Hinge Screws

Filter by

Screw Size

Length

Tip Type

Flat Head Profile

Finish

Material

For Use In

Tapping Method

Head Diameter

Tapping Screw Type

Threading

Drive Size

Approximate Threads per Inch

Head Height

Drill Bit Decimal Size Equivalent

Drill Bit Size

REACH

DFARS Specialty Metals

RoHS

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Performance

290 Products

About Tapping Screws

Compare drilling, pointed, thread-forming, and thread-cutting tips to find the best choice for your material.

Tapping Method

Thread Forming

Displace material to form threads

286 products

Thread Cutting

Remove material to cut threads

4 products

Performance

Self-Piercing

Start a hole in sheet metal up to 0.050" thick

286 products

Corrosion Resistant

Won't rust in wet and outdoor environments

175 products

Steel Phillips Flat Head Screws for Sheet Metal

Fasten trim, brackets, and other objects with countersunk holes to sheet metal. The head of these screws is flat on top and beveled underneath to sit flush with surfaces. They have a pointed tip that starts a hole in sheets up to 0.025" thick, but for thicker material you’ll need to drill first. The Phillips drive handles enough torque to keep drivers from slipping.

Length is measured from the top of the head.

Black-Oxide Steel—Typically chosen for their appearance, these screws have a dark, matte coating for a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Head
	Lg.	Dia.	Ht.	Tapping Screw Type	Drive Size	Approx. Threads per In.	Countersink Angle	Flat Head Profile	Drill Bit Size	Pkg. Qty.		Pkg.
Black-Oxide Steel







				No. 4 Screw Size

				3/8"	0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	100	000000000	00000


				1/2"	0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	100	000000000	0000
				5/8"	0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	100	000000000	0000
				3/4"	0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	100	000000000	0000




						No. 6 Screw Size

						1/2"	0.262"	0.083"	AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000


						5/8"	0.262"	0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
						3/4"	0.262"	0.083"	AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
						1"	0.262"	0.083"	AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
						1 1/4"	0.262"	0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	00000
						1 1/2"	0.262"	0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	00000




								No. 8 Screw Size

								3/8"	0.312"	0.07"	A, AB	No. 2	15	82°	Undercut	29 Ga.	100	000000000	00000


								1/2"	0.262"	0.083"	AB	No. 2	15	82°	Standard	29 Ga.	100	000000000	00000
								1/2"	0.312"	0.1"	AB	No. 2	15	82°	Standard	29 Ga.	100	000000000	0000
								5/8"	0.312"	0.1"	A, AB	No. 2	15	82°	Standard	29 Ga.	100	000000000	00000
								3/4"	0.312"	0.1"	AB	No. 2	15	82°	Standard	29 Ga.	100	000000000	0000
								1"	0.262"	0.083"	AB	No. 2	15	82°	Standard	29 Ga.	100	000000000	00000
								1"	0.312"	0.1"	AB	No. 2	15	82°	Standard	29 Ga.	100	000000000	00000
								1 1/4"	0.312"	0.1"	AB	No. 2	15	82°	Standard	29 Ga.	100	000000000	00000
								1 1/2"	0.262"	0.083"	AB	No. 2	15	82°	Standard	29 Ga.	100	000000000	00000
								1 1/2"	0.312"	0.1"	AB	No. 2	15	82°	Standard	29 Ga.	100	000000000	00000
								2"	0.312"	0.1"	A, AB	No. 2	15	82°	Standard	29 Ga.	50	000000000	00000


								2 1/2"	0.312"	0.1"	A, AB	No. 2	15	82°	Standard	29 Ga.	25	000000000	00000




										No. 10 Screw Size

										1/2"	0.362"	0.081"	AB	No. 2	12	82°	Undercut	21 Ga.	100	000000000	00000


										3/4"	0.362"	0.116"	AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	00000
										1"	0.362"	0.116"	AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	00000
										1 1/4"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	50	000000000	00000
										1 1/2"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	50	000000000	00000
2"										0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	25	000000000	00000
2 1/2"	0.362"									0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	25	000000000	00000
3"	0.362"									0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	25	000000000	00000




		No. 12 Screw Size

		3/4"	0.412"							0.132"	AB	No. 3	14	82°	Standard	3/16"	50	000000000	00000


		1"	0.412"							0.132"	AB	No. 3	14	82°	Standard	3/16"	50	000000000	00000
		1 1/4"	0.412"							0.132"	AB	No. 3	14	82°	Standard	3/16"	50	000000000	00000
		1 1/2"	0.412"							0.132"	AB	No. 3	14	82°	Standard	3/16"	25	000000000	00000


