McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    30 Products

    Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Hoist Rings—For Lifting.

    180° Pivot

    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Hoist Rings—For Lifting.

    360° Swivel

    Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    High Visibility—High-visibility hoist rings are fluorescent green, so they’re easy to distinguish from other hardware when attached to equipment being lifted.
    Machined—Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
    Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.
    Nickel-Plated Steel—Nickel-plated steel hoist rings are more corrosion resistant than black-oxide steel hoist rings.
    17-4 PH Stainless Steel—17-4 PH stainless steel hoist rings are more corrosion resistant than steel hoist rings.
    316 Stainless Steel—316 stainless steel hoist rings are the most corrosion resistant.
    CE Marked—Hoist rings that are CE marked meet European safety standards.
    Each
    Thread Size
    Thread
    Lg., mm
    Inside
    Wd., mm
    Overall
    Ht., mm
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Mil. Spec.
    1-9
    10-Up
     
    Forged Black-Oxide Steel
    M10 × 1.5 mm163398975180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2093005T72000000000000
    M10 × 1.5 mm2633108975180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2093005T1250000000000
     
    Machined Black-Oxide Steel
    M10 × 1.5 mm182186975180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-20929495T420000000000
     
    Forged Fluorescent Green Powder-Coated Steel—High Visibility
    M10 × 1.5 mm163398975180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2094157N23000000000000
     
    Forged Nickel-Plated Steel
    M10 × 1.5 mm163398975180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2093145T92000000000000
     
    Machined Nickel-Plated Steel
    M10 × 1.5 mm182186975180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2093145T42000000000000
     
    Forged 17-4 PH Stainless Steel
    M10 × 1.5 mm1538106975180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2093046T77000000000000
     
    Machined 316 Stainless Steel
    M10 × 1.5 mm182286550180° Pivot and 360° SwivelASME B30.26CE Marked, Mil. Spec.
    		MIL-STD-1365, MIL-STD-2092949T62000000000000
     

    Side-Mount Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Side-Mount Hoist Rings—For Lifting, D-Shape.
    Image of Product. D-Shape (Side View). Side1 orientation. Hoist Rings. Side-Mount Hoist Rings—For Lifting, D-Shape.
    Image of Product. Front orientation. Hoist Rings. Side-Mount Hoist Rings—For Lifting, Triangle.
    Image of Product. Triangle (Side View). Side1 orientation. Hoist Rings. Side-Mount Hoist Rings—For Lifting, Triangle.

    D-Shape

    D-Shape

    (Side

    View)

    Triangle

    Triangle

    (Side

    View)

    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Side-Mount Hoist Rings—For Lifting.
    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Side-Mount Hoist Rings—For Lifting.

    180° Pivot

    360° Swivel

    Choose these hoist rings when you need to lift your load from the side. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    D-Shape—D-shape hoist rings have a wider end than triangle hoists, so it’s easier to attach webbing and large hooks.
    Triangle—Triangle hoist rings have a narrow end to keep chain in place.
    Black-Oxide Steel—Black-oxide steel hoist rings have mild corrosion resistance.
    Thread Size
    Thread
    Lg., mm
    Inside
    Wd., mm
    Overall
    Ht., mm
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Each
    D-Shape
     
    Forged Black-Oxide Steel
    M10 × 1.5 mm20451011,100180° Pivot and 360° SwivelASME B30.26CE Marked
    		29525T65000000
    M10 × 1.5 mm2474154990180° Pivot and 360° SwivelASME B30.26—7995N42000000
     
    Triangle
     
    Forged Black-Oxide Steel
    M10 × 1.5 mm2438144990180° Pivot and 360° SwivelASME B30.26—7995N22000000
     

    Swivel-Under-Load Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Swivel-Under-Load Hoist Rings—For Lifting.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Swivel-Under-Load Hoist Rings—For Lifting, Swivel-Under-Load.
    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Swivel-Under-Load Hoist Rings—For Lifting, Swivel-Under-Load.

