Hole Saws For Plaster | McMaster-Carr

Filter by

System of Measurement

Diameter

For Use On

Tooth Material

For Use With

Cutting Depth

Material

For Arbor Thread Size

1/2"-20

5/8"-18

Body Material

Steel

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

RoHS

REACH

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Performance

Shank Diameter

Arbor Hole

Pipe Size

Thread Size

Conduit Trade Size

Copper Tube Size

For Pipe Tap Size

Arbor Size

Pilot Drill Length

Shield Diameter

54 Products

Long-Life Fast-Cut Hole Saws for Wood and Plastic


	Arbor with Pilot Drill	Quick-Change Arbor with Pilot Drill Bit	Replacement Pilot Drill Bit

Cut holes in wood and plastic five times faster than standard hole saws and with fewer blade changes. The teeth on these saws are shaped to power through not only wood, particleboard, and plastic but also drywall, plaster, and even masonry. Made of carbide, the teeth are the hardest in our hole saw offering, so they stay sharp up to twice as long as high-speed steel teeth.

To attach these saws to a drill or drill press, you'll need an arbor with a pilot drill bit (sold separately). If you're using an arbor you already have, make sure the pilot drill bit is at least 3 _5/8" long.

Quick-change arbors don’t require an L-key or screwdriver to swap out a dull pilot drill bit—just pull back on the release collar.

	Hole Saws						Arbors with Pilot Drill Bit with 1/4" Hex Shank			Arbors with Pilot Drill Bit with 11/32" Hex Shank			Quick-Change Arbors with Pilot Drill Bit with Hex Shank				Replacement Pilot Drill Bits for 1/4" & 11/32" Hex Shank
			Material
	Dia.	For Arbor Thread Size	Body	Tooth		Each	For Arbor Hole Thread Size		Each	For Arbor Hole Thread Size		Each	Shank Size	For Arbor Hole Thread Size		Each		Each
For Ceramic, Drywall, Fiberglass, Masonry, Plaster, Plastic, and Wood







				2 1/8" Cutting Depth

				3/4"	1/2"-20	Steel	Carbide	6049N11	000000	1/2"-20	4066A203	000000	1/2"-20	4066A204	000000	3/8"	1/2"-20	4043A51	000000	4066A201	00000


				25/32"	1/2"-20	Steel	Carbide	6049N12	00000	1/2"-20	4066A203	00000	1/2"-20	4066A204	00000	3/8"	1/2"-20	4043A51	00000	4066A201	0000
				7/8"	1/2"-20	Steel	Carbide	6049N13	00000	1/2"-20	4066A203	00000	1/2"-20	4066A204	00000	3/8"	1/2"-20	4043A51	00000	4066A201	0000
				1"	1/2"-20	Steel	Carbide	6049N14	00000	1/2"-20	4066A203	00000	1/2"-20	4066A204	00000	3/8"	1/2"-20	4043A51	00000	4066A201	0000
				1 1/16"	1/2"-20	Steel	Carbide	6049N15	00000	1/2"-20	4066A203	00000	1/2"-20	4066A204	00000	3/8"	1/2"-20	4043A51	00000	4066A201	0000
				1 1/8"	1/2"-20	Steel	Carbide	6049N16	00000	1/2"-20	4066A203	00000	1/2"-20	4066A204	00000	3/8"	1/2"-20	4043A51	00000	4066A201	0000
				1 3/16"	1/2"-20	Steel	Carbide	6049N17	00000	1/2"-20	4066A203	00000	1/2"-20	4066A204	00000	3/8"	1/2"-20	4043A51	00000	4066A201	0000
				1 1/4"	1/2"-20	Steel	Carbide	6049N18	00000	1/2"-20	4066A203	00000	1/2"-20	4066A204	00000	3/8"	1/2"-20	4043A51	00000	4066A201	0000
				1 3/8"	5/8"-18	Steel	Carbide	6049N19	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				1 1/2"	5/8"-18	Steel	Carbide	6049N21	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				1 9/16"	5/8"-18	Steel	Carbide	6049N22	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000


