Indexable-Insert End Mills

Filter by

Cut Style

For Use On

Mill Diameter

Insert Shape

Material

Shank Diameter

Number of Inserts Required

Shank Type

Finish

Titanium Aluminum Nitride (TiAlN) Coated

Titanium Carbon Nitride (TiCN) Coated

Titanium Diboride (TiB₂) Coated

Arbor Hole Diameter

Sold As

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

RoHS

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Component

Overall Length

Insert Finish

Titanium Aluminum Nitride (TiAlN) Coated

Titanium Carbon Nitride (TiCN) Coated

Titanium Diboride (TiB₂) Coated

Cutting Angle

Mill Thickness

Mount Type

Length

Keyway Width

Rake Angle Type

Lead Angle

201 Products

Carbide Inserts for Replaceable Carbide-Insert Milling Cutters


	Octagon	Round	Square

Combine a holder with carbide inserts to create a milling cutter, also known as indexable milling cutters. They remove metal at least two times faster than comparable high-speed steel milling cutters. When the cutting edges dull, replace the carbide inserts instead of the entire tool.

Use with an R8 shank arbor (sold separately).

Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment. Inserts sold in packs come factory sealed from the manufacturer for maximum traceability.

Titanium Diboride (TiB2)-Coated Carbide—Titanium-diboride (TiB2) coated inserts reduce friction in nonferrous metals and composites, so you can use them without lubrication in material like aluminum, fiberglass, and plastic.

Titanium Carbon Nitride (TiCN)-Coated Carbide—Titanium-carbon-nitride (TiCN) coated inserts have a hard, smooth finish that resists chipping and wear and prevents material from accumulating on the cutting edge. They’re especially good for use in aluminum.

Titanium Aluminum Nitride (TiAlN)-Coated Carbide—Titanium-aluminum-nitride (TiAlN) coated inserts dissipate heat better than other inserts, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the inserts cool, even when used without lubrication.

Octagon—Use octagon inserts for general face milling. With eight cutting edges, they generate smooth cuts.

Round—Use round inserts for roughing and heavy cuts. Their shape makes them stronger than octagon and square inserts.

Square—Use square inserts to create a 90° corner when shoulder milling.

			Octagon		Round		Square
	For Use On	Pkg. Qty.		Pkg.		Pkg.		Pkg.
Titanium Diboride (TiB2)-Coated Carbide



		Aluminum, Copper	1	8826A351	000000	8826A352	000000	8826A353	000000


		Aluminum, Copper	10	8826A38	000000	8826A385	000000	8826A386	000000


		Titanium Carbon Nitride (TiCN)-Coated Carbide



				Stainless Steel	1	8826A321	00000	8826A322	00000	8826A323	00000


				Stainless Steel	10	8826A143	000000	8826A151	000000	8826A153	000000


				Titanium Aluminum Nitride (TiAlN)-Coated Carbide



						Hardened Steel, Tool Steel	1	8826A361	00000	8826A362	00000	8826A363	00000


						Hardened Steel, Tool Steel	10	8826A387	000000	8826A509	000000	8826A774	000000
						Iron	1	8826A331	00000	8826A332	00000	8826A333	00000
						Iron	10	8826A169	000000	8826A182	000000	8826A19	000000
						Nickel, Titanium	1	8826A341	00000	8826A342	00000	8826A343	00000
						Nickel, Titanium	10	8826A235	000000	8826A346	000000	8826A379	000000
						Steel	1	8826A311	00000	8826A312	00000	8826A313	00000
						Steel	10	8826A104	000000	8826A116	000000	8826A124	000000

Replaceable Carbide-Insert Square End Mill Holders for Manual Milling Machines


Square Cut Style	End Mill Body Shown with Inserts (Sold Separately)

Use these tools with low-horsepower, manual milling machines. They have clamps for holding inserts that do not have a mounting hole. Replaceable carbide-insert end mills reduce waste and cost in high-volume jobs—when the cutting edges dull, replace the carbide inserts instead of the entire tool. End mills have a square cut style for milling square slots, pockets, and edges. All are noncenter-cutting for operations where the sides of the teeth do most of the work, such as shoulder milling, contouring, and finishing. They cannot be used for plunge cuts.

