Filter by
Material
Width
Door Frame Coverage
Mounting Location
Rod End Type
Opening/Closing Action
Shank Thread Length
Door Mounting Location
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Shank Center Length
Bulldog Document Clips
 |
 |
Document Clips with Magnet |
Concealed Cabinet Hinges
 |  |
170° Range of Motion |
The most widely used cabinet hinges are commonly found in workstations, breakrooms, and storage areas. Mount the door leaf in a round cutout (mortise) and the frame leaf to the cabinet wall. You can adjust them three ways to perfectly align doors. Also known as cup hinges and European hinges.
Hold Closed—Spring tension pulls the door closed when it’s open less than 10°, and then keeps it closed without a catch or latch.
Nickel-Plated Steel—These hinges combine rust resistance with an attractive appearance.
For Overlay Door—For doors that cover their frame entirely.
For Half-Overlay Door—For doors that cover half of their frame.
Door Leaf | Frame Leaf | For Overlay Door | For Half-Overlay Door | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Cutout Dp. | Range of Motion | Ht. | Wd. | Ht. | Wd. | Overall Wd. | Wt. Cap., lb. | Features | Mounting Fasteners Included | Appearance | Each | Each | ||||
Open/Close Freely | ||||||||||||||||
Nickel-Plated Steel | ||||||||||||||||
| 7/16" | 100° | 2 1/4" | 1 1/2" | 2 1/4" | 2 15/16" | 4 11/32" | 15 | Quick-Release Clip | Yes | Dull | 1100A1 | 00000 | 1100A2 | 00000 | ||
| 7/16" | 170° | 2 1/4" | 1 7/8" | 2 1/4" | 4 5/8" | 5 25/64" | 15 | Quick-Release Clip | Yes | Dull | 1100A5 | 00000 | 1100A6 | 00000 | ||
| 1/2" | 110° | 2 1/4" | 1 7/16" | 2 1/4" | 3 1/16" | 4 15/32" | 15 | Quick-Release Clip | Yes | Dull | ——— | 0 | 1100A4 | 0000 | ||
Hold Closed | ||||||||||||||||
Nickel-Plated Steel | ||||||||||||||||
| 7/16" | 100° | 2 1/4" | 1 1/2" | 2 1/4" | 2 7/8" | 4 11/32" | 15 | Quick-Release Clip | Yes | Dull | 1100A7 | 0000 | 1100A11 | 0000 | ||
| 7/16" | 170° | 2 1/4" | 1 7/8" | 2 1/4" | 3 5/16" | 5 25/64" | 15 | Quick-Release Clip | Yes | Dull | 1100A9 | 00000 | 1100A13 | 00000 | ||
| 1/2" | 120° | 2 1/4" | 1 7/16" | 2 1/4" | 3" | 4 1/2" | 15 | Quick-Release Clip | Yes | Dull | 1100A8 | 0000 | 1100A12 | 0000 | ||
Swivel Document Clips
Flexible Plastic (ENT and MPT) Conduit Support Clips
 |
Hold flexible plastic conduit in place along walls and machines.
Nylon—Lightweight and chemical resistant, these fittings won't corrode.
Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Conduit OD | For Conduit Type | Ht. | Wd. | Color | Temp., ° F | Fasteners Included | No. of | Dia. | Each | |||
Nylon | ||||||||||||
| 0.39" | ENT, MPT | 0.85" | 0.67" | Black | -40 to 220 | No | 1 | 0.18" | 3185K129 | 00000 | ||
| 0.51" | ENT, MPT | 0.96" | 0.81" | Black | -40 to 220 | No | 1 | 0.22" | 3185K131 | 0000 | ||
| 0.62" | ENT, MPT | 1.06" | 0.94" | Black | -40 to 220 | No | 1 | 0.22" | 3185K78 | 0000 | ||
| 0.84" | ENT, MPT | 1.34" | 1.18" | Black | -40 to 220 | No | 1 | 0.26" | 3185K79 | 0000 | ||
| 1.12" | ENT, MPT | 1.65" | 1.52" | Black | -40 to 220 | No | 1 | 0.26" | 3185K81 | 0000 | ||
| 1.36" | ENT, MPT | 1.89" | 1.79" | Black | -40 to 220 | No | 1 | 0.26" | 3185K82 | 00000 | ||
| 1.67" | ENT, MPT | 2.2" | 2.19" | Black | -40 to 220 | No | 1 | 0.26" | 3185K88 | 00000 | ||
| 2.15" | ENT, MPT | 2.68" | 2.66" | Black | -40 to 220 | No | 1 | 0.26" | 3185K132 | 00000 | ||
Quick-Install Ball Joint Linkages
 |
A spring-loaded sleeve allows for rapid assembly and disassembly. The stud is machined to fit perfectly inside its housing and swivel in all directions—good for light mechanical components and controls.
Ball Joint Linkages
 |
Clip |
Clip—Ball joint linkages with a clip are for lighter loads than ball joint linkages with a spring.
