About Conduit
More
About Metal Tubing
More
Smooth-Bore Seamless Stainless Steel Tubing
Seamless construction with no weld bead gives this tubing an interior with unrestricted flow. It is stronger than welded tubing and can be flared without splitting.
304 stainless steel has very good corrosion resistance.
316 stainless steel offers excellent corrosion resistance.
Tubing that meets ASTM specifications adheres to international standards for dimensions and materials.
For technical drawings and 3-D models, click on a part number.
- Temperature Range:
304 Stainless Steel: -425° to 1500° F
316 Stainless Steel: -325° to 1500° F - Bending Method: Tube Bender
- For Use With: Natural Gas, Water, Oil, Air
- Compatible Tubing Fittings: Butt Weld, Compression, Flared, and Yor-Lok
Welded Stainless Steel Tubing
When your application does not require a smooth interior, this tubing is an economical choice. It has a weld bead on the inside.
304 stainless steel has very good corrosion resistance.
316 stainless steel offers excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: 304 Stainless Steel: -420° to 1500° F
316 Stainless Steel: -320° to 1500° F - Bending Method: Tube Bender
- Compatible Tube Fittings: See table
| OD | Wall Thickness | ID | Maximum Pressure | Temper Rating | Compatible Tube Fittings | 1 ft. | 3 ft. | 6 ft. | |
304 Stainless Steel—For Use With Air, Deionized Water, Hydraulic Fluid, Natural Gas, Oil, Water | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/4" | 0.035" | 0.68" | 1,500 psi @ 72° F | Soft | Butt Weld, Compression | 00000000 | |||
316 Stainless Steel—For Use With Air, Deionized Water, Hydraulic Fluid, Natural Gas, Oil, Water | |||||||||
| 3/4" | 0.035" | 0.68" | 1,500 psi @ 72° F | Soft | Butt Weld, Compression | 000000000 | |||
- Temperature Range: 304 Stainless Steel: -420° to 1500° F
316 Stainless Steel: -320° to 1500° F - Bending Method: Tube Bender
- Compatible Tube Fittings: Butt Weld and Compression
Mil. Spec. Stainless Steel Tubing
- Temperature Range: -420° to 1500° F
- Bending Method: Tube Bender
- Compatible Tube Fittings: Butt Weld, Compression, Flared, Yor-Lok
A titanium additive gives this tubing excellent strength and superior corrosion resistance. It is seamless, which provides a smooth interior for unrestricted flow. It is stronger than welded tubing and can be flared without splitting.
For technical drawings and 3-D models, click on a part number.
Cleaned and Capped Stainless Steel Tubing
- Temperature Range: -320° to 1500° F
- Bending Method: Tube Bender
- Compatible Tube Fittings: Butt Weld, Compression, and Flared
This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside. It is seamless, which provides a smooth interior for unrestricted flow. It is stronger than welded tubing and can be flared without splitting. Tubing has excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
General Purpose Aluminum Tubing
- Temperature Range: -450° to 400° F
- Bending Method: Tube Bender
- Compatible Tube Fittings: Flared
This tubing is lightweight with good corrosion resistance and weldability. It has magnesium and silicon added for strength. Tubing is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting.
For technical drawings and 3-D models, click on a part number.
Rigid Aluminum Tubing
Unlike other aluminum tubing, this tubing is rigid and will not bend. It contains manganese for good corrosion resistance, strength, and weldability. Tubing connects by welding.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: See Table
- Temper: H14 (1/2 Hard)
- Bendable: No
6" | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | ID | Max. Pressure | Temp. Range, °F | Each | |
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 3/4" | 0.035" | 0.68" | 980 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
- Temperature Range: See Table
- Temper: H14 (1/2 Hard)
- Bendable: No
| OD | Wall Thick. | ID | Max. Pressure | Temp. Range, °F | Each | |
1 ft. | ||||||
|---|---|---|---|---|---|---|
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 3/4" | 0.035" | 0.68" | 190 psi @ 72° F | -110° to 300° | 00000000 | 000000 |
2 ft. | ||||||
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 3/4" | 0.035" | 0.68" | 980 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
3 ft. | ||||||
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 3/4" | 0.035" | 0.68" | 190 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
6 ft. | ||||||
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 3/4" | 0.035" | 0.68" | 190 psi @ 72° F | -110° to 300° | 00000000 | 00000 |
Ultra-Corrosion-Resistant Aluminum Tubing
- Temperature Range: -450° to 400° F
- Bending Method: Tube Bender
- Compatible Tube Fittings: Flared
Commonly used in marine applications, this tubing contains magnesium for excellent corrosion resistance. It is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting.