R8 Taper Shank—R8-shank end mills have internal threads on the tapered end for connecting to a drawbar.

			Shank Thread
	Mill Dia.	Shank Dia.	Gender	Size	Overall Lg.	No. of Inserts Req.	Cut Style	Material	End Mill Type		Each
Round Shank



		3/4"	3/4"	—	—	3 7/8"	1	Square	Black-Oxide Steel	Noncenter Cutting	8902A31	000000


		1"	3/4"	—	—	3 7/8"	1	Square	Black-Oxide Steel	Noncenter Cutting	8902A32	000000
		1 1/4"	3/4"	—	—	3 7/8"	2	Square	Black-Oxide Steel	Noncenter Cutting	8902A34	000000
		1 3/8"	3/4"	—	—	3 7/8"	2	Square	Black-Oxide Steel	Noncenter Cutting	8902A36	000000
		1 1/2"	3/4"	—	—	3 7/8"	3	Square	Black-Oxide Steel	Noncenter Cutting	8902A37	000000
		1 1/2"	1"	—	—	3 7/8"	3	Square	Black-Oxide Steel	Noncenter Cutting	8902A38	000000
		2"	3/4"	—	—	3 7/8"	3	Square	Black-Oxide Steel	Noncenter Cutting	8902A44	000000
		2"	1"	—	—	6 1/4"	3	Square	Black-Oxide Steel	Noncenter Cutting	8902A52	000000


		R8 Taper Shank



				1"	—	Female	7/16"-20	5 7/8"	1	Square	Black-Oxide Steel	Noncenter Cutting	8902A33	000000


				1 1/4"	—	Female	7/16"-20	5 7/8"	2	Square	Black-Oxide Steel	Noncenter Cutting	8902A35	000000
				1 1/2"	—	Female	7/16"-20	5 7/8"	3	Square	Black-Oxide Steel	Noncenter Cutting	8902A39	000000
				1 5/8"	—	Female	7/16"-20	5 7/8"	3	Square	Black-Oxide Steel	Noncenter Cutting	8902A41	000000
				1 3/4"	—	Female	7/16"-20	5 7/8"	3	Square	Black-Oxide Steel	Noncenter Cutting	8902A43	000000
				2"	—	Female	7/16"-20	5 7/8"	3	Square	Black-Oxide Steel	Noncenter Cutting	8902A45	000000
				2 1/2"	—	Female	7/16"-20	5 7/8"	5	Square	Black-Oxide Steel	Noncenter Cutting	8902A56	000000
				3"	—	Female	7/16"-20	5 7/8"	5	Square	Black-Oxide Steel	Noncenter Cutting	8902A57	000000

Accessories and Replacements for End Mill Insert Holders

End Mill Inserts

Titanium Nitride (TiN)-Coated Carbide—Carbide inserts have a wear-resistant titanium-nitride (TiN) coating.

						Each		Package
	Tip Radius	Insert Code	Insert Size	Thk.	For Use On		Each	Pkg. Qty.		Pkg.
Titanium Nitride (TiN)-Coated Carbide



		1/64"	TPG-321	3/8"	1/8"	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	7376A171	000000	10	7376A255	000000


		1/32"	TPG-322	3/8"	1/8"	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	7376A172	00000	10	7376A357	00000
		3/64"	TPG-323	3/8"	1/8"	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	7376A193	00000	10	7376A52	00000
		1/16"	TPG-324	3/8"	1/8"	Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel	7376A194	00000	10	7376A573	00000

		Each
Replacement Clamp Screw	8902A65	00000
Replacement Hold-Down Clamp	8902A64	00000

Replaceable Carbide-Insert Face Milling Cutter Kits


Holder Shown with Octagon Inserts

Image of Attribute. Side1 orientation. Contains Annotated. Replaceable Carbide-Insert Face Milling Cutter Kits.