Shank | Ball Stud | Right-Hand Threaded Ball Stud | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Ctr. Lg. | Thread Lg. | Thread Size | Ctr. Lg. | Lg. | Max. Ball Swivel | Static Radial Load Cap. | Material | Lubrication | Each | |||
Right-Hand Shank Thread | |||||||||||||
Clip | |||||||||||||
| 10-32 | 7/8" | 1/2" | 10-32 | 7/8" | 7/16" | 40° | Not Rated | Zinc-Plated Carbon Steel | Required | 2695K88 | 00000 | ||
Document Clips
 |
Smooth Jaw |
Hold lightweight objects, secure covers, and seal bags in sanitary and corrosive environments. Made of 430 stainless steel, these clips resist sprays from nearby washdowns and show up on metal detectors and X-rays, which helps you prevent contaminated products from leaving your plant. To open them, squeeze their handles; otherwise, their springs keep them closed.
Smooth Jaw—Clips with a smooth jaw create a uniform seal along the length of the jaw. They’re often used to seal open-top bags.
Pegboard Bulldog Clips
 |
Hold instructions, safety sheets, and small bags with these clips.
Stainless Steel Clips
 |
Serrated Jaw |
Hold lightweight objects, secure covers, and seal bags in sanitary and corrosive environments. Made of 430 stainless steel, these clips resist sprays from nearby washdowns and show up on metal detectors and X-rays, which helps you prevent contaminated products from leaving your plant. To open them, squeeze their handles; otherwise, their springs keep them closed.
Serrated Jaw—Clips with serrated jaws grip items more securely than clips with smooth jaws.
Easy-Adjust Clevis Rod Ends
 |  |  |
Clevis Rod End |
Make quick adjustments to these rod ends by inserting and releasing the clevis pins without the need to bend them into place. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies. All are zinc-plated steel for moderate corrosion resistance.
Shank | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Ctr. Lg. | Thread Lg. | ID | Jaw Opening Wd. | Overall Wd. | Jaw Ctr. Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Each | |||
Zinc-Plated Carbon Steel | |||||||||||||
| 3/4"-10 | 3 1/8" | 1 9/16" | 3/4" | 3/4" | 1 9/16" | 1 9/16" | 60,000 | Clevis Pin, Two Safety Clips | Right Hand | 2447K32 | 000000 | ||
| 3/4"-16 | 3 1/8" | 1 9/16" | 3/4" | 3/4" | 1 9/16" | 1 9/16" | 60,000 | Clevis Pin, Two Safety Clips | Right Hand | 2447K24 | 00000 | ||
| 1"-12 | 3 15/16" | 1 31/32" | 1" | 1" | 1 15/16" | 1 31/32" | 60,000 | Clevis Pin, Two Safety Clips | Right Hand | 2447K25 | 00000 | ||
Chemical-Resistant Clevis Rod Ends
 |  |  |
In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
Shank | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Ctr. Lg. | Thread Lg. | ID | Jaw Opening Wd. | Overall Wd. | Jaw Ctr. Lg. | Tensile Strength, psi | Temp. Range, ° F | Includes | Shank Thread Direction | Specs. Met | Each | |||
Nylon | |||||||||||||||
| 10-32 | 25/32" | 5/16" | 3/16" | 3/16" | 13/32" | 13/32" | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K11 | 00000 | ||
| 1/4"-28 | 15/16" | 11/32" | 1/4" | 1/4" | 15/32" | 15/32" | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K12 | 0000 | ||
| 5/16"-24 | 1 1/4" | 15/32" | 5/16" | 5/16" | 5/8" | 5/8" | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K13 | 00000 | ||
| 3/8"-24 | 1 9/16" | 19/32" | 3/8" | 13/32" | 25/32" | 25/32" | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K14 | 00000 | ||
| 7/16"-20 | 1 29/32" | 23/32" | 7/16" | 15/32" | 15/16" | 15/16" | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K15 | 00000 | ||
| 1/2"-20 | 2 7/32" | 7/8" | 1/2" | 9/16" | 1 1/16" | 1 1/8" | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K16 | 00000 | ||
| M5 × 0.8 mm | 24 mm | 9 mm | 5 mm | 6 mm | 12 mm | 12 mm | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K71 | 00000 | ||
| M6 × 1 mm | 24 mm | 9 mm | 6 mm | 6 mm | 12 mm | 12 mm | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K72 | 00000 | ||
| M8 × 1.25 mm | 32 mm | 12 mm | 8 mm | 8 mm | 16 mm | 16 mm | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K73 | 00000 | ||
| M10 × 1.5 mm | 40 mm | 15 mm | 10 mm | 10 mm | 20 mm | 20 mm | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K74 | 00000 | ||
| M12 × 1.75 mm | 48 mm | 18 mm | 12 mm | 12 mm | 24 mm | 24 mm | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K75 | 00000 | ||
| M16 × 2 mm | 64 mm | 24 mm | 16 mm | 16 mm | 32 mm | 32 mm | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K76 | 00000 | ||
| M20 × 1.5 mm | 80 mm | 30 mm | 20 mm | 20 mm | 40 mm | 40 mm | 34,000 | -20 to 175 | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 2449K77 | 00000 | ||
