Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. Access the wire connection by opening the hinged housing. Also known as hospital-grade plugs, these have an extra-tight fit when mated with sockets or receptacles to remain secure in high-vibration environments. The housing is impact-resistant plastic.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Visually confirm these plugs have power; they have an indicating light that is visible from any angle. Also known as hospital-grade plugs, they have an extra-tight fit when mated with sockets or receptacles to remain secure in high-vibration environments. The housing is impact-resistant plastic.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Add a fuse to protect equipment from current overload. If the current exceeds the fuse rating, the fuse breaks the circuit. Fuse is sold separately. Plugs have an extra-tight fit when mated with sockets or receptacles to remain secure in high-vibration environments. Also known as hospital-grade plugs.

For technical drawings and 3-D models, click on a part number.

Keep personnel safe from electric shock by adding ground fault protection. Also known as hospital-grade receptacles, these have an extra-tight fit when mated with plugs to remain secure in high-vibration environments.

For technical drawings and 3-D models, click on a part number.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage. An isolated ground connection blocks EMI. The indicating light turns green when receptacles have power and are protected. A flashing red light and an audible alarm indicate power but no surge protection. When mated with a plug, receptacles provide an extra-tight fit to remain secure in high-vibration applications. Also known as hospital-grade receptacles. They fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Prevent damage to electronic equipment caused by spikes in voltage. An indicating light turns green when receptacles have power and are protected. A flashing red light and an audible alarm indicate power but no surge protection. Receptacles provide an extra-tight fit when mated with a plug to remain secure in high-vibration environments. They're also known as hospital-grade receptacles. All fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot. Use them with computers, lab equipment, and office machines that have IEC connections.

Cords with a 90° elbow socket fit flush against equipment, so equipment can be pushed against a wall.

Tug these cords to full length, and they’ll stay plugged in. Also called hospital-grade cords, they form an extra-tight connection with outlets. After stretching, they return to a tight, tangle-free coil. Use them for computers, lab equipment, and other machines that have IEC connections. They'll stand up to damp environments thanks to their insulation, which is designated as SJT. The plug is marked with a green dot, indicating it is hospital-grade.

Create a secure, vibration-resistant connection on both ends—these cords have a hospital-grade plug and a locking connector on the socket. The plug has an extra-tight connection to stay plugged into your electrical outlet. A lock on the socket flips over the male receptacle on your equipment. The lock will keep the connection in place until it is manually unlocked. Designated SJT, these cords are safe to use in dry or damp locations. Use with computers, lab equipment, and other machines with IEC connections. The plug is marked with a green dot, indicating it is hospital-grade.

For technical drawings and 3-D models, click on a part number.

Create secure, vibration-resistant connections on both ends—these cord splitters have a hospital-grade plug and locking sockets. To keep them from detaching, the plug forms an extra-tight connection with outlets. Once they’re locked onto male receptacles, the sockets stay put until you unlock them. The SJTW cord has a water-resistant outer insulation. Use with computers, lab equipment, and office machines that have IEC connections.

For technical drawings and 3-D models, click on a part number.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

The plug and outlets on these reels form an extra-tight connection with any device to keep it from detaching. They’re marked with a green dot to confirm that they’re hospital grade. Extend the cord to any length, and a ratchet on the reel will hold it in place. A quick tug on the cord automatically retracts and winds it neatly.

These cord reels have a circuit breaker that trips if there’s too much current, preventing damage to the devices you’re powering. The housing is impact-resistant plastic that won’t dent easily or corrode from humidity. The SJTOW extension cord has insulation that resists oil and water.

For technical drawings and 3-D models, click on a part number.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot. A circuit breaker prevents damage from current overload and short circuits.

Surge suppression outlet strips protect against damage from voltage spikes. The surge rating indicates how much energy the outlet strip can absorb before it needs to be replaced.

Outlet covers protect outlets from dust when not in use.

Fasten mounting clips to a surface and snap the channel on the back of outlet strips into the clips.

Outlets strips with coiled cord can stretch to reach a power source, then return to a tight coil for tangle-free storage.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.