Octagonal Insert

Square Insert

Create your own versatile milling cutters. These kits include a cutter body, inserts, wrenches, and screws. Also known as indexable end mills, replaceable insert milling cutters remove metal at least two times faster than comparable high-speed steel milling cutters. When the cutting edges dull, replace the carbide inserts instead of the entire tool. The inserts come factory sealed from the manufacturer for maximum traceability.

Use with an R8 shank arbor (sold separately).

Kits come with either octagon or square inserts.

Titanium Diboride (TiB2)-Coated Carbide Insert—Titanium-diboride (TiB2)-coated inserts reduce friction in nonferrous metals and composites, so you can use them without lubrication in material like aluminum, fiberglass, and plastic.

Titanium Aluminum Nitride (TiAlN)-Coated Carbide Insert—Titanium-aluminum-nitride (TiAlN)-coated inserts dissipate heat better than other inserts, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the inserts cool, even when used without lubrication.

Octagonal Insert—Use octagon inserts for general face milling. With eight cutting edges, they generate smooth cuts.

Square Insert—Use square inserts to create a 90° corner when shoulder milling.

	Mill
	Thick.	Dia.	Arbor Hole Dia.	Keyway Wd.	For Use On	Includes	Container Type		Each
Titanium Diboride (TiB2)-Coated Carbide Insert







				Octagonal Insert

				1 23/32"	2"	3/4"	0.313"	Aluminum, Copper	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A51	0000000


				1 7/8"	3"	1 1/4"	0.5"	Aluminum, Copper	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A52	000000
				1 7/8"	4"	1 1/2"	0.625"	Aluminum, Copper	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A53	000000




						Square Insert

						1 23/32"	2"	3/4"	0.313"	Aluminum, Copper	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A54	000000


						1 7/8"	3"	1 1/4"	0.5"	Aluminum, Copper	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A55	000000
						1 7/8"	4"	1 1/2"	0.625"	Aluminum, Copper	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A56	000000


						Titanium Aluminum Nitride (TiAlN)-Coated Carbide Insert







										Octagonal Insert

										1 23/32"	2"	3/4"	0.313"	Hardened Steel, Tool Steel	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A47	000000


										1 23/32"	2"	3/4"	0.313"	Steel	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A41	000000
										1 7/8"	3"	1 1/4"	0.5"	Hardened Steel, Tool Steel	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A48	000000
										1 7/8"	3"	1 1/4"	0.5"	Steel	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A42	000000
										1 7/8"	4"	1 1/2"	0.625"	Hardened Steel, Tool Steel	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A49	000000
										1 7/8"	4"	1 1/2"	0.625"	Steel	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A43	000000




												Square Insert

												1 23/32"	2"	3/4"	0.313"	Steel	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A44	000000


												1 7/8"	3"	1 1/4"	0.5"	Steel	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A45	000000
												1 7/8"	4"	1 1/2"	0.625"	Steel	10 Inserts, Cutter Body, Extra Screws, Two Wrenches	Plastic Case	8826A46	000000

Holders for Replaceable Carbide-Insert Milling Cutters


	Holder Shown with Octagon Inserts

Combine an insert holder with carbide inserts (sold separately) to create a milling cutter, also known as indexable milling cutters. They remove metal at least two times faster than comparable high-speed steel milling cutters. When the cutting edges dull, replace the carbide inserts instead of the entire tool.

Use with an R8 shank arbor (sold separately).

Insert Holders									Replacement Screws
Mill
Thk.	Dia.	Arbor Hole Dia.	Keyway Wd.	No. of Inserts Req.	Material	Heat Treatment		Each		Each



	1 23/32"	2"	3/4"	0.313"	4	Uncoated Steel	Hardened	8826A11	0000000	8826A29	00000


	1 7/8"	3"	1 1/4"	0.5"	5	Uncoated Steel	Hardened	8826A12	000000	8826A29	0000
	1 7/8"	3 1/2"	1 1/2"	0.625"	5	Uncoated Steel	Hardened	8826A13	000000	8826A29	0000
	1 7/8"	4"	1 1/2"	0.625"	6	Uncoated Steel	Hardened	8826A14	000000	8826A29	0000
	1 61/64"	5"	1 1/2"	0.625"	6	Uncoated Steel	Hardened	8826A15	000000	8826A29	0000
	1 61/64"	6"	1 1/2"	0.625"	8	Uncoated Steel	Hardened	8826A16	000000	8826A29	0000

