1/2 Pipe Size Hydraulic Reservoirs

Filter by

Capacity

For Use With

Material

Total Number of Ports

Pipe Size

Number of Ports

Hydraulic Tank Type

Maximum Temperature

Connection Port

Overall Height

Oil Outlet Pipe Size

Maximum Pressure

1,000 psi to 1,999 psi

2,000 psi to 2,999 psi

Power

1 hp

2 hp

Dash Size

Bowl Material

Overall Length

Export Control Classification Number (ECCN)

REACH

RoHS

DFARS Specialty Metals

Exempt

Thread Type

NPT

NPTF

UN/UNF (SAE Straight)

Bowl Diameter

Height

Power Source

Gender

Voltage

48 Products

Hydraulic Tanks


Style A	Style B

Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.

Dual Chamber Tanks—Dual chamber tanks have a divider that allows particles to settle on one side before fluid is returned to your line.

			Overall			Drain			Inlet/Outlet			Mounting
	Style	Cap., gal.	Lg.	Wd.	Ht.	Pipe Size	Dash Size	No. of Ports	Pipe Size	Dash Size	No. of Ports	Fasteners Included	No. of Holes	Hole Dia.	Max. Temp., ° F		Each
Steel







				Single Chamber Tanks

				A	1	6"	7 1/2"	12 1/4"	1/2 NPT	08	1	—	—	—	No	4	11/32"	250	0000000	0000000


				A	2	10"	7 1/2"	12 1/4"	1/2 NPT	08	1	1/2 NPT	08	1	No	4	11/32"	250	0000000	000000
				B	2	10 1/8"	10 1/8"	9 1/8"	1/2 NPT	08	1	—	—	—	No	4	7/16"	212	00000000	000000
				B	3	10 1/8"	10 1/8"	13 1/8"	1/2 NPT	08	1	—	—	—	No	4	7/16"	212	00000000	000000
				B	5	10 1/8"	10 1/8"	17 1/8"	1/2 NPT	08	1	—	—	—	No	4	7/16"	212	00000000	000000




						Dual Chamber Tanks

						A	5	16"	10"	14"	1/2 NPT	08	2	1 NPT	16	2	No	4	17/32"	250	0000000	000000


						A	10	20"	12"	17 1/2"	1/2 NPT	08	2	1 NPT	16	2	No	4	17/32"	250	0000000	000000

Accessories and Replacements for Hydraulic Tanks

Pipe Suction Flanges

				Mounting Hole
For Pipe Size	For Cutout Dia.	Material	Mounting Fasteners Included	Ctr.-to-Ctr.	Lg	Wd.	Includes		Each
1/2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	00000000	000000
3/4	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	00000000	00000
1 1/4	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	00000000	00000
1 1/2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	00000000	00000
2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	00000000	00000

Breather Vents

Breather

Vents

Breather vents prevent excess pressure in tanks and allow a free flow of air.

					Cap
Pipe Size	Thread Type	Gender	Material	Removes Particle Size Down To, μm	Dia.	Ht.	Overall Ht.	Hex Wd.		Each



	1/2	NPT	Male	Plastic	40	1 5/8"	3/4"	1 7/8"	1"	00000000	00000


	3/4	NPT	Male	Plastic	40	1 5/8"	3/4"	1 7/8"	1 1/8"	00000000	0000

Flange-Mount Breather Vents

Flange

Mount

Breather vents prevent excess pressure in tanks and allow a free flow of air.

	Material						Strainer			Mounting Hole
For Cutout Dia.	Cap	Strainer	Gasket	Removes Particle Size Down To, μm	Cap Dia.	Flange Dia.	Dia	Ht.	Mounting Fasteners Included	Lg.	Wd.	Bolt Circle Dia.	Mount Type		Each
2 1/8"	Zinc-Plated Steel	Plastic	Rubber	40	3"	3 1/4"	1 7/8"	3 13/16"	Yes	1/4"	3/16"	2 7/8"	Flange	00000000	000000

