Anodized Hooks | McMaster-Carr

Filter by

Material

Color

System of Measurement

Weight Capacity

Opening Width

Inside Length

Thickness

Latch Type

Fitting Type

Open Latch Position

Locking Latch Type

Application

Attachment Type

Hook Opening Width

Usable Length

End Type

Narrow End Inside Width

Hook Type

Mount Type

Inside Width

Thread Size

RoHS

REACH

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Forward

How can we improve?

39 Products

Twist-Locking-Latch Carabiners—Not for Lifting


Style 1	Style 2	Style 5	Style 6

Style 11	Style 12	Style 13	Style 14

Style 15	Style 16	Style 17

Straight

Open

Latch

Position

Offset

Open

Latch

Position

Hold rope more securely than nonlocking and slide-locking-latch carabiners. While these carabiners are not as secure as screw-locking-latch carabiners, they are easier to open.

Twist 90°/Push In—Twist 90°/push in carabiners are easy to open with one hand.

Pull Down/Twist 90°/Push In and Lift Up/Twist 90°/Push In—Pull down/twist 90°/push in and lift up/twist 90°/push in carabiners are more secure than twist 90°/push in because they require an extra step to open.

Anodized Steel—Anodized steel carabiners offer excellent corrosion resistance.

Anodized Aluminum—Anodized aluminum carabiners offer excellent corrosion resistance. They're also more lightweight than zinc-plated steel carabiners.

Style 2—Style 2 carabiners have a spring-loaded wire to keep rope secured to one end, preventing it from sliding or moving. Lift the wire to release the rope. When you let go, the wire springs back into place.

Styles 11-13—Styles 3 and 7-13 have either a removable eye pin or eyelet that secures rope to one end of the carabiner to prevent it from sliding or moving.

Offset Open Latch Position—Carabiners with an offset latch position open to the side, giving you more space to attach large items.

With Locking Indicator—Carabiners with a locking indicator have a symbol that is shown when the carabiner is fully locked.

ANSI/ASSP Z359.12—Carabiners that meet ANSI/ASSP Z359.12 have been tested for use in fall protection systems.

Unlocked Setting—Some carabiners have an unlocked setting, making it easy to add your rope or strap. Lift up the latch then twist it. It will remain unlocked until you push in the latch. Once the latch is pushed in, it springs back and locks into place.

	Opening Wd.	Inside Lg.	Narrow End Inside Wd.	Open Latch Position	Locking Indicator	Color	Specs. Met	Certification	Features		Each
Twist 90°/Push In







	Anodized Aluminum

	1	6,500	1/2"	1"	3 1/2"	1 1/4"	Offset	Yes	Red	—	—	—	0000000	000000


	Pull Down/Twist 90°/Push In







					Anodized Aluminum

					2	5,300	3/8"	15/16"	3 1/2"	1 7/16"	Offset	Yes	Purple	—	CE Marked	—	0000000	00000


					2	5,800	1/2"	1"	3 5/16"	1 3/32"	Straight	Yes	Orange	—	CE Marked	—	0000000	00000


					Lift Up/Twist 90°/Push In







									Anodized Steel

									6	9,200	7/16"	13/16"	3 1/2"	1 1/8"	Straight	No	Black	—	—	—	00000000	00000




											Anodized Aluminum

											5	5,800	1/2"	1"	3 5/16"	1 1/16"	Offset	Yes	Orange	—	CE Marked	Unlocked Setting	0000000	00000


											5	6,500	1/2"	1"	3 1/2"	1 1/4"	Offset	Yes	Red	—	CE Marked	Unlocked Setting	0000000	00000
											11	6,700	11/16"	2"	7 3/4"	31/32"	Straight	No	Black	—	—	—	0000000	00000
											12	5,000	1/2"	7/8"	3 3/4"	1"	Straight	No	—	ANSI/ASSP Z359.12	—	—	0000000	00000
											12	5,000	11/16"	2"	8"	7/8"	Straight	No	—	ANSI/ASSP Z359.12	—	—	0000000	000000
											13	5,700	1/2"	7/8"	3 3/8"	1 3/8"	Straight	No	Black	—	CE Marked	—	00000000	00000
											13	5,700	1/2"	7/8"	3 3/8"	1 3/8"	Straight	No	Gold	—	CE Marked	—	00000000	00000
											14	5,700	1/2"	7/8"	3 3/8"	1 3/8"	Straight	No	Black	—	CE Marked	—	00000000	00000
											14	5,700	1/2"	7/8"	3 3/8"	1 3/8"	Straight	No	Gold	—	CE Marked	—	00000000	00000
											15	5,300	7/16"	15/16"	3 1/2"	1 7/16"	Offset	Yes	Purple	—	CE Marked	Unlocked Setting	0000000	00000
											16	6,100	1/2"	7/8"	3 1/8"	15/16"	Straight	No	Gold	—	CE Marked	—	0000000	00000