Replaceable Carbide-Insert Square End Mill Holders

Square Cut Style

Pair carbide inserts with a holder to create end mills that reduce waste and cost in high-volume jobs. When the cutting edges dull, replace the inserts instead of the entire tool. These end mills are also known as indexable shoulder mills. All are noncenter cutting for operations where the sides of the teeth do most of the work, such as shoulder milling, contouring, and finishing. They can’t be used for plunge cuts. They have a square cut style for creating square slots, pockets, flat surfaces, and edges.

When choosing an end mill holder, consider the type of finish you want. The finer the finish, the more inserts you’ll need. More inserts mean tighter spacing, so you can machine at high speeds and remove material quickly while leaving a smooth surface. However, you’ll also need more machine power. Fewer inserts mean a coarser finish—the inserts are spaced apart to help with chip evacuation. A coarse finish is best for roughing applications, light machining, and cutting soft metals such as aluminum.

Shank Mount

Shank Mount Shown

with Inserts (Sold

Separately)

For shank mount holders, you’ll need two or three positive-rake-angle inserts. Both the holders and inserts are designed to reduce vibration and keep thin workpieces from bending. However, the inserts have cutting edges only on one side. Chip breakers on the inserts keep long chips from forming, so they don't damage your tooling or restrict coolant flow.

	Insert Holders									Replacement Insert Screws
	Mill Dia.	Shank Dia.	Overall Lg.	No. of Inserts Req.	Cut Style	Material	End Mill Type		Each		Each
Round Shank







				Coarse Grit

				3/8"	3/8"	2 3/8"	2	Square	Steel	Noncenter Cutting	2913N11	0000000	4660N31	00000


				1/2"	1/2"	2 3/4"	2	Square	Steel	Noncenter Cutting	2913N12	000000	4660N31	0000
				5/8"	3/4"	3 1/4"	2	Square	Steel	Noncenter Cutting	2913N13	000000	4660N32	0000
				1"	1"	4"	2	Square	Steel	Noncenter Cutting	2913N15	000000	4660N33	0000




						Fine Grit

						3/4"	3/4"	3 23/64"	3	Square	Steel	Noncenter Cutting	2913N14	000000	4660N32	0000


						1 1/4"	1 1/4"	4"	3	Square	Steel	Noncenter Cutting	2913N16	000000	4660N34	0000
						1 1/2"	1 1/4"	4 1/2"	3	Square	Steel	Noncenter Cutting	2913N17	000000	4660N34	0000

End Mill Inserts


2 Cutting Edges	Individual Carbide Insert Case	End Mill Inserts

Choose inserts that match the holder's mount type and the material you want to cut. Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment. Inserts sold in packs come factory sealed from the manufacturer for maximum traceability.

Aluminum Titanium Chromium Nitride (AlTiCrN)-Coated Carbide—Coated inserts are used for demanding, high-speed jobs in hard material. They’re harder and more wear resistant than uncoated carbide inserts.

Uncoated Carbide—Uncoated inserts are best for general purpose milling and short production runs.

											Each		Package
	For Mill Dia.	Tip Radius	Cutting Edge Lg.	Insert Wd.	Thk.	Hole Dia.	No. of Cutting Edges	Rake Angle Type	Finished Material	Features		Each	Pkg. Qty.		Pkg.
For Shank Holder Mounts







				For Aluminum, Brass, Bronze, Copper, and Plastic

				3/8", 1/2"	1/64"	0.23"	0.16"	3/32"	1/16"	2	Positive	Uncoated Carbide	Chip Breakers	3094N22	000000	10	3094N161	0000000