Level Indicators for Style A Tanks

Through-Wall Mount

Thread
Size	Type	Gender	Connection Ctr.-to-Ctr.	Overall Ht.	Window Ht.	Body Wd.	For Max. Tank Wall Thk.	Max. Pressure @ Temp.	Temp. Range, ° F	Material	Fitting Material	Window Material	Includes		Each
1/2"-20	UNF	Male	5"	6 5/8"	3 1/2"	7/8"	3/4"	290 psi @ 70° F	-40 to 250	Aluminum, Buna-N, Glass	Aluminum	Glass	Mounting Nuts	0000000	000000
1/2"-20	UNF	Male	6"	7 5/8"	4 1/2"	7/8"	3/4"	290 psi @ 70° F	-40 to 250	Aluminum, Buna-N, Glass	Aluminum	Glass	Mounting Nuts	0000000	00000
1/2"-20	UNF	Male	9"	10 5/8"	7 1/2"	7/8"	3/4"	290 psi @ 70° F	-40 to 250	Aluminum, Buna-N, Glass	Aluminum	Glass	Mounting Nuts	0000000	00000

Level and Temperature Indicators for Styles B and C Tanks

Nylon Plastic With

Steel Guard

For Hole
Dia.	No. of Holes	Connection Ctr.-to-Ctr.	Overall Ht.	Window Ht.	Body Wd.	For Max. Tank Wall Thk.	Max. Pressure @ Temp.	Temp. Range, ° F	Thermometer Temp. Measurement Range, ° F	Material	Guard Material	Window Material		Each
1/2"	2	5"	6 3/8"	3 7/8"	13/16"	1/2"	50 psi @ 70° F	-40 to 210	0 to 220	Buna-N, Nylon, Steel	Steel	Nylon	0000000	000000

		Each
Replacement Buna-N Gasket for 62945K11, 62945K12, and 62945K13	00000000	000000

Oil Reservoirs

Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush (each sold separately) to create a dispenser.

140° F Maximum Temperature

Reservoirs with 140° F max. temp. have NPTF (Dryseal) threads, which are compatible with NPT threads. Flow rate depends on temperature.

							For Max. Viscosity
	Cap.	Bowl Dia.	Overall Ht.	Housing Material	Bowl Material	Pressure Regulation Method	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		Each
1/2 NPTF Male Outlet



		12 fl. oz.	3"	6 5/8"	Aluminum	Plastic	Vented	Not Rated	Not Rated	Not Rated	Not Rated	0000000	000000


		16 fl. oz.	3 1/2"	6 5/8"	Aluminum	Plastic	Vented	Not Rated	Not Rated	Not Rated	Not Rated	0000000	00000
		1 qt.	4 1/4"	8 1/16"	Aluminum	Plastic	Vented	Not Rated	Not Rated	Not Rated	Not Rated	0000000	000000
		2 qt.	5 1/2"	10 1/8"	Aluminum	Plastic	Vented	Not Rated	Not Rated	Not Rated	Not Rated	0000000	000000
		1 gal.	5 1/2"	15 1/4"	Aluminum	Plastic	Vented	Not Rated	Not Rated	Not Rated	Not Rated	0000000	000000

225° F Maximum Temperature

						For Max. Viscosity
	Cap.	Bowl Dia.	Overall Ht.	Bowl Material	Pressure Regulation Method	ISO Grade	SAE Grade	SSU Grade, SSU	AGMA Grade		Each
1/2 NPT Male Outlet



		5 fl. oz.	2 7/8"	4 1/2"	Plastic	Vented	150	90	700	4	0000000	000000


		9 fl. oz.	2 7/8"	5 3/4"	Plastic	Vented	150	90	700	4	0000000	00000
		16 fl. oz.	3 5/8"	6 13/16"	Plastic	Vented	150	90	700	4	0000000	00000
		1 qt.	3 5/8"	10 3/16"	Plastic	Vented	150	90	700	4	0000000	00000
		2 qt.	5"	11 1/16"	Plastic	Vented	150	90	700	4	0000000	00000

With Removable Aluminum Filter—225° F Maximum Temperature

Reservoirs with removable filter prevent valve blockage.

