I-Beam Mounts

Filter by

Mount Type

Beam Mount Location

For Beam Shape

Material

System of Measurement

Thread Size

For Suspending

Weight Capacity

Beam Width

Width

Length

Mounting Location

Finish

Height

Throat Depth

For Mounting Orientation

DFARS Compliance

Pipe Size

RoHS Compliance

REACH Compliance

Threaded Hole Size

Specifications Met

For Rigid Conduit Trade Size

Forward

How can we improve?

201 Products

Perpendicular Beam-to-Beam Clamps

Add a crossbeam for hanging lifting equipment, creating overhead conveyor systems, and supporting structural applications.

Parallel Beam-to-Beam Clamps

Join two beams in a straight line.

Beam Clamps for Threaded Rod

Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.

Sloped Beam Clamps for Threaded Rod

These clamps rotate 360° and pivot 45° to ensure the rod hangs straight, even on sloped beams.

Press-Fit Beam Clamps for Threaded Rod

A toothed clip secures these clamps to the beam—no fasteners required.

Angled Beam Clamps for Threaded Rod

Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.

Center-Mount Beam Clamps for Threaded Rod

For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.

Beam Clamps for Hooks and Hangers

Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.

Beam Clamps for Strut Channel

Support strut channel at a right angle to the beam.

Beam Clamps for Pipe, Tube, and Conduit

These clamps have a fixed hanger for rigid connections.

Easy-Position Beam Clamps
for Pipe, Tube, and Conduit

Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.

Angle Iron Clamps for Threaded Rod

A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.

Beam Clamps with Tie Wire Hanger

Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material.

Tie Wire Hangers

Attach these light duty hangers to ceilings and walls. They have a stiff wire for supporting suspended ceilings and lighting fixtures.

Threaded Rod Mounts

Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.

Strut Channel Beam Mounts

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.