				5/8", 3/4"	1/64"	0.39"	0.268"	9/64"	1/8"	2	Positive	Uncoated Carbide	Chip Breakers	3094N24	00000	10	3094N492	000000
				1", 1 1/4", 1 1/2"	1/32"	0.62"	0.378"	3/16"	3/16"	2	Positive	Uncoated Carbide	Chip Breakers	3094N26	00000	10	3094N666	000000




						For Aluminum, Brass, Bronze, Copper, Hardened Steel, Nickel, Stainless Steel, Steel, and Titanium

						3/8", 1/2"	1/64"	0.23"	0.16"	3/32"	1/16"	2	Positive	Aluminum Titanium Chromium Nitride (AlTiCrN)-Coated Carbide	Chip Breakers	3094N21	00000	10	3094N12	000000


						5/8", 3/4"	1/64"	0.39"	0.268"	9/64"	1/8"	2	Positive	Aluminum Titanium Chromium Nitride (AlTiCrN)-Coated Carbide	Chip Breakers	3094N23	00000	10	3094N475	000000
						1", 1 1/4", 1 1/2"	1/32"	0.62"	0.378"	3/16"	3/16"	2	Positive	Aluminum Titanium Chromium Nitride (AlTiCrN)-Coated Carbide	Chip Breakers	3094N25	00000	10	3094N515	000000

Arbor Mount

Arbor Mount Shown

with Inserts (Sold

Separately)

For arbor mount holders, you’ll need four or more negative-rake-angle inserts. Since the inserts have cutting edges on both sides, they last longer than positive-rake inserts. When all the edges on one side are dull, flip the insert over. These holders have a hole that passes coolant from your machine onto the workpiece, minimizing heat.

Insert Holders											Replacement Insert Screws
Mill Dia.	Arbor Hole Dia.	Keyway Wd.	Overall Lg.	No. of Inserts Req.	Cut Style	Material	End Mill Type	Features		Each	Pkg. Qty.		Pkg.







			Coarse Grit

			2"	3/4"	0.322"	1 9/16"	4	Square	Steel	Noncenter Cutting	Coolant Holes	2913N18	0000000	10	2913N29	000000


			3"	1"	0.385"	1 3/4"	5	Square	Steel	Noncenter Cutting	Coolant Holes	2913N23	000000	10	2913N29	00000
			4"	1 1/2"	0.635"	2"	6	Square	Steel	Noncenter Cutting	Coolant Holes	2913N26	000000	10	2913N29	00000




					Fine Grit

					2"	3/4"	0.322"	1 9/16"	5	Square	Steel	Noncenter Cutting	Coolant Holes	2913N19	000000	10	2913N29	00000


					2 1/2"	3/4"	0.322"	1 9/16"	5	Square	Steel	Noncenter Cutting	Coolant Holes	2913N21	000000	10	2913N29	00000
					2 1/2"	3/4"	0.322"	1 9/16"	7	Square	Steel	Noncenter Cutting	Coolant Holes	2913N22	000000	10	2913N29	00000
					3"	1"	0.385"	1 3/4"	7	Square	Steel	Noncenter Cutting	Coolant Holes	2913N24	000000	10	2913N29	00000
					4"	1 1/2"	0.635"	2"	8	Square	Steel	Noncenter Cutting	Coolant Holes	2913N27	000000	10	2913N29	00000




							Extra-Fine Grit

							3"	1"	0.385"	1 3/4"	9	Square	Steel	Noncenter Cutting	Coolant Holes	2913N25	000000	10	2913N29	00000


							4"	1 1/2"	0.635"	2"	11	Square	Steel	Noncenter Cutting	Coolant Holes	2913N28	000000	10	2913N29	00000

End Mill Inserts


8 Cutting Edges	Individual Carbide Insert Case	End Mill Inserts

Aluminum Oxide-Coated Carbide, Titanium Diboride (TiB2)-Coated Carbide, and Titanium Nitride (TiN)-Coated Carbide—Coated inserts are used for demanding, high-speed jobs in hard material. They’re harder and more wear resistant than uncoated carbide inserts.