		Zinc-Plated Steel







										No. 0 Screw Size

										1/4"	0.112"	0.035"	AB	No. 0	52	82°	Standard	55 Ga.	10	000000000	0000


										3/8"	0.112"	0.035"	AB	No. 0	52	82°	Standard	55 Ga.	10	000000000	0000
										1/2"	0.112"	0.035"	AB	No. 0	52	82°	Standard	55 Ga.	10	000000000	0000




										No. 1 Screw Size

										1/4"	0.137"	0.043"	AB	No. 0	48	82°	Standard	52 Ga.	10	000000000	0000


										3/8"	0.137"	0.043"	AB	No. 0	48	82°	Standard	52 Ga.	10	000000000	0000
										1/2"	0.137"	0.043"	AB	No. 0	48	82°	Standard	52 Ga.	10	000000000	0000




												No. 2 Screw Size

												1/4"	0.162"	0.051"	AB	No. 1	32	82°	Standard	48 Ga.	50	000000000	0000


												3/8"	0.162"	0.051"	AB	No. 1	32	82°	Standard	48 Ga.	50	000000000	0000
												1/2"	0.162"	0.051"	AB	No. 1	32	82°	Standard	48 Ga.	50	000000000	0000




												No. 4 Screw Size

												1/4"	0.212"	0.047"	AB	No. 1	24	82°	Undercut	44 Ga.	100	000000000	0000


												3/8"	0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	100	000000000	0000
												1/2"	0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	100	000000000	0000
												5/8"	0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	100	000000000	0000
												3/4"	0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	100	000000000	0000
												1"	0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	100	000000000	0000
												1 1/4"	0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	50	000000000	0000
1 1/2"												0.212"	0.067"	AB	No. 1	24	82°	Standard	44 Ga.	50	000000000	00000




												No. 6 Screw Size

												1/4"	0.262"	0.059"	A, AB	No. 2	18	82°	Undercut	32 Ga.	100	000000000	00000


												3/8"	0.262"	0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
												1/2"	0.262"	0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
												5/8"	0.262"	0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
		3/4"										0.262"	0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
		7/8"	0.262"									0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
		1"	0.262"									0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
		1 1/4"	0.262"									0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
		1 1/2"	0.262"									0.083"	A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
		1 3/4"	0.262"	0.083"								A, AB	No. 2	18	82°	Standard	32 Ga.	100	000000000	0000
		2"	0.262"	0.083"	A, AB							No. 2	18	82°	Standard	32 Ga.	100	000000000	0000


		2 1/2"	0.262"	0.083"	A, AB							No. 2	18	82°	Standard	32 Ga.	25	000000000	00000
		3"	0.262"	0.083"	A, AB							No. 2	18	82°	Standard	32 Ga.	25	000000000	00000




				No. 8 Screw Size

				3/8"	0.312"	0.07"						A, AB	No. 2	15	82°	Undercut	29 Ga.	100	000000000	0000


				1/2"	0.312"	0.1"	A, AB					No. 2	15	82°	Standard	29 Ga.	100	000000000	0000
				5/8"	0.312"	0.1"	A, AB					No. 2	15	82°	Standard	29 Ga.	100	000000000	0000
				3/4"	0.312"	0.1"	A, AB					No. 2	15	82°	Standard	29 Ga.	100	000000000	0000
				7/8"	0.312"	0.1"	A, AB					No. 2	15	82°	Standard	29 Ga.	100	000000000	0000
				1"	0.312"	0.1"	A, AB					No. 2	15	82°	Standard	29 Ga.	100	000000000	0000
				1 1/4"	0.312"	0.1"	A, AB					No. 2	15	82°	Standard	29 Ga.	100	000000000	0000
				1 1/2"	0.312"	0.1"	A, AB					No. 2	15	82°	Standard	29 Ga.	100	000000000	00000
				1 3/4"	0.312"	0.1"	A, AB					No. 2	15	82°	Standard	29 Ga.	100	000000000	00000
				2"	0.312"	0.1"	A, AB			No. 2		15	82°	Standard	29 Ga.	100	000000000	00000
				2 1/2"	0.312"	0.1"	A, AB			No. 2	15	82°	Standard	29 Ga.	100	000000000	00000