For technical drawings and 3-D models, click on a part number.
Mil. Spec. Aluminum Tubing
- Temperature Range: -450° to 400° F
- Bending Method: Tube Bender
- Compatible Tube Fittings: Flared
This tubing meets MIL-T-7081 standards. It has magnesium and silicon added for strength and is lightweight with good corrosion resistance and weldability. Tubing is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting.
For technical drawings and 3-D models, click on a part number.
Cleaned and Capped Copper Tubing
- Temperature Range: 32° to 400° F
- Bending Method: Tube Bender
- Compatible Tube Fittings: Compression and Solder Connect
This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside. It is also known as refrigeration and air conditioning tubing. Tubing has good corrosion resistance and excellent heat transfer qualities. It is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting.
Note: Copper tube size is an accepted industry designation, not an actual size.
For technical drawings and 3-D models, click on a part number.
Welded Steel Tubing
- Temperature Range: -65° to 800° F
- Bending Method: Tube Bender
A strong, high-pressure alternative to seamless tubing, this tubing is also known as DOM (drawn over mandrel). It is welded with a smoothed weld bead on the inside to reduce particle buildup. Tubing connects by welding. Do not use in corrosive environments.
For technical drawings and 3-D models, click on a part number.
High-Pressure Smooth-Bore Seamless Titanium Tubing
- Temperature Range: -20° to 600° F
- Bending Method: Tube Bender
Seamless construction with no weld bead gives this tubing a smooth interior for unrestricted flow. It is stronger than welded tubing and can be flared without splitting. Tubing is lightweight with excellent corrosion resistance. It connects by welding.
For technical drawings and 3-D models, click on a part number.
Medium-Wall (IMC) Steel Conduit
For technical drawings and 3-D models, click on a part number.
Also known as intermediate metallic conduit (IMC), this conduit is lightweight and strong. A smooth coating protects wire and cable from abrasion when being pulled. This conduit has one threaded male end; the other end has a threaded female connector.
5-ft. lengths can be shipped via small-parcel carrier.
Attach medium-wall (IMC) and thick-wall (rigid) steel conduit to a knockout in an outlet box or enclosure.
NPT female × NPSM male straight adapters are also known as hubs. They have an insulated throat to protect wire and cable from abrasion when being pulled. Use in wet or dry locations.
Conduit Connection | Electrical Box Connection | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size  | Pipe Size | Thread Type | Gender | Thread Type | Pipe Size | Gender | Material | Includes | Electrical Connector Component | Each | |
| 1/2 | 1/2 | NPT | Female | NPSM | 1/2 | Male | Zinc | Locknut | Adapter | 0000000 | 00000 |
Attach medium-wall (IMC) and thick-wall (rigid) steel conduit to a knockout in an outlet box or enclosure.
NPSM male × flanged end male straight adapters are also known as conduit nipples, chase nipples, and box adapters. The flange installs through a knockout from inside an outlet box or enclosure. Use with a locknut (not included) to create a short raceway between boxes or enclosures.
Conduit Connection | Electrical Box Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Pipe Size | Thread Type | Gender | For Knockout Trade Size | Gender | Lg. | Material | Electrical Connector Component | Each | |
| 1/2 | 1/2 | NPSM | Male | 1/2 | Male | 5/8" | Zinc | Adapter | 0000000 | 00000 |
Attach medium-wall (IMC) and thick-wall (rigid) steel conduit to a knockout in an outlet box or enclosure.
Compression female × NPSM male straight adapters offer a reliable hold on conduit.
Conduit Connection | Electrical Box Connection | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Gender | Pipe Size | Thread Type | Gender | Material | Includes | Electrical Connector Component | Each | |
| 1/2 | Female | 1/2 | NPSM | Male | Zinc-Plated Steel | Locknut | Adapter | 0000000 | 00000 |
Attach medium-wall (IMC) and thick-wall (rigid) steel conduit to a knockout in an outlet box or enclosure.
