We will reply to your message within an hour.
More
These hinges are made of metal.
Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.
Thick leaves and a large diameter pin make these hinges good for use with heavy doors.
Turn a set screw to adjust the door 1/8" up or down after it's hung.
The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.
Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames.
A grease fitting makes these hinges easy to lubricate.
Springs in these hinges without holes automatically swing doors and gates closed behind you.
After a light push on the door, springs in these hinges swing doors and gates fully open.
A keeper holds the pin in a retracted position to make reconnecting doors easier than other pull-release quick-disconnect hinges.
These hinges without holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.
Squeeze the hinge handles together to retract the pin and disconnect a door; release the handles and the pin snaps back.
Create precise outlines for hinge mortises (cutouts). Position the cutter on a wood door or frame and hit it with a hammer to imprint the outline.
With leaf heights under 1/4", these tiny hinges are the smallest we offer.
Choose these hinges for their adherence to strict military standards for material and construction.
Made of carbon fiber, these hinges are as strong as aluminum yet lighter in weight. All have leaves that are connected by a strip of flexible Kevlar instead of a pin.
No need for drilling holes or welding, slip these hinges onto panel and door edges for a secure fit.
When the door is closed, the distance between the leaves is larger than the pin diameter, creating an offset to accommodate a gasket or trim.
The leaves of these hinges almost touch when the door is closed. They are often used in electrical enclosures for a tight seal.
Push a button to adjust the hinge angle and release it to lock the position.
Thread or weld the unfinished shank of these rod ends to meet your specific linkage needs.
Good for general purpose applications where corrosion and high strength aren’t a concern, these rod end bolts are made of carbon steel.
These alloy steel bolts have the highest tensile strength of any blank rod end bolt we offer.
Made of stainless steel, these rod end bolts are more corrosion resistant than steel rod end bolts.
Slide these shims behind your door’s hinge to align it in the jamb.