				3"	0.312"	0.1"	A, AB			No. 2	15	82°	Standard	29 Ga.	100	000000000	00000




						No. 10 Screw Size

						3/8"	0.362"			0.081"	A, AB	No. 2	12	82°	Undercut	21 Ga.	100	000000000	0000


						1/2"	0.362"	0.081"	A, AB	No. 2	12	82°	Undercut	21 Ga.	100	000000000	0000
						5/8"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	0000
						3/4"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	0000
						7/8"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	00000
						1"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	00000
						1 1/4"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	00000
						1 1/2"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	00000
						1 3/4"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	00000
						2"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	00000
						2 1/4"	0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	100	000000000	00000


2 1/2"						0.362"	0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	50	000000000	00000
3"	0.362"					0.116"	A, AB	No. 2	12	82°	Standard	21 Ga.	50	000000000	00000




						No. 12 Screw Size

						1/2"	0.412"	0.092"	A, AB	No. 3	11	82°	Undercut	3/16"	100	000000000	00000


						5/8"	0.412"	0.132"	A, AB	No. 3	11	82°	Standard	3/16"	100	000000000	00000
						3/4"	0.412"	0.132"	A, AB	No. 3	11	82°	Standard	3/16"	100	000000000	00000
						7/8"	0.412"	0.132"	A, AB	No. 3	11	82°	Standard	3/16"	100	000000000	00000
						1"	0.412"	0.132"	A, AB	No. 3	11	82°	Standard	3/16"	100	000000000	00000
						1 1/4"	0.412"	0.132"	A, AB	No. 3	11	82°	Standard	3/16"	100	000000000	00000
						1 1/2"	0.412"	0.132"	A, AB	No. 3	11	82°	Standard	3/16"	100	000000000	00000
						1 3/4"	0.412"	0.132"	A, AB	No. 3	11	82°	Standard	3/16"	50	000000000	00000
						2"	0.412"	0.132"	A, AB	No. 3	11	82°	Standard	3/16"	50	000000000	00000
						2 1/2"	0.412"	0.132"	A, AB	No. 3	11	82°	Standard	3/16"	50	000000000	00000
						3"	0.412"	0.132"	A, AB	No. 3	11	82°	Standard	3/16"	50	000000000	00000




						No. 14 Screw Size

						1/2"	0.462"	0.103"	A, AB	No. 3	10	82°	Undercut	5.5 mm	25	000000000	0000


						5/8"	0.462"	0.103"	A, AB	No. 3	10	82°	Undercut	5.5 mm	100	000000000	00000
						3/4"	0.462"	0.148"	A, AB	No. 3	10	82°	Standard	5.5 mm	100	000000000	00000
						7/8"	0.462"	0.148"	A, AB	No. 3	10	82°	Standard	5.5 mm	50	000000000	00000
						1"	0.462"	0.148"	A, AB	No. 3	10	82°	Standard	5.5 mm	100	000000000	00000
						1 1/4"	0.462"	0.148"	A, AB	No. 3	10	82°	Standard	5.5 mm	100	000000000	00000
						1 1/2"	0.462"	0.148"	A, AB	No. 3	10	82°	Standard	5.5 mm	50	000000000	00000
						1 3/4"	0.462"	0.148"	A, AB	No. 3	10	82°	Standard	5.5 mm	50	000000000	00000
						2"	0.462"	0.148"	A, AB	No. 3	10	82°	Standard	5.5 mm	50	000000000	00000
						2 1/2"	0.462"	0.148"	A, AB	No. 3	10	82°	Standard	5.5 mm	50	000000000	00000
						3"	0.462"	0.148"	A, AB	No. 3	10	82°	Standard	5.5 mm	25	000000000	00000

Fasten door hinges with screws that blend in. The beveled flat head fits into countersunk holes, while the finish matches the look of your door hardware.