											17	5,000	1/2"	13/16"	3 1/2"	7/8"	Straight	No	—	ANSI/ASSP Z359.12	—	—	0000000	00000

Rope Hooks

Style A

Style B

The base of these hooks grip rope.

Warning: Never use for lifting applications.

Style B—Styles B and C have a lever for quick adjustments.

				Hook
	Style	For Rope Dia.	Wt. Cap., lb.	Opening Wd.	Lg.	Color	Pkg. Qty.		Pkg.
Latching Hooks







				Anodized Aluminum

				A	1/16" to 3/16"	50	3/8"	2 1/16"	Black	1	0000000	00000


				A	1/8" to 3/8"	150	3/4"	3 11/16"	Black	1	0000000	0000
				B	1/16" to 3/16"	280	1/2"	1 5/8"	Black	1	0000000	00000
				B	1/8" to 3/8"	500	15/16"	2 7/8"	Black	1	0000000	00000

Carabiners—Not for Lifting


Style 6	Style 7		Straight Open Latch Position

Quickly connect and disconnect these carabiners—they don’t lock.

Anodized Aluminum—Anodized aluminum carabiners offer excellent corrosion resistance. They're also more lightweight than zinc-plated steel carabiners.

Opening Wd.	Inside Lg.	Narrow End Inside Wd.	Open Latch Position	Color		Each







Anodized Aluminum

6	400	7/16"	3/4"	3 1/16"	1 1/16"	Straight	Gold	00000000	00000


7	400	3/8"	5/8"	3 3/4"	1 1/4"	Straight	Black	00000000	0000

S-Hooks with Latches on Both Ends—Not for Lifting

The spring-loaded latches on these hooks snap back into place, securing your load.

Straight Profile with Rounded Hook

Spring Latch

Anodized Aluminum—Anodized aluminum hooks have colorful finishes to easily identify different loads and won’t rust in damp or humid environments.

								Each
	Wt. Cap.	Thk.	Hook Opening Wd.	Usable Lg.	Inside Wd.	Choose a Color		1-49	50-199	200-Up
Spring Latch







				Anodized Aluminum

				Not Rated	3/16"	9/16"	2 5/16"	13/16"	Blue , Green , Orange	0000000	00000	00000	00000


				Not Rated	1/4"	3/4"	3"	1"	Blue , Green , Orange	0000000	0000	0000	0000

Twist-Locking-Latch Carabiners with Swivel—Not for Lifting


Ball Bearing Swivels	Swivels without Ball Bearings

Prevent twisting in your rope or line with these swiveling carabiners. To open, pull the latch down, twist 90° and push in.

Anodized Aluminum—Anodized aluminum carabiners offer excellent corrosion resistance. They're also more lightweight than zinc-plated steel carabiners.

Ball Bearing Swivels—Carabiners with ball bearing swivels rotate freely under loads.

Swivels without Ball Bearings—Carabiners without ball bearings swivel with a bushing to rotate before a load is applied. There is a carabiner on both sides of the swivel, so you can attach multiple items in different orientations.

With Locking Indicator—These carabiners have a symbol that is exposed when the carabiner is fully locked and covered when it is unlocked.

	Opening Wd.	Inside Lg.	Narrow End Inside Wd.	Overall Lg.	Eye ID	Open Latch Position	Locking Indicator	Color		Each
Pull Down/Twist 90°/Push In







	Anodized Aluminum

	With Ball Bearings	6,700	7/16"	13/16"	2 15/16"	3/16"	5 3/8"	1"	Straight	Yes	Black	0000000	0000000


	Without Ball Bearings	6,700	7/16"	13/16"	2 15/16"	3/16"	7 3/8"	—	Straight	Yes	Black	0000000	000000

Screw-Locking-Latch Carabiners—Not for Lifting


Style 2	Style 3	Style 4	Style 5		Offset Open Latch Position

The most secure carabiner we offer, these carabiners won’t accidentally open when rope slides because you need to unscrew the latch to unlock them.