				1 5/8"	5/8"-18	Steel	Carbide	6049N23	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				1 3/4"	5/8"-18	Steel	Carbide	6049N24	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				1 7/8"	5/8"-18	Steel	Carbide	6049N25	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				2"	5/8"-18	Steel	Carbide	6049N26	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				2 1/8"	5/8"-18	Steel	Carbide	6049N27	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				2 1/4"	5/8"-18	Steel	Carbide	6049N28	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				2 3/8"	5/8"-18	Steel	Carbide	6049N29	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				2 1/2"	5/8"-18	Steel	Carbide	6049N31	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				2 9/16"	5/8"-18	Steel	Carbide	6049N32	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				2 5/8"	5/8"-18	Steel	Carbide	6049N33	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000


				2 3/4"	5/8"-18	Steel	Carbide	6049N34	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				2 7/8"	5/8"-18	Steel	Carbide	6049N35	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				3"	5/8"-18	Steel	Carbide	6049N36	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				3 1/8"	5/8"-18	Steel	Carbide	6049N37	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				3 1/4"	5/8"-18	Steel	Carbide	6049N38	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				3 3/8"	5/8"-18	Steel	Carbide	6049N39	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				3 1/2"	5/8"-18	Steel	Carbide	6049N41	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				3 5/8"	5/8"-18	Steel	Carbide	6049N42	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				3 3/4"	5/8"-18	Steel	Carbide	6049N43	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				3 7/8"	5/8"-18	Steel	Carbide	6049N44	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000


				4"	5/8"-18	Steel	Carbide	6049N45	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				4 1/8"	5/8"-18	Steel	Carbide	6049N46	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				4 1/4"	5/8"-18	Steel	Carbide	6049N47	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				4 5/16"	5/8"-18	Steel	Carbide	6049N48	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				4 3/8"	5/8"-18	Steel	Carbide	6049N49	00000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				4 1/2"	5/8"-18	Steel	Carbide	6049N51	000000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				4 5/8"	5/8"-18	Steel	Carbide	6049N52	000000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				4 3/4"	5/8"-18	Steel	Carbide	6049N53	000000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				5"	5/8"-18	Steel	Carbide	6049N54	000000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				5 1/2"	5/8"-18	Steel	Carbide	6049N55	000000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000


				6"	5/8"-18	Steel	Carbide	6049N56	000000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000
				6 1/4"	5/8"-18	Steel	Carbide	6049N57	000000	—	———	0	5/8"-18	4066A206	00000	1/2"	5/8"-18	4043A53	00000	4066A201	0000

Adjustable-Diameter Hole Saws with Debris Guard

Hole Saw in Use

Image of Product. Front orientation. Hole Saws. Adjustable-Diameter Hole Saws with Debris Guard.

Replacement Blades

Cut a variety of hole sizes in ceilings, walls, floors, and other surfaces without all the mess. These hole saws have two adjustable blades that bite into drywall, plaster, plastic and wood to make larger holes than a drill bit alone. They also have a clear debris shield to catch flying chips and collect dust. The shield’s rubber seal maintains contact with the surface you’re cutting, which keeps the debris contained and prevents damage to surrounding material. Use these hole saws to make perfectly round holes to install a range of cylindrical items from cables to doorknobs to recessed lighting. Power them using a drill press or portable drill.

Vacuum Port—Hole saws with a vacuum port on the debris shield can connect to a vacuum hose to suck up debris as you cut, making cleanup even easier.

	Hole Saws															Replacement Blades
					Pilot Drill			Shield
	Dia.	Arbor Size	Arbor Shank Shape	Body Material	Dia.	Lg.	Material	Dia.	Material	Blade Material	Features	For Vacuum Hose Dia.	Includes		Each	Pkg. Qty.		Pkg.
For Drywall, Plaster, Plastic, and Wood







				1 1/16" Cutting Depth

				2 13/64" to 8 19/32"	3/8"	Hex	Steel	15/64"	2 3/16"	High-Speed Steel	9 1/2"	Polycarbonate	Carbon Steel	Built-In Arbor, Clear Debris Shield with Rubber Seal, Vacuum Port	2 1/2"	Blades Hex Nuts Pilot Drill Spring	5457N141	0000000	2	5457N142	000000


				2 13/64" to 10"	3/8"	Hex	Steel	15/64"	1 11/16"	High-Speed Steel	11 3/4"	Polycarbonate	Carbon Steel	Built-In Arbor, Clear Debris Shield with Rubber Seal	—	Blades Hex Nuts Pilot Drill Spring	5457N111	000000	2	5457N112	00000

Spiral Saw Bits for Plaster, Cement, and Stucco

Shank Dia.	Material		Each
1/4"	Carbide-Tipped Steel	3979A38	000000