Length is measured from the top of the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Head
	Lg.	Dia.	Ht.	Tapping Screw Type	Drive Size	Approx. Threads per In.	Countersink Angle	Flat Head Profile	Drill Bit Size	Shank Cross Section	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				No. 12 Screw Size

				1/2"	0.412"	0.092"	F	No. 3	24	82°	Undercut	8 Ga.	Round	25	000000000	00000


				Brass-Plated Steel







								No. 12 Screw Size

								1/2"	0.412"	0.092"	F	No. 3	24	82°	Undercut	8 Ga.	Round	10	000000000	0000


								Bronze-Plated Steel







												No. 12 Screw Size

												1/2"	0.412"	0.092"	F	No. 3	24	82°	Undercut	8 Ga.	Round	25	000000000	00000


												Chrome-Plated Steel







																No. 12 Screw Size

																1/2"	0.412"	0.092"	F	No. 3	24	82°	Undercut	8 Ga.	Round	25	000000000	00000

Stainless Steel Phillips Flat Head Screws for Sheet Metal

These corrosion-resistant screws fasten trim, brackets, and other objects with countersunk holes to sheet metal. The head is flat on top and beveled underneath to sit flush with surfaces. Screws have a pointed tip that starts a hole in sheets up to 0.025" thick, but for thicker material you’ll need to drill first. The Phillips drive handles enough torque to keep drivers from slipping.

Length is measured from the top of the head.

410 Stainless Steel—Tougher and more wear resistant than other stainless steel screws but less corrosion resistant.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these screws withstand harsh weather, salt water, and most chemicals.

		Head
	Lg.	Dia.	Ht.	Tapping Screw Type	Drive Size	Approx. Threads per In.	Countersink Angle	Flat Head Profile	Drill Bit Size	Specs. Met	Pkg. Qty.		Pkg.
410 Stainless Steel







				No. 6 Screw Size

				1/2"	0.262"	0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	00000


				3/4"	0.262"	0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	0000




						No. 8 Screw Size

						1/2"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	0000


						5/8"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	0000
						3/4"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	00000
						1"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	00000




								No. 10 Screw Size

								3/4"	0.362"	0.116"	A	No. 2	12	82°	Standard	21 Ga.	—	100	000000000	00000


								1"	0.362"	0.116"	A	No. 2	12	82°	Standard	21 Ga.	—	100	000000000	00000


								18-8 Stainless Steel







												No. 0 Screw Size

												1/8"	0.112"	0.025"	AB	No. 0	48	82°	Undercut	55 Ga.	—	50	000000000	0000


												3/16"	0.112"	0.025"	AB	No. 0	48	82°	Undercut	55 Ga.	—	50	000000000	0000
												1/4"	0.112"	0.035"	AB	No. 0	48	82°	Standard	55 Ga.	—	10	000000000	0000
												5/16"	0.112"	0.035"	AB	No. 0	48	82°	Standard	55 Ga.	—	50	000000000	0000
												3/8"	0.112"	0.035"	AB	No. 0	48	82°	Standard	55 Ga.	—	10	000000000	0000
												1/2"	0.112"	0.035"	AB	No. 0	48	82°	Standard	55 Ga.	—	10	000000000	0000




														No. 1 Screw Size

														1/8"	0.137"	0.031"	AB	No. 0	42	82°	Undercut	52 Ga.	—	50	000000000	0000


3/16"														0.137"	0.031"	AB	No. 0	42	82°	Undercut	52 Ga.	—	50	000000000	0000
1/4"	0.137"													0.043"	AB	No. 0	42	82°	Standard	52 Ga.	—	10	000000000	0000
5/16"	0.137"													0.043"	AB	No. 0	42	82°	Standard	52 Ga.	—	50	000000000	0000
3/8"	0.137"													0.043"	AB	No. 0	42	82°	Standard	52 Ga.	—	10	000000000	0000
1/2"	0.137"													0.043"	AB	No. 0	42	82°	Standard	52 Ga.	—	10	000000000	0000




		No. 2 Screw Size

		1/8"	0.162"											0.036"	AB	No. 1	32	82°	Undercut	48 Ga.	—	50	000000000	0000


		3/16"	0.162"											0.036"	AB	No. 1	32	82°	Undercut	48 Ga.	—	50	000000000	0000
		1/4"	0.162"											0.051"	A	No. 1	32	82°	Standard	48 Ga.	—	100	000000000	0000
		5/16"	0.162"	0.051"										A	No. 1	32	82°	Standard	48 Ga.	—	50	000000000	0000
		3/8"	0.162"	0.051"	A									No. 1	32	82°	Standard	48 Ga.	—	100	000000000	0000
		1/2"	0.162"	0.051"	A									No. 1	32	82°	Standard	48 Ga.	—	100	000000000	0000