										Each		Package
	For Mill Dia.	Tip Radius	Cutting Edge Lg.	Insert Wd.	Thk.	Hole Dia.	No. of Cutting Edges	Rake Angle Type	Finished Material		Each	Pkg. Qty.		Pkg.
For Arbor Holder Mounts







				For Aluminum, Brass, Bronze, Copper, Nickel, Stainless Steel, and Steel

				2", 2 1/2", 3", 4"	1/32"	0.46"	0.472"	7/32"	3/16"	8	Negative	Titanium Nitride (TiN)-Coated Carbide	3094N35	000000	5	3094N31	0000000


				2", 2 1/2", 3", 4"	1/16"	0.46"	0.472"	7/32"	3/16"	8	Negative	Titanium Nitride (TiN)-Coated Carbide	3094N38	00000	5	3094N34	000000




						For Cast Iron

						2", 2 1/2", 3", 4"	1/32"	0.46"	0.472"	7/32"	3/16"	8	Negative	Aluminum Oxide-Coated Carbide	3094N37	00000	5	3094N33	000000




								For Aluminum

								2", 2 1/2", 3", 4"	1/32"	0.46"	0.472"	7/32"	3/16"	8	Negative	Titanium Diboride (TiB2)-Coated Carbide	3094N36	00000	5	3094N32	000000

Replaceable Carbide-Insert Drill/Mill End Mill Holders


Drill/Mill Cut Style	End Mill Body Shown with Inserts (Sold Separately)

Fasten one insert to the center of these end mills and three more to the sides, and you can use them for drilling, shoulder milling, contouring, and finishing. When the cutting edges dull, switch out the inserts instead of replacing the whole tool. These end mills help you reduce waste and costs in high-volume jobs. The inserts are locked in place with a screw for a hold that’s strong enough to handle the high speeds of a CNC machine.

	Insert Holders								Replacement Insert Screws
	Mill Dia.	Shank Dia.	Overall Lg.	Cut Style	Material	Insert Position (Number of Inserts Required)		Each	Pkg. Qty.		Pkg.
Round Shank



		5/8"	5/8"	4 11/16"	Drill/Mill	Steel	Side (3), Center (1)	8288N111	0000000	10	8288N115	000000


		3/4"	3/4"	5 3/32"	Drill/Mill	Steel	Side (3), Center (1)	8288N112	000000	10	8288N116	00000
		1"	1"	5 1/2"	Drill/Mill	Steel	Side (3), Center (1)	8288N113	000000	10	8288N117	00000
		1 1/4"	1 1/4"	5 27/32"	Drill/Mill	Steel	Side (3), Center (1)	8288N114	000000	10	8288N118	00000

Replaceable Carbide-Insert Chamfer End Mill Holders


Chamfer Cut Style	End Mill Body Shown with Inserts (Sold Separately)

Cut down on waste and cost during high-volume jobs. These end mills consist of a holder and a carbide insert, so you can swap in a fresh cutting edge without replacing the whole tool. The inserts are locked in place with a screw for a hold that’s strong enough to handle the high speeds of a CNC machine. They’re held at an angle, so you can create chamfers, bevels, and other angled cuts. You can also use them like a face mill for flat surface cutting.

	Insert Holders								Replacement Insert Screws
	Mill Dia.	Shank Dia.	Overall Lg.	Lead Angle	Material	No. of Inserts Req.		Each		Each
For Aluminum







				30° Cutting Angle

				5/32"	3/4"	3 1/4"	15°	Steel	2	8300N115	0000000	8300N122	00000




						40° Cutting Angle

						3/16"	3/4"	3 1/4"	20°	Steel	2	8300N116	000000	8300N122	0000




								60° Cutting Angle

								5/16"	3/4"	3 1/4"	30°	Steel	2	8300N117	000000	8300N122	0000




										90° Cutting Angle

										7/16"	3/4"	3 1/4"	45°	Steel	2	8300N118	000000	8300N122	0000




												120° Cutting Angle

												1/2"	3/4"	3 1/4"	60°	Steel	2	8300N119	