    180° Pivot

    360° Swivel

    The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended. For unbalanced or heavy loads, the base also swivels to compensate for pitch, roll, and sway. Their lifting ring pivots 180° front to back. Ideal for angular lifting, these hoist rings withstand stresses that bend or break eyebolts.
    Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    Thread Size
    Thread
    Lg., mm
    Inside
    Wd., mm
    Overall
    Ht., mm
    Vert. Cap.,
    lb.
    Movement
    Specs. Met
    Certification
    Each
     
    Forged Yellow Powder-Coated Steel
    M10 × 1.5 mm20351451,760180° Pivot and 360° SwivelASME B30.26CE Marked
    		4137N120000000
     

    Eyebolts—For Lifting

    Create a secure attachment point for hooks, shackles, and other lifting equipment. Also known as machinery eyebolts, these eyebolts are used to lift heavy machines and materials. They have a closed eye that won’t bend under strain.
    Warning: Never use to lift people or items over people. Capacities listed are for vertical lifting only.
    SteelAbout Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, Steel.

    With

    Shoulder

    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Threading
    Overall
    Lg., mm
    Each
    Closed Eye
    M10 × 1.5 mm2020271,600Fully Threaded753040T1400000
     
    Zinc-Plated Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, Zinc-Plated Steel.

    With

    Shoulder

    Zinc-plated steel eyebolts offer good corrosion resistance.
    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg., mm
    Each
    Closed Eye
    M10 × 1.5 mm171725500DIN 580Fully Threaded623107T4300000
     
    Galvanized Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, Galvanized Steel.

    With

    Shoulder

    Galvanized steel eyebolts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.
    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Threading
    Overall
    Lg., mm
    Each
    Closed Eye
    M10 × 1.5 mm3535281,600Fully Threaded924843T1400000
     
    304 Stainless Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, 304 Stainless Steel.

    With

    Shoulder

    304 stainless steel eyebolts are more corrosion resistant than galvanized steel.
    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg., mm
    Each
    Closed Eye
    M10 × 1.5 mm171725500DIN 580Fully Threaded623100T12000000
     
    316 Stainless Steel
    Image of Product. With Shoulder. Front orientation. With Shoulder. Eyebolts—For Lifting, 316 Stainless Steel.

    With

    Shoulder

    316 stainless steel eyebolts are the most corrosion resistant.
    With Shoulder—Use for lifting at angles up to 45° or for vertical lifting. Because angular lifting significantly reduces the eyebolt’s capacity, we recommend hoist rings for heavy loads.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Specs.
    Met
    Threading
    Overall
    Lg., mm
    Each
    Closed Eye
    M10 × 1.5 mm171725500DIN 580Fully Threaded623130T12000000
     

    Quick-Release-Pin Hoist Rings—For Lifting

    Image of Product. Front orientation. Hoist Rings. Quick-Release-Pin Hoist Rings—For Lifting, 180° Pivot.
    Image of Product. Front orientation. Hoist Rings. Quick-Release-Pin Hoist Rings—For Lifting, 180° Pivot and 360° Swivel.

    180°

    Pivot

    180° Pivot

    and 360°

    Swivel

    Image of Specification. Retractable Threads. Front orientation. Contains Border. Quick-Release Pin.
    Image of Specification. 180° Pivot. Front orientation. Contains Annotated. 180° Pivot. Quick-Release-Pin Hoist Rings—For Lifting.

    Retractable Threads

    180° Pivot

    Image of Specification. 360° Swivel. Front orientation. Contains Annotated. 360° Swivel. Quick-Release-Pin Hoist Rings—For Lifting.

    360° Swivel

    Easily slip these hoist rings in and out of threaded holes by pushing the button to retract their threads. Install them flush to your mounting surface. Ideal for angular lifting, these hoist rings withstand stresses that break or bend eyebolts.
    All are CE marked, so they meet European safety standards.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
    Warning: Never use to lift people or items over people.
    180° Pivot—The ring on 180° pivot hoist rings moves from front to back. Their base does not swivel for added stability.
    180° Pivot and 360° Swivel—180° pivot and 360° swivel hoist rings not only have a ring that moves from front to back, but their base also swivels to handle pitch, roll, and sway when lifting heavy or unbalanced loads.
    Thread Size
    Thread
    Lg., mm
    Inside
    Wd., mm
    Overall
    Ht., mm
    Pin Lg.,
    mm
    Vert. Cap.,
    lb.
    Specs.
    Met
    Certification
    Each
    Machined Steel
     