				No. 4 Screw Size

				1/4"	0.212"									0.047"	A	No. 1	24	82°	Undercut	44 Ga.	—	100	000000000	0000


				5/16"	0.212"									0.067"	A	No. 1	24	82°	Standard	44 Ga.	—	100	000000000	0000
				3/8"	0.212"	0.067"								A	No. 1	24	82°	Standard	44 Ga.	—	100	000000000	0000
				1/2"	0.212"	0.067"	A							No. 1	24	82°	Standard	44 Ga.	—	100	000000000	0000
				5/8"	0.212"	0.067"	A							No. 1	24	82°	Standard	44 Ga.	—	100	000000000	0000
				3/4"	0.212"	0.067"	A							No. 1	24	82°	Standard	44 Ga.	—	100	000000000	0000
				7/8"	0.212"	0.067"	AB							No. 1	24	82°	Standard	44 Ga.	ASME B18.6.4	50	000000000	00000
				1"	0.212"	0.067"	A							No. 1	24	82°	Standard	44 Ga.	—	100	000000000	0000
				1 1/4"	0.212"	0.067"	A							No. 1	24	82°	Standard	44 Ga.	—	50	000000000	0000
				1 1/2"	0.212"	0.067"	A							No. 1	24	82°	Standard	44 Ga.	—	50	000000000	0000




						No. 5 Screw Size

						1/2"	0.237"	0.075"	A					No. 2	20	82°	Standard	36 Ga.	—	10	000000000	0000


						5/8"	0.237"	0.075"	A	No. 2				20	82°	Standard	36 Ga.	—	10	000000000	0000
						3/4"	0.237"	0.075"	A	No. 2	20			82°	Standard	36 Ga.	—	10	000000000	0000




								No. 6 Screw Size

								1/4"	0.262"	0.059"	A			No. 2	20	82°	Undercut	32 Ga.	—	100	000000000	0000


								3/8"	0.262"	0.058"	A			No. 2	18	82°	Undercut	32 Ga.	—	100	000000000	0000
								3/8"	0.262"	0.083"	A			No. 2	18	82°	Standard	32 Ga.	—	100	000000000	0000
								1/2"	0.262"	0.058"	A			No. 2	18	82°	Undercut	32 Ga.	—	100	000000000	0000
								1/2"	0.262"	0.083"	A			No. 2	18	82°	Standard	32 Ga.	—	100	000000000	0000
								5/8"	0.262"	0.058"	A	No. 2		18	82°	Undercut	32 Ga.	—	100	000000000	0000
								5/8"	0.262"	0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	0000
								3/4"	0.262"	0.058"	A	No. 2	18	82°	Undercut	32 Ga.	—	100	000000000	0000
								3/4"	0.262"	0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	0000
								7/8"	0.262"	0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	0000
								1"	0.262"	0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	0000


								1 1/4"	0.262"	0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	0000
								1 1/2"	0.262"	0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	00000
1 3/4"								0.262"	0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	00000
2"	0.262"							0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	00000
2 1/2"	0.262"							0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	50	000000000	0000




								No. 7 Screw Size

								5/8"	0.287"	0.091"	A	No. 2	16	82°	Standard	30 Ga.	—	50	000000000	0000




		No. 8 Screw Size

		3/8"	0.312"							0.07"	AB	No. 2	18	82°	Undercut	29 Ga.	—	100	000000000	00000


		1/2"	0.312"							0.07"	A	No. 2	15	82°	Undercut	29 Ga.	—	100	000000000	0000
		1/2"	0.312"							0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	0000
		5/8"	0.312"							0.07"	A	No. 2	15	82°	Undercut	29 Ga.	—	100	000000000	00000
		5/8"	0.312"							0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	0000
		3/4"	0.312"							0.07"	A	No. 2	15	82°	Undercut	29 Ga.	—	100	000000000	00000
		3/4"	0.312"							0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	0000
		7/8"	0.312"							0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	0000
		1"	0.312"							0.07"	A	No. 2	15	82°	Undercut	29 Ga.	—	100	000000000	00000
		1"	0.312"							0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	0000
		1 1/4"	0.312"							0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	00000


		1 1/2"	0.312"							0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	00000
		1 3/4"	0.312"							0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	50	000000000	0000
		2"	0.312"	0.1"						A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	00000
		2 1/4"	0.312"	0.1"	A					No. 2	15	82°	Standard	29 Ga.	ASME B18.6.4	25	000000000	00000
		2 1/2"	0.312"	0.1"	A					No. 2	15	82°	Standard	29 Ga.	—	100	000000000	00000
		3"	0.312"	0.1"	A					No. 2	15	82°	Standard	29 Ga.	—	50	000000000	00000
		3 1/2"	0.312"	0.1"	A					No. 2	15	82°	Standard	29 Ga.	—	50	000000000	00000