						For Max. Viscosity
	Cap.	Bowl Dia.	Overall Ht.	Bowl Material	Pressure Regulation Method	ISO Grade	SAE Grade	SSU Grade, SSU	AGMA Grade	Wire Mesh Material	Removes Particle Size Down To, μm		Each
1/2 NPT Male Outlet



		5 fl. oz.	2 7/8"	4 1/2"	Plastic	Vented	150	90	700	4	304 Stainless Steel	149	0000000	000000


		9 fl. oz.	2 7/8"	5 3/4"	Plastic	Vented	150	90	700	4	304 Stainless Steel	149	0000000	00000
		16 fl. oz.	3 5/8"	6 13/16"	Plastic	Vented	150	90	700	4	304 Stainless Steel	149	0000000	00000
		1 qt.	3 5/8"	10 3/16"	Plastic	Vented	150	90	700	4	304 Stainless Steel	149	0000000	00000
		2 qt.	5"	11 1/16"	Plastic	Vented	150	90	700	4	304 Stainless Steel	149	0000000	00000

Oil Dispensers with Flow-Adjustment Valve

Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

							For Max. Viscosity
	Cap.	Bowl Dia.	Overall Ht.	Housing Material	Bowl Material	Pressure Regulation Method	ISO Grade	SAE Grade	SSU Grade, SSU	AGMA Grade	Features		Each
160° F Maximum Temperature







				1/2 NPTF Male Oil Outlet

				9 fl. oz.	3"	7 13/16"	Aluminum	Plastic	Vented	320	90	1,500	6	Glass Flow Sight	0000000	0000000


				12 fl. oz.	3"	9 1/8"	Aluminum	Plastic	Vented	320	90	1,500	6	Glass Flow Sight	0000000	000000
				16 fl. oz.	3 1/2"	9 1/8"	Aluminum	Plastic	Vented	320	90	1,500	6	Glass Flow Sight	0000000	000000
				1 qt.	4 1/4"	10 1/8"	Aluminum	Plastic	Vented	320	90	1,500	6	Glass Flow Sight	0000000	000000
				2 qt.	5 1/2"	12 1/16"	Aluminum	Plastic	Vented	320	90	1,500	6	Glass Flow Sight	0000000	000000
				1 gal.	5 1/2"	17 1/16"	Aluminum	Plastic	Vented	320	90	1,500	6	Glass Flow Sight	0000000	000000


				250° F Maximum Temperature







								1/2 NPTF Male Oil Outlet

								9 fl. oz.	3"	7 13/16"	Aluminum	Glass	Vented	320	90	1,500	6	Glass Flow Sight	0000000	000000


								16 fl. oz.	3 1/2"	9 1/8"	Aluminum	Glass	Vented	320	90	1,500	6	Glass Flow Sight	0000000	000000
								1 qt.	4 1/4"	10 1/8"	Aluminum	Glass	Vented	320	90	1,500	6	Glass Flow Sight	0000000	000000
								2 qt.	5 1/2"	12 1/16"	Aluminum	Glass	Vented	320	90	1,500	6	Glass Flow Sight	0000000	000000

Replacement Flow Sights

		Each
Replacement Flow Sights for 3" to 5 1/2" Bowl Dia.	000000	00000

Hydraulic Power Units

Create and supply hydraulic pressure. Choose a unit with a tank capacity about three times greater than your requirement to allow for heat dissipation. An inlet filter protects the pump from contamination.

All units include an additional NPTF threaded inlet port. NPTF (Dryseal) threads are compatible with NPT threads. UN/UNF (SAE Straight) thread connections have straight threads and are also known as O-ring Boss fittings.

					Overall			Inlet Connection — UN/UNF (SAE Straight)		Inlet Connection — NPTF		Outlet Connection — UN/UNF (SAE Straight)
	Max. Flow Rate, gpm	Max. Pressure, psi	Power, hp	Cap., gal.	Lg.	Wd.	Ht.	Thread Size	Dash Size	Pipe Size	Dash Size	Thread Size	Dash Size	Full Load Current @ Voltage		Each
240V AC/460V AC, Three Phase



		0.9	1,600	1	5	13"	15"	20 1/2"	7/8"-14	10	1/2	08	7/8"-14	10	1.5 amp @ 460V AC	00000000	000000000


		1.3	2,300	2	5	13"	15"	24 1/2"	7/8"-14	10	1/2	08	7/8"-14	10	2.8 amp @ 460V AC	00000000	00000000