Filter by
Detects
Environment
Hazardous Location Protection Type
Certification
Alert Type
Hazardous Location Rating
REACH
RoHS
DFARS Specialty Metals
Battery Chemistry
For Testing
Hydrogen Sulfide Detectors
 |
When these detectors sense high levels of hydrogen sulfide, they alert you with an audible alarm, warning light, and vibrating alarm. You can adjust the alarm trigger point to suit your environment.
A calibration check must be performed on the detector before each use to verify that it is working properly. The check requires a regulator, tubing, and cylinder (sold separately).
Nonreplaceable Batteries—The detector with a nonreplaceable battery should be thrown away at the end of its two-year lifespan.
Hydrogen Sulfide Concentration Measured, ppm | Volume (Sound) @ Distance | Temp. Range, ° F | Ht. | Wd. | Dp. | Batteries Included | Hazardous Location Rating | Enclosure Rating | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nonreplaceable Batteries | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0 to 100 | 95 dBA @ 30 cm | -4 to 122 | 3 1/2" | 2" | 1" | Yes | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Group G NEC Zone 0 Groups IIC, IIB, IIA IEC Zone 1 Groups IIC, IIB, IIA IECEx Ex Ia IIC T4 AEx Ia IIC T4 ATEX II 2 G Ex Ia IIC T4 Gb | IP67 | 18995T85 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Replaceable Batteries | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0 to 200 | 95 dBA @ 30 cm | 14 to 104 | 3 1/2" | 2" | 1" | Yes | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 IEC Zone 0 Groups IIC, IIB, IIA IECEx Ex Ia IIC T4 Ga ATEX II 1 G Ex Ia IIC T4 Ga | IP67 | 18995T19 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Portable Multi-Gas Detectors
 |
When these detectors sense high levels of combustible and toxic gases, they alert you with an audible alarm, warning light, and vibrating alarm. You can adjust the alarm trigger points to suit your environment. There is also a motion sensor that sounds an alarm if the user becomes disabled.
A calibration check must be performed on detectors before each use to verify that they are working properly. The check requires a regulator and cylinder (sold separately).
Note: LEL is lower explosive limit.
Detects (Measuring Range) | Volume (Sound) @ Distance | Temp. Range, ° F | Batteries Included | Hazardous Location Rating | Enclosure Rating | Each | ||
|---|---|---|---|---|---|---|---|---|
| Acetone, Butane, Hydrogen, Methane, Pentane, Propane, Toluene (Methylbenzene) (0% to 100% LEL) Oxygen (0% to 30% Vol.) Carbon Monoxide (0 ppm to 1,999 ppm) Hydrogen Sulfide (0 ppm to 200 ppm) | 95 dBA @ 30 cm | -40 to 140 | Yes | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 NEC Zone 0 Groups IIC, IIB, IIA AEx Da Ia IIC T4 Ga Ex Da Ia IIC T4 Ga | IP68 | 18995T42 | 000000000 |
Portable Multi-Gas Detectors with Probe
 |
Use the probe on these detectors to test the air in a hazardous area before entering. Great for confined spaces. Detectors alert you with an audible alarm, warning light, and vibrating alarm in the presence of combustible and toxic gases. You can adjust the alarm trigger points to suit your environment. There is also a motion sensor that sounds an alarm if the user becomes disabled.
A calibration check must be performed on these detectors before each use to verify that they are working properly. The check requires a regulator and cylinder (sold separately).
Note: LEL is lower explosive limit.
Detects (Measuring Range) | Volume (Sound) @ Distance | Temp. Range, ° F | Batteries Included | Includes | Tube Lg., ft. | Hazardous Location Rating | Enclosure Rating | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Acetone, Butane, Hydrogen, Methane, Pentane, Propane, Toluene (Methylbenzene) (0% to 100% LEL) Oxygen (0% to 30% Vol.) Carbon Monoxide (0 ppm to 1,999 ppm) Hydrogen Sulfide (0 ppm to 200 ppm) | 95 dBA @ 30 cm | -40 to 140 | Yes | Sampling Probe, Tubing Assembly, Battery | 25 | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 NEC Zone 0 Groups IIC, IIB, IIA AEx Da Ia IIC T4 Ga Ex Da Ia IIC T4 Ga | IP68 | 18995T44 | 000000000 |
Water Test Kits
 |
Digital |
All the chemicals and labware you need for on-site sampling and water-quality testing.
Digital—Digital kits offer simpler and more accurate testing than analog kits. While analog kits require you to visually match color against a chart, these kits electronically measure color for you, even in dim lighting. The digital screen shows you a precise measurement.