				No. 10 Screw Size

				3/8"	0.362"					0.081"	A	No. 2	16	82°	Undercut	21 Ga.	—	100	000000000	0000


				1/2"	0.362"	0.081"	A			No. 2	12	82°	Undercut	21 Ga.	—	100	000000000	0000
				5/8"	0.362"	0.081"	A			No. 2	12	82°	Undercut	21 Ga.	—	100	000000000	00000
				5/8"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	100	000000000	0000
				3/4"	0.362"	0.081"	A			No. 2	12	82°	Undercut	21 Ga.	—	100	000000000	00000
				3/4"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	100	000000000	00000
				7/8"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	100	000000000	0000
				1"	0.362"	0.081"	A			No. 2	12	82°	Undercut	21 Ga.	—	50	000000000	00000
				1"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	100	000000000	00000
				1 1/4"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	100	000000000	00000
				1 1/2"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	100	000000000	00000


				1 3/4"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	50	000000000	00000
				2"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	50	000000000	00000
				2 1/4"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	ASME B18.6.4	25	000000000	00000
				2 1/2"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	50	000000000	00000
				3"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	50	000000000	00000
				3 1/2"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	25	000000000	0000
				4"	0.362"	0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	25	000000000	00000




	No. 12 Screw Size

	1/2"				0.412"	0.092"	A			No. 3	11	82°	Undercut	3/16"	—	100	000000000	00000


	5/8"				0.412"	0.092"	A			No. 3	11	82°	Standard	3/16"	—	100	000000000	00000
	3/4"				0.412"	0.092"	A			No. 3	11	82°	Undercut	3/16"	—	50	000000000	0000
	3/4"				0.412"	0.132"	A			No. 3	11	82°	Standard	3/16"	—	100	000000000	00000
	1"				0.412"	0.132"	A			No. 3	11	82°	Standard	3/16"	—	100	000000000	00000
	1 1/4"				0.412"	0.132"	A	No. 3		11	82°	Standard	3/16"	—	50	000000000	00000
	1 1/2"				0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	—	50	000000000	00000
	1 3/4"				0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	—	50	000000000	00000
	2"				0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	—	50	000000000	00000
	2 1/4"				0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	ASME B18.6.4	10	000000000	0000
	2 1/2"				0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	—	50	000000000	00000


	3"				0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	—	50	000000000	00000
	3 1/2"				0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	—	25	000000000	00000
	4"				0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	—	25	000000000	00000




						No. 14 Screw Size

						1/2"	0.462"	0.103"	A	No. 3	14	82°	Undercut	5.5 mm	—	50	000000000	0000


						5/8"	0.462"	0.103"	A	No. 3	10	82°	Undercut	5.5 mm	—	50	000000000	0000
						3/4"	0.462"	0.103"	A	No. 3	10	82°	Undercut	5.5 mm	—	50	000000000	00000
						3/4"	0.462"	0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	50	000000000	00000
						1"	0.462"	0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	50	000000000	00000
						1 1/4"	0.462"	0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	50	000000000	00000
						1 1/2"	0.462"	0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	25	000000000	0000
		1 3/4"				0.462"	0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	25	000000000	0000
		2"	0.462"			0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	25	000000000	00000
		2 1/4"	0.462"			0.148"	A	No. 3	10	82°	Standard	5.5 mm	ASME B18.6.4	10	000000000	00000
		2 1/2"	0.462"			0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	25	000000000	00000


		3"	0.462"			0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	25	000000000	00000
		3 1/2"	0.462"			0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	10	000000000	0000
		4"	0.462"			0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	10	000000000	0000
		5"	0.462"			0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	10	000000000	00000
		6"	0.462"			0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	5	000000000	00000


		Highly Corrosion-Resistant 316 Stainless Steel







								No. 2 Screw Size

								1/4"	0.162"	0.051"	A	No. 1	32	82°	Standard	48 Ga.	—	100	000000000	0000


								3/8"	0.162"	0.051"	A	No. 1	32	82°	Standard	48 Ga.	—	100	000000000	0000
								1/2"	0.162"	0.051"	A	No. 1	32	82°	Standard	48 Ga.	—	100	000000000	0000