Anodized Aluminum—Anodized aluminum carabiners offer excellent corrosion resistance. They're also more lightweight than zinc-plated steel carabiners.

Style 5—Style 5 carabiners have a spring-loaded wire to keep rope secured to one end. Lift the wire to release the rope. When you let go, the wire springs back into place.

Offset Open Latch Position—Carabiners with an offset latch position open to the side, giving you more space to attach large items.

With Locking Indicator—Carabiners with a locking indicator have a symbol that is covered when the carabiner is fully locked and exposed when it is not.

Opening Wd.	Inside Lg.	Narrow End Inside Wd.	Open Latch Position	Locking Indicator	Color		Each







Anodized Aluminum

2	6,500	1/2"	1"	3 1/2"	1 5/16"	Offset	Yes	Red	0000000	000000


3	5,300	7/16"	1"	3 1/2"	1 7/16"	Offset	Yes	Black	0000000	00000
4	5,800	1/2"	1"	3 5/16"	1 3/16"	Offset	Yes	Orange	0000000	00000
5	5,800	1/2"	1"	3 5/16"	1"	Offset	Yes	Orange	0000000	00000

Railing Clamps

Style A

Style B

Style D

Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment. Made of aluminum, all of these clamps are lightweight and have good corrosion resistance.

Black Anodized Aluminum—Clamps with a black anodized finish blend into dark backgrounds and are more corrosion resistant than unfinished clamps.

Style A—Style A clamps have grooves on the inside to improve grip. To mount equipment, remove the bolt on the bottom of the hanger, mount the equipment, and reattach the bolt. To hang threaded rod, remove the bolt and replace it with threaded rod.

Style B—Style B clamps have a T-handle for attachment and removal. To mount equipment, remove the bolt on the bottom of the hanger, mount the equipment, and reattach the bolt. To hang threaded rod, remove the bolt and replace it with threaded rod.

Style D—Style D clamps have a wing nut and a bolt for making adjustments. To mount equipment, remove the bolt on the bottom of the hanger, mount the equipment, and reattach the bolt. To hang threaded rod, remove the bolt and replace it with threaded rod.

		For OD
	Style	Inch	Metric, mm	For Pipe Size	For Thread Size	Bolt Material	Wt. Cap., lb.	Mount Type	Lg.	Wd.	Ht.		Each
Black Anodized Aluminum



		A	11/16" to 1 5/16"	17 to 33	3/8, 1/2, 3/4, 1	5/16"-18	Zinc-Plated Steel	125	Clamp On	2 1/2"	5/8"	3 7/8"	00000000	000000


		A	11/16" to 1 5/16"	17 to 33	3/8, 1/2, 3/4, 1	5/16"-18	18-8 Stainless Steel	125	Clamp On	2 1/2"	5/8"	3 7/8"	000000000	00000
		A	1 5/16" to 2 3/8"	33 to 60	1, 1 1/4, 1 1/2, 2	1/2"-13	Zinc-Plated Steel	600	Clamp On	3 7/8"	1"	6 3/8"	00000000	00000
		A	1 5/16" to 2 3/8"	33 to 60	1, 1 1/4, 1 1/2, 2	1/2"-13	18-8 Stainless Steel	600	Clamp On	3 7/8"	1"	6 3/8"	00000000	00000
		B	1 7/8" to 2"	48 to 51	1 1/2	1/2"-13	Zinc-Plated Steel	1,100	Clamp On	6"	2"	4 3/8"	000000000	00000
		B	1 7/8" to 2"	48 to 51	1 1/2	1/2"-13	18-8 Stainless Steel	1,100	Clamp On	6"	2"	4 3/8"	000000000	00000
		D	1 11/16" to 1 7/8"	43 to 48	1 1/4, 1 1/2	1/2"-13	Zinc-Plated Steel	1,100	Clamp On	4 1/4"	2"	5 3/4"	000000000	00000

Suction Cup-Mount Tool Holders

Style A

Designed for temporary mounting on smooth, nonporous surfaces, these suction cup-mount holders are easy to remove and reposition.

Style A—Pair Style A with the 40 mm long optional threaded rod, or create a custom holder. These mounts have an unthreaded through hole that can be tapped to your desired thread size.

		Overall
	Style	Wd.	Ht.	Dp.	Wt. Cap.	Material	Cup Material		Each
Wall Mount, Under Mount



		A	4 3/4"	4 3/4"	2"	Not Rated	Black Anodized Aluminum	Black Rubber	000000	000000

Threaded Rods