Determine relative humidity within ±4% accuracy and temperature within ±1.8° F accuracy. This meter comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. It also displays dew point or frost point.

Meters measure indoor relative humidity and indoor and outdoor temperatures.

Meters measure indoor relative humidity and indoor and outdoor temperatures.

Check that floors, garments, and other work surfaces won’t discharge static electricity. These laboratory-grade meters are made in the U.S. and certified to NIST standards for accuracy and reliability. They’re essential in server rooms, clean rooms, and other environments where static could harm sensitive electronics. Also known as surface resistance meters, they’re fully compliant with ANSI for testing and validating workplace static control systems.

To prevent static discharge, surface resistance needs to be less than 1×10⁹ ohms. Our meters measure resistance as high as 1×10¹² ohms, with the results clearly displayed on a crisp OLED screen. Readings are exact to two places, with no rounding to the nearest exponent like with less sophisticated meters.

Each meter comes with leads and two 5 lb. probes. Place one probe on a surface to measure the resistance to the ground (Rtg), or place both on a surface to measure the point-to-point resistance between them (Rtt).

Turn the dial to control humidity equipment.

Meters with accuracy certificate come with a document stating they’ve passed a test for accuracy.

No cords or software required—these data recorders store readings on an included SD card in Excel format for easy transfer to a PC.

To ensure reliable readings on the go, this portable meter comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy.

Reduce the humidity in your enclosure to prevent condensation that can cause corrosion and short circuits. These humidistats switch your heater on when the enclosure reaches the relative humidity setting. Once the humidity falls by 5%, the heater switches off. To install, clip humidistats to a DIN rail.

CSA Certified, CSA-US Certified, CE Marked, and VDE Certified, these humidistats meet American, Canadian, and European safety standards. They also meet UL 94 V-0, so if they catch fire, they self-extinguish within 10 seconds and won’t spread the fire by dripping.

Obtain continuous temperature measurements from a wet-bulb and a dry-bulb thermometer to determine relative humidity. This wall-mount humidity meter consists of two mercury-free fluid-filled thermometers, a wick, a glass water bulb, and a relative humidity calculation table.

Also known as sling psychrometers, these calculate relative humidity in the field based on continuous temperature measurements from a wet-bulb and a dry-bulb thermometer. They consist of two mercury-free fluid-filled thermometers, a wick, a glass water bulb, and a handle. These humidity meters have a built-in slide rule for calculating humidity without a calculation table.

These sensors measure temperature and humidity, then send that information to your PLC or controller to regulate heating and cooling equipment, alarms, and data recorders. Choose a sensor that works with your digital IO-Link or analog 4-20 mA system. Clip it to a DIN rail or mount it to a surface, and use the micro M12 plug to connect the sensor to your controller. These sensors are often installed in enclosures.

Sensors meet American, Canadian, and European safety standards. Rated IP20, they’re designed so fingers can’t reach the electrical parts inside and get shocked. They also meet UL 94 V-0, so if they catch fire, they’ll self-extinguish within 10 seconds and won’t spread the fire by dripping.

Keep an eye on leaks, overflow, and temperature changes near your equipment, even when you’re offsite. These detectors connect to your Wi-Fi to send alerts about moisture, temperature, and humidity to your smartphone or tablet. Place them near tanks and tubs to watch for overflow, or near sump pumps and pipe lines to monitor temperatures and prevent frozen pipes. When water touches one of the sensors on the detector, a buzzer also goes off, alerting anyone nearby. Rated IP44, these detectors are protected from objects larger than 1mm, such as wires, and from water splashing in any direction.

Download an app onto your smart device to program temperature and humidity ranges and set up alerts. You can also create reports that show changes in temperature and humidity over time.

To extend the area they monitor, these detectors come with a detachable cable sensor that senses moisture along its entire surface. Swap in replacement cable sensors for worn sensors, or link several together to wrap around large equipment or trace the path of a pipe. Extend them up to 500 feet from detectors.

The probe is attached to a 3-ft. cable for checking humidity, temperature, and dew point in hard-to-reach areas.

Measure temperature, humidity, and radiant heat in your work area to keep your team safe from heat-related hazards. These monitors help you avoid dangerous conditions and comply with OSHA standards for a safe work environment. They use a variety of measurements from your surroundings to calculate the heat stress index and the wet bulb globe temperature (WBGT), which tell you how hot it feels. Set a maximum wet bulb globe temperature, and an alarm will go off when heat reaches the safety limit.

These monitors have two sensors. One measures temperature, humidity, dew point, and wet globe temperature. The other measures black globe temperature, which is the effect of direct solar radiation on an exposed surface. Carry monitors with you to measure different areas, or mount to your tripod to measure conditions over time.

Adapters—Power these monitors with the included batteries, or add a power adapter to plug them in.

Use smartphones and tablets to monitor humidity and temperature within your system or facility. Connect these battery-powered transmitters to your smart device via Bluetooth, and receive data to ensure workplace conditions are suitable for processes, inventory, or personnel. Good for preventative maintenance and route-based monitoring, these transmitters let you choose how frequently you receive the data, and they’ll notify your device when humidity and temperature levels go outside of your thresholds. Download the app, set your parameters, and collect data from up to 300 ft. away. Rated IP65, they are protected against dust and washdowns.

Turn your transmitter into a portable monitoring system by attaching a quick coupling (not included). This allows fast, temporary connections for on-the-go measurements in different locations.

Track ambient temperature and relative humidity over time with this recorder. Recorders come with a replaceable sensor, so no probe is needed.

Remotely record temperature, humidity, and dew point up to 10 feet from the display and set the alarm to sound and flash the display if temperature readings rise above or fall below a set range. This recorder has a remote probe on a 10-ft. cable and a display that can be set to show current temperature, minimum/maximum temperature, or relative humidity and calculated dew point.

Monitor humidity in sealed containers without opening them, protecting the inside from contamination. These plugs are often used on plastic bags, storage containers, and electrical housings. Consisting of a mounting nut and two gaskets for a tight seal, these plugs install through a hole in a flexible barrier. Remove one gasket and reverse the nut to install plugs in a rigid container. Watch the indicator disc through the nut’s viewing window—it will change color as humidity rises and falls. Made of anodized aluminum, these plugs resist corrosion and are lightweight. They meet military and SAE standards for humidity indicators.

Check humidity levels of moisture-sensitive inventory and equipment at a glance. To detect moisture exposure when packaging, shipping, and storing electronics and chemicals, these cards have dots that change color as humidity levels change. Store electronics in a moisture barrier bag with one of these cards and a desiccant bag (bags not included). To revert these cards to their original color, place them in a dry container for 24 hours or bake at 180° F for 3 hours. Cards will not revert to their original color once they reach 60% or greater humidity. They meet industry guidelines for packaging moisture-sensitive devices.