McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    52 Products

    Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Hoist Rings—For Lifting.

    180° Pivot

    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Hoist Rings—For Lifting.

    360° Swivel

    Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    High Visibility—High-visibility hoist rings are fluorescent green, so they’re easy to distinguish from other hardware when attached to equipment being lifted.
    Machined—Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
    Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.
    Nickel-Plated Steel—Nickel-plated steel hoist rings are more corrosion resistant than black-oxide steel hoist rings.
    316 Stainless Steel—316 stainless steel hoist rings are the most corrosion resistant.
    CE Marked—Hoist rings that are CE marked meet European safety standards.
    Each
    Thread
    Size
    Thread
    Lg.
    Inside
    Wd.
    Overall
    Ht.
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Mil. Spec.
    1-9
    10-Up
     
    Forged Black-Oxide Steel
    1/4"-20
    		1/2"13/16"3 1/4"600180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.MIL-STD-1365, MIL-STD-209000000000000000000000
    1/4"-20
    		9/16"1 1/4"3 7/8"550180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.MIL-STD-1365, MIL-STD-20900000000000000000
     
    Forged Fluorescent Green Powder-Coated Steel—High Visibility
    1/4"-20
    		9/16"1 5/16"3 13/16"550180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.MIL-STD-1365, MIL-STD-20900000000000000000
     
    Forged Nickel-Plated Steel
    1/4"-20
    		1/2"15/16"3 1/4"600180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.MIL-STD-1365, MIL-STD-20900000000000000000000
     
    Machined 316 Stainless Steel
    1/4"-20
    		9/16"15/16"3 1/4"300180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.MIL-STD-1365, MIL-STD-2090000000000000000000
     

    Eyebolts—For Lifting

    Also known as machinery eyebolts.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1/4"-20
    		1"1"25/32"500ASTM A489Fully Threaded2 1/2"0000000000002 1/8"000000000000
    1/4"-20
    		2"2"3/4"500—Fully Threaded3 3/8"00000000000003 1/4"0000000000000
    1/4"-20
    		3"3"3/4"500—Fully Threaded————04 1/4"0000000000000
    1/4"-20
    		3"3"25/32"500—Fully Threaded4 1/2"000000000000————0
     
    Zinc-Plated Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    Zinc-plated steel eyebolts offer good corrosion resistance.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Threading
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1/4"-20
    		1"1"3/4"500Fully Threaded2 3/8"00000000000002 1/4"0000000000000
    1/4"-20
    		2"2"3/4"500Fully Threaded3 3/8"00000000000003 1/4"0000000000000
    1/4"-20
    		3"3"3/4"500Fully Threaded4 3/8"00000000000004 1/4"0000000000000
     
    304 Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    304 stainless steel eyebolts are more corrosion resistant than galvanized steel.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Fastener Strength
    Grade/Class
    Specs.
    Met
    Threading
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1/4"-20
    		1"1"3/4"450——Fully Threaded2 3/8"000000000000002 3/8"00000000000000
    1/4"-20
    		1 1/2"1 1/2"3/4"500ASTM Grade B8
    		ASTM A193
    		Fully Threaded2 7/8"0000000000000————0
    1/4"-20
    		2"2"3/4"500ASTM Grade B8
    		ASTM A193
    		Fully Threaded3 3/8"0000000000000————0
    1/4"-20
    		3"3"3/4"500ASTM Grade B8
    		ASTM A193
    		Fully Threaded4 3/8"0000000000000————0
    1/4"-20
    		4"4"3/4"500ASTM Grade B8
    		ASTM A193
    		Fully Threaded5 3/8"0000000000000————0
     
    316 Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    316 stainless steel eyebolts are the most corrosion resistant.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Threading
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1/4"-20
    		1"1"3/4"500Fully Threaded2 3/8"00000000000002 1/4"0000000000000
    1/4"-20
    		3"3"3/4"500Fully Threaded4 3/8"0000000000004 1/4"000000000000
     

    Hoist Ring Assortments—For Lifting

    Image of Product. Hoist Ring Assembly (Retaining Ring Not Pictured). Front orientation. Contains Annotated. Hoist Rings. Hoist Ring Assortments—For Lifting.
    Image of Product. Front orientation. Hoist Rings. Hoist Ring Assortments—For Lifting.

    Hoist Ring Assembly

    (Retaining Ring Not

    Pictured)

    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Hoist Ring Assortments—For Lifting.
    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Hoist Ring Assortments—For Lifting.

    180° Pivot

    360° Swivel

    Keep on hand all the parts needed to assemble custom hoist rings. Ideal for angular lifting, these hoist rings will withstand stresses that bend or break eyebolts. The base of these hoist rings will swivel 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. The shackle will pivot 180° front to back. All parts have a black oxide finish for mild corrosion resistance.
    Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    No. of
    Pieces
    Thread Size
    Movement
    Includes
    Specs. Met
    Each
     