NPSM female × NPSM male 90° elbow adapters are for tight spaces where conduit can't be bent.
Conduit Connection | Electrical Box Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Material | Electrical Connector Component | Each | |
| 1/2 | 1/2 | NPSM | Female | 1/2 | NPSM | Male | Iron | Adapter | 0000000 | 00000 |
Join pieces of medium-wall (IMC) and thick-wall (rigid) conduit.
Compression female straight connectors join two pieces of unthreaded conduit. Push the conduit into the ends; tighten the compression rings to secure.
Conduit Connection | ||||
|---|---|---|---|---|
| Conduit Trade Size | Gender | Material | Each | |
| 1/2 | Female | Zinc-Plated Steel | 0000000 | 00000 |
Join pieces of medium-wall (IMC) and thick-wall (rigid) conduit.
Screw-clamp ends tighten around conduit with screws.
Conduit Connection | |||||
|---|---|---|---|---|---|
| Conduit Trade Size | Gender | Material | Specifications Met | Each | |
Connector | |||||
| 1/2 | Female | Zinc-Plated Steel | UL Listed | 0000000 | 000000 |
Join pieces of medium-wall (IMC) and thick-wall (rigid) conduit.
NPT female straight connectors with glide insert have three pieces. The two outer pieces turn independently so you don't need to rotate the conduit.
Join pieces of medium-wall (IMC) and thick-wall (rigid) conduit.
Fully threaded male and male with threaded ends are also known as nipple extensions. They extend the length of conduit or connect two outlet boxes or enclosures.
Join pieces of medium-wall (IMC) and thick-wall (rigid) conduit.
NPSM female 90° elbow connectors with removable cover allow for quick access to pull wire and cable.
Join pieces of medium-wall (IMC) and thick-wall (rigid) conduit.
Offset elbow connectors join knockouts on outlet boxes or enclosures that do not align.
Conduit or Electrical Box Connection | |||||||
|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Pipe Size | Thread Type | Gender | Offset Lg. | Material | Each | |
| 1/2 | 1/2 | NPSM | Male | 3/4" | Zinc | 0000000 | 00000 |
Connect to the end of conduit or a fitting to protect wire and cable from abrasion when being pulled. Use with medium-wall (IMC) and thick-wall (rigid) steel conduit.
Conduit Connection | |||||||
|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Pipe Size | Thread Type | Gender | Material | Color | Each | |
| 1/2 | 1/2 | NPSM | Female | Polypropylene | Gray | 00000000 | 00000 |
Join two different sizes of threaded conduit. Use with medium-wall (IMC) and thick-wall (rigid) steel conduit.
Conduit Connection | ||||||
|---|---|---|---|---|---|---|
| Conduit Trade Size | Pipe Size | Thread Type | Gender | Material | Each | |
| 3/4 × 1/2 | 3/4 × 1/2 | NPSM | Male × Female | Zinc-Plated Steel | 0000000 | 00000 |
| 1 × 1/2 | 1 × 1/2 | NPSM | Male × Female | Zinc-Plated Steel | 0000000 | 0000 |
| 1 1/4 × 1/2 | 1 1/4 × 1/2 | NPSM | Male × Female | Zinc-Plated Steel | 0000000 | 0000 |
| 2 × 1/2 | 2 × 1/2 | NPSM | Male × Female | Zinc-Plated Steel | 0000000 | 00000 |
Ground conduit by running a ground wire through the attached lug. The included grommet protects wire and cable from abrasion when being pulled. Use with medium-wall (IMC) and thick-wall (rigid) steel conduit.
| Conduit Trade Size | Pipe Size | Thread Type | Gender | Material | Compatible With | Each | |
Grounding Clamp | |||||||
|---|---|---|---|---|---|---|---|
| 1/2 | 1/2 | NPSM | Female | Zinc | Aluminum Wire, Copper Wire | 00000000 | 000000 |
Reduce the knockout size in an outlet box or enclosure so you can attach a different size of medium-wall (IMC) and thick-wall (rigid) steel conduit to it. Two reducing washers are required per knockout.
