come with four- or eight-point suspensions—the more suspension points, the better the hard hat distributes the force of impact. For comfort and a secure fit, adjust the ratchet suspensions with an easy-to-turn knob.

Hard hats with a three-point chin strap are more secure than hard hats with a two-point chin strap. They’re good for active movement such as climbing, working sideways, and working upside down.

Protect your head from minor bumps and scrapes. All have a pinlock suspension that adjusts with interlocking straps.