    180° Pivot
    M10 × 1.5 mm143010820875EN 13155CE Marked
    		4131N140000000
     
    180° Pivot and 360° Swivel
    M10 × 1.5 mm144614420875EN 13155CE Marked
    		4131N23000000
     

    Eye Nuts—For Lifting

    Image of Product. Style B. Front orientation. Eye Nuts. Eye Nuts—For Lifting, Closed Eye Nuts, Style B.
    Image of Product. Style C. Front orientation. Eye Nuts. Eye Nuts—For Lifting, Closed Eye Nuts, Style C.

    Style B

    Style C

    Create your own lifting eye by adding an eye nut to a stud or bolt.
    Note: Capacity applies to the eye nut only. The stud or bolt you use will affect the overall capacity. Eye nuts are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Fully Threaded
    Image of Product. Style B. Front orientation. Eye Nuts. Eye Nuts—For Lifting, Closed Eye Nuts, Style B.

    Style B

    Image of Product. Style C. Front orientation. Eye Nuts. Eye Nuts—For Lifting, Closed Eye Nuts, Style C.

    Style C

    Zinc-Plated Steel—Zinc-plated steel eye nuts offer good corrosion resistance.
    Galvanized Steel—Galvanized steel eye nuts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.
    304 Stainless Steel—304 stainless steel eye nuts are more corrosion resistant than galvanized steel.
    316 Stainless Steel—316 stainless steel are the most corrosion resistant eye nuts.
    Style
    Thread Size
    Overall
    Lg., mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Specs.
    Met
    Each
    Zinc-Plated Steel
     
    Closed Eye Nuts
    CM10 × 1.5 mm4525500DIN 5823112T5300000
     
    Galvanized Steel
     
    Closed Eye Nuts
    BM10 × 1.5 mm6431800—3019T3300000
     
    304 Stainless Steel
     
    Closed Eye Nuts
    CM10 × 1.5 mm4525500—3155T1200000
     
    316 Stainless Steel
     
    Closed Eye Nuts
    BM10 × 1.5 mm64321,150—3061T2800000
    CM10 × 1.5 mm4525500—3174T1200000
     

    Eyebolts with Nuts—For Lifting

    Also known as nut eyebolts, these are designed for through-hole applications.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    316 Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts with Nuts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Eyebolts with Nuts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    316 stainless steel eyebolts are the most corrosion resistant.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    Nuts
    With Shoulder
    Without Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Threading
    Number
    Included
    Type
    No. of Washers
    Included
    Overall
    Lg., mm
    Each
    Overall
    Lg., mm
    Each
    Closed Eye
    M10 × 1.5 mm2020191,200Fully Threaded1Hex
    		1573032T16000000583032T83000000
    M10 × 1.5 mm3964191,200Partially Threaded1Hex
    		11013032T18000001033032T8500000
     

    Rotating Eyebolts—For Lifting

    Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
    Warning: Never use to lift people or items over people.
    Powder-Coated Steel
    Image of Product. Front orientation. Eyebolts. Rotating Eyebolts—For Lifting.
    Image of Attribute. Front orientation. Contains Annotated. Rotating Eyebolts—For Lifting.
    Powder-coated steel eyebolts are impact resistant, but less corrosion resistant than stainless steel eyebolts. They include a removable key for tightening the bolt.
    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Threading
    Color
    Overall
    Lg., mm
    Each
    Closed Eye
    M10 × 1.5 mm151525850Fully ThreadedPink613059T1190000000
     

    Nylon-Coated Eyebolts—For Lifting

    Route wire and cable through the smooth eye without snagging.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Nylon-Coated Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Nylon-Coated Eyebolts—For Lifting, Closed Eye, With Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Size
    Lg.,
    mm
    Shank Lg.,
    mm
    Eye Dia.,
    mm
    Vert. Cap.,
    lb.
    Threading
    Temp. Range,
    ° F
    Overall
    Lg., mm
    Each
    Closed Eye
    M10 × 1.5 mm2020281,625Fully Threaded30 to 275757691T57000000
     
    back to top