Hammer-Driven Small Hole Punches
Use these punches to make round holes in soft, nonmetallic materials.
For technical drawings and 3-D models, click on a part number.
| For Hole Dia. | Lg. | Material | Each | |
For Use On Fabric, Leather, Rubber | ||||
|---|---|---|---|---|
| 9/32" | 4 1/2" | Steel | 0000000 | 000000 |
Compact Portable Lever-Operated Hole Punches
About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox. The lever handle provides extra punching force to quickly punch through metal. The punches have an adjustable throat to reach varying depths from the edge of your material. The included punches and dies are replaceable.
Note: As your punch size increases, the thickness of steel these tools can cut decreases.
| Manufacturer Equivalent Number | For Hole Dia. | For Max. Steel Thick. | Punching Force, lbs. | Throat Dp. | Handle Lg. | Ht. | Wd. | Dp. | Material | Each | |
For Use On Aluminum, Brass, Copper, Stainless Steel, Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| XX | 9/32" | 1/8" | 2,000 | 1/4"-3 1/4" | 10 1/4" | 6 1/2" | 1 3/4" | 7" | Steel | 0000000 | 0000000 |
Compact Portable Lever-Operated Hole Punch Sets
About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox. The lever handle provides extra punching force to quickly punch through metal. The punches have an adjustable throat to reach varying depths from the edge of your material. Switch out the included punch and die to create holes of different sizes.
Note: As your punch size increases, the thickness of steel these tools can cut decreases.
| Manufacturer Equivalent Number | For Hole Dia. | For Max. Steel Thick. | Punching Force, lbs. | Throat Dp. | Handle Lg. | Ht. | Wd. | Dp. | Material | Includes | Each | |
For Use On Aluminum, Brass, Copper, Stainless Steel, Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 | 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32" | 1/8" | 2,000 | 1/4"-1 3/4" | 8 1/4" | 3 3/4" | 1 1/2" | 4 1/2" | Steel | 7 Punches, 7 Dies | 0000000 | 0000000 |
| XX | 5/32", 7/32", 9/32", 11/32", 13/32", 15/32", 17/32" | 1/8" | 2,000 | 1/4"-3 1/4" | 10 1/4" | 6 1/2" | 1 3/4" | 7" | Steel | 7 Punches, 7 Dies | 0000000 | 000000 |
High-Powered Portable Lever-Operated Hole Punches
Deliver nearly three times the punching force of a standard portable lever-operated punch by holding one handle and turning the other 360°. The included punch and die are replaceable. An optional ratchet handle can be used in tight spots instead of the rotary handle.
Note: As your punch size increases, the thickness of steel this tool can cut decreases.
Smooth-Action Bench-Mount Lever-Operated Hole Punches
Roller bearings in the lever provide low-effort punching. Secure this punch to your workbench and use the lever handle to punch through tough materials. The included punch and die are replaceable. Punch includes adjustable die holders for punching light-gauge metal.
Note: As your punch size increases, the thickness of steel this tool can cut decreases.
Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Equivalent Number | For Hole Dia. | For Max. Steel Thick. | Punching Force, lbs. | Throat Dp. | Handle Lg. | Ht. | Wd. | Dp. | Material | Fasteners Included | No. of | Dia. | Each | |
For Use On Aluminum, Brass, Copper, Iron, Steel | ||||||||||||||
| 16 | 9/32" | 7/32" | 14,000 | 3 1/4" | 24 1/2" | 9 3/4" | 4" | 8 1/2" | Cast Iron | No | 3 | 7/16" | 0000000 | 0000000 |
| For Manufacturer Equivalent Number | Material | Choose a For Hole Dia. | Each | |
| 16 | Cast Iron | 0000000 | 000000 |
Hammer-Driven Cutting Punches for Grommets
Punch a hole in your material to prepare for the installation of fabric grommets. Strike these tools with a wooden or rawhide mallet.
| For Grommet Trade Size | For Hole Dia. | Material | For Use On | Each | |
| 1 | 9/32" | Steel | Fabric, Leather, Plastic | 0000000 | 000000 |
Hammer-Driven Installation Punches for Grommets with Extended-Neck Washer
These punches set grommets that have an extended-neck washer or an extended-neck tooth lock washer. Strike the punch with a wooden or rawhide mallet. Punch and die are stamped with the corresponding grommet trade size.
| For Grommet Trade Size | For Hole Dia. | Each | |
| 0 | 9/32" | 0000000 | 000000 |
Hammer-Driven Installation Punches for Grommets
These punches set grommets that have a standard washer or a tooth lock washer. Strike the punch with a wooden or rawhide mallet. Punch and die are stamped with the corresponding grommet trade size.
| For Grommet Trade Size | For Hole Dia. | Each | |
| 1 | 9/32" | 0000000 | 000000 |