McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    10 Products

    Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Hoist Rings—For Lifting.

    180° Pivot

    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Hoist Rings—For Lifting.

    360° Swivel

    Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    Machined—Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
    Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.
    Nickel-Plated Steel—Nickel-plated steel hoist rings are more corrosion resistant than black-oxide steel hoist rings.
    CE Marked—Hoist rings that are CE marked meet European safety standards.
    Each
    Thread
    Size
    Thread
    Lg.
    Inside
    Wd.
    Overall
    Ht.
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Mil. Spec.
    1-9
    10-Up
     
    Forged Black-Oxide Steel
    2"-4 1/2
    		3"4"12 1/4"30,000180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2092994T8400000000000000
     
    Machined Black-Oxide Steel
    2"-4 1/2
    		3"4 1/2"15 1/2"30,000180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2093052T69000000000000
     
    Forged Nickel-Plated Steel
    2"-4 1/2
    		3"4"12 1/4"30,000180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2093145T89000000000000
     

    Swivel-Under-Load Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Swivel-Under-Load Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Swivel-Under-Load Hoist Rings—For Lifting, Swivel-Under-Load.

    180° Pivot

    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Swivel-Under-Load Hoist Rings—For Lifting, Swivel-Under-Load.

    360° Swivel

    The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended. For unbalanced or heavy loads, the base also swivels to compensate for pitch, roll, and sway. Their lifting ring pivots 180° front to back. Ideal for angular lifting, these hoist rings withstand stresses that bend or break eyebolts.
    Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    Thread
    Size
    Thread
    Lg.
    Inside
    Wd.
    Overall
    Ht.
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Each
     
    Forged Yellow Powder-Coated Steel
    2"-4 1/2
    		3"2 3/4"13 5/8"31,740180° Pivot and 360° SwivelASME B30.26CE Marked
    		4137N33000000000
     

    Eye Nuts—For Lifting

    Image of Product. Style B. Front orientation. Eye Nuts. Eye Nuts—For Lifting, Closed Eye Nuts, Style B.

    Style B

    Create your own lifting eye by adding an eye nut to a stud or bolt.
    Note: Capacity applies to the eye nut only. The stud or bolt you use will affect the overall capacity. Eye nuts are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Fully Threaded
    Image of Product. Style B. Front orientation. Eye Nuts. Eye Nuts—For Lifting, Closed Eye Nuts, Style B.

    Style B

    Galvanized Steel—Galvanized steel eye nuts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.
    Style
    Thread
    Size
    Overall
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Each
    Galvanized Steel
     
    Closed Eye Nuts
    B2"-4 1/2
    		9 15/16"4 1/8"40,0003019T410000000
     

    Eyebolts—For Lifting

    Create a secure attachment point for hooks, shackles, and other lifting equipment. Also known as machinery eyebolts, these eyebolts are used to lift heavy machines and materials. They have a closed eye that won’t bend under strain.
    Warning: Never use to lift people or items over people. Capacities listed are for vertical lifting only.
    Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, Steel.
    Image of Product. Without Shoulder. Front orientation. Without Shoulder. Eyebolts—For Lifting, Steel.

    With

    Shoulder

    Without

    Shoulder

    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Without Shoulder—For vertical lifting only.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    2"-4 1/2
    		3 3/8"4"3 1/4"38,000ASTM A489Fully Threaded11 1/2"3014T61000000010 9/16"3013T610000000
     
    Zinc-Plated Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, Zinc-Plated Steel.
    Image of Product. Without Sholder. Front orientation. Without Shoulder. Eyebolts—For Lifting, Zinc-Plated Steel.

    With

    Shoulder

    Without

    Sholder

    Zinc-plated steel eyebolts offer good corrosion resistance.
    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Without Shoulder—For vertical lifting only.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    2"-4 1/2
    		3 3/8"4"3 1/4"38,000ASTM A489Fully Threaded11 1/2"3014T193000000010 9/16"3013T1690000000
     

    Rotating Eyebolts—For Lifting

    Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
    Warning: Never use to lift people or items over people.
    Powder-Coated Steel
    Image of Product. Front orientation. Eyebolts. Rotating Eyebolts—For Lifting.
    Image of Attribute. Front orientation. Contains Annotated. Rotating Eyebolts—For Lifting.
    Powder-coated steel eyebolts are impact resistant, but less corrosion resistant than stainless steel eyebolts. They include a removable key for tightening the bolt.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Threading
    Color
    Overall
    Lg.
    Each
    Closed Eye
    2"-4 1/2
    		2 13/16"2 13/16"3 11/16"26,450Fully ThreadedPink9 7/8"3059T770000000
     
    back to top