								No. 4 Screw Size

								1/4"	0.212"	0.047"	AB	No. 1	24	82°	Undercut	44 Ga.	—	100	000000000	0000


								3/8"	0.212"	0.047"	A	No. 1	24	82°	Undercut	44 Ga.	—	100	000000000	0000
								1/2"	0.212"	0.067"	A	No. 1	24	82°	Standard	44 Ga.	—	100	000000000	0000
								5/8"	0.212"	0.067"	A	No. 1	24	82°	Standard	44 Ga.	—	100	000000000	0000
								3/4"	0.212"	0.067"	A	No. 1	24	82°	Standard	44 Ga.	—	100	000000000	0000
								1"	0.212"	0.067"	A	No. 1	24	82°	Standard	44 Ga.	—	100	000000000	00000




										No. 6 Screw Size

										1/4"	0.262"	0.059"	AB	No. 2	18	82°	Undercut	32 Ga.	—	100	000000000	0000


	3/8"									0.262"	0.059"	A	No. 2	18	82°	Undercut	32 Ga.	—	100	000000000	0000
	1/2"									0.262"	0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	0000
	5/8"				0.262"					0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	0000
	3/4"				0.262"					0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	00000
	1"				0.262"					0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	100	000000000	00000
	1 1/4"				0.262"					0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	50	000000000	0000
	1 1/2"				0.262"					0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	50	000000000	0000
	2"				0.262"					0.083"	A	No. 2	18	82°	Standard	32 Ga.	—	50	000000000	00000




										No. 8 Screw Size

										3/8"	0.312"	0.07"	AB	No. 2	15	82°	Undercut	29 Ga.	—	100	000000000	0000


										1/2"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	00000
										5/8"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	00000
										3/4"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	00000
										7/8"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	100	000000000	00000
										1"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	50	000000000	0000
										1 1/4"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	50	000000000	00000
										1 1/2"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	50	000000000	00000
										1 3/4"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	25	000000000	0000
										2"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	25	000000000	0000
										2 1/2"	0.312"	0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	25	000000000	00000


		3"	0.312"							0.1"	A	No. 2	15	82°	Standard	29 Ga.	—	25	000000000	00000




						No. 10 Screw Size

						1/2"	0.362"			0.081"	A	No. 2	12	82°	Undercut	21 Ga.	—	50	000000000	0000


						5/8"	0.362"			0.081"	A	No. 2	12	82°	Undercut	21 Ga.	—	50	000000000	0000
						3/4"	0.362"			0.116"	A	No. 2	12	82°	Standard	21 Ga.	—	50	000000000	00000
						1"	0.362"			0.116"	A	No. 2	12	82°	Standard	21 Ga.	—	50	000000000	00000
						1 1/4"	0.362"			0.116"	A	No. 2	12	82°	Standard	21 Ga.	—	25	000000000	0000
1 1/2"						0.362"	0.116"			A	No. 2	12	82°	Standard	21 Ga.	—	25	000000000	0000
1 3/4"				0.362"		0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	25	000000000	00000
2"				0.362"		0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	25	000000000	00000
2 1/2"				0.362"		0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	25	000000000	00000
3"				0.362"		0.116"	A			No. 2	12	82°	Standard	21 Ga.	—	10	000000000	0000




						No. 12 Screw Size

						3/4"	0.412"			0.132"	A	No. 3	11	82°	Standard	3/16"	—	25	000000000	0000


						1"	0.412"			0.132"	A	No. 3	11	82°	Standard	3/16"	—	25	000000000	0000
						1 1/4"	0.412"			0.132"	A	No. 3	11	82°	Standard	3/16"	—	25	000000000	0000
						1 1/2"	0.412"	0.132"		A	No. 3	11	82°	Standard	3/16"	—	10	000000000	0000
						2"	0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	—	10	000000000	0000
						2 1/2"	0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	—	10	000000000	0000
						3"	0.412"	0.132"	A	No. 3	11	82°	Standard	3/16"	—	10	000000000	0000




								No. 14 Screw Size

								3/4"	0.462"	0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	25	000000000	0000


								1"	0.462"	0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	10	000000000	0000
								1 1/4"	0.462"	0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	10	000000000	0000
	1 1/2"							0.462"	0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	10	000000000	0000
	2"				0.462"			0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	10	000000000	0000
	2 1/2"				0.462"			0.148"	A	No. 3	10	82°	Standard	5.5 mm	—	10	000000000	0000