    Forged Black-Oxide Steel
    1241/4"-20
    5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13
    5/8"-11
    3/4"-10
    		180° Pivot and 360° SwivelFour 3/8" Dia. Shackles
    Four 1/2" Dia. Shackles
    Four 3/4" Dia. Shackles
    Four 1/4"-20 Bolts for 3/8" Dia. Shackle—600 lbs. Capacity and 1/2" Thread Lg.
    Four 5/16"-18 Bolts for 3/8" Dia. Shackle—800 lbs. Capacity and 1/2" Thread Lg.
    Four 3/8"-16 Bolts for 3/8" Dia. Shackle—1,000 lbs. Capacity and 1/2" Thread Lg.
    Four 7/16"-14 Bolts for 1/2" Dia. Shackle—2,000 lbs. Capacity and 1" Thread Lg.
    Four 1/2"-13 Bolts for 1/2" Dia. Shackle—2,500 lbs. Capacity and 1" Thread Lg.
    Four 5/8"-11 Bolts for 3/4" Dia. Shackle—4,000 lbs. Capacity and 1" Thread Lg.
    Four 3/4"-10 Bolts for 3/4" Dia. Shackle—5,000 lbs. Capacity and 1" Thread Lg.
    28 Bushings
    28 Retaining Rings
    28 Washers    		ASME B30.260000000000000000
     

    Eye Nuts—For Lifting

    Image of Product. Front orientation. Eye Nuts. Eye Nuts—For Lifting, Style B.
    Image of Product. Front orientation. Eye Nuts. Eye Nuts—For Lifting, Style C.

    Style B

    Style C

    Create your own lifting eye by adding an eye nut to a stud or bolt.
    Note: Capacity applies to the eye nut only. The stud or bolt you use will affect the overall capacity. Eye nuts are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Fully Threaded
    Image of Product. Front orientation. Eye Nuts. Eye Nuts—For Lifting, Style B.

    Style B

    Image of Product. Front orientation. Eye Nuts. Eye Nuts—For Lifting, Style C.

    Style C

    Zinc-Plated Steel—Zinc-plated steel eye nuts offer good corrosion resistance.
    Galvanized Steel—Galvanized steel eye nuts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.
    316 Stainless Steel—316 stainless steel are the most corrosion resistant eye nuts.
    Style
    Thread
    Size
    Overall
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Each
    Steel
     
    Closed Eye Nuts
    B1/4"-20
    		1 11/16"3/4"5000000000000000
     
    Zinc-Plated Steel
     
    Closed Eye Nuts
    C1/4"-20
    		1 7/16"13/16"17500000000000
     
    Galvanized Steel
     
    Closed Eye Nuts
    B1/4"-20
    		1 5/8"3/4"52000000000000
     
    316 Stainless Steel
     
    Closed Eye Nuts
    B1/4"-20
    		1 5/8"3/4"500000000000000
     

    Eyebolts with Nuts—For Lifting

    Also known as nut eyebolts, these are designed for through-hole applications.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Galvanized Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts with Nuts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts with Nuts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    Galvanized steel eyebolts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    Nuts
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Threading
    Number
    Included
    Type
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1/4"-20
    		1 1/2"2"1/2"500Partially Threaded1Hex
    		3 1/8"0000000000003"000000000000
    1/4"-20
    		1 1/2"3"1/2"500Partially Threaded1Hex
    		4 1/8"000000000004"00000000000
    1/4"-20
    		2"4"1/2"500Partially Threaded1Hex
    		5 1/8"000000000005"00000000000
    1/4"-20
    		2 1/2"5"1/2"500Partially Threaded1Hex
    		————06"00000000000
    1/4"-20
    		3"6"1/2"500Partially Threaded1Hex
    		————07"00000000000
     
    304 Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts with Nuts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts with Nuts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    304 stainless steel eyebolts are more corrosion resistant than galvanized steel.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    Nuts
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Threading
    Number
    Included
    Type
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1/4"-20
    		1"4"1/2"450Partially Threaded1Hex
    		————05"0000000000000
    1/4"-20
    		1"4"3/4"450Partially Threaded1Hex
    		5 3/8"0000000000000————0
     
    316 Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts with Nuts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts with Nuts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    316 stainless steel eyebolts are the most corrosion resistant.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    Nuts
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Threading
    Number
    Included
    Type
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1/4"-20
    		1"1 1/4"1/2"500Partially Threaded1Hex
    		2 3/8"00000000000002 1/4"0000000000000
    1/4"-20
    		1 1/2"2"1/2"500Partially Threaded1Hex
    		3 1/8"0000000000003"000000000000
    1/4"-20
    		2"4"1/2"500Partially Threaded1Hex
    		5 1/8"0000000000005"000000000000
     

    Low-Visibility Eyebolts—For Lifting

    The matte black-oxide finish won't reflect light, allowing the eyebolts to blend into the background.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Black-Oxide Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Low-Visibility Eyebolts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Low-Visibility Eyebolts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye,

    With

    Shoulder

    Closed Eye,

    Without

    Shoulder

    Black-oxide steel eyebolts are more corrosion resistant than zinc-plated steel.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Threading
    Appearance
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1/4"-20
    		1"1"3/4"500Fully ThreadedDull2 3/8"0000000000002 1/4"000000000000
     

    Nylon-Coated Eyebolts—For Lifting

    Route wire and cable through the smooth eye without snagging.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Nylon-Coated Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Nylon-Coated Eyebolts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Nylon-Coated Eyebolts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Threading
    Temp. Range,
    ° F
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1/4"-20
    		1"1"3/4"500Fully Threaded30 to 2752 3/8"0000000000002 1/4"000000000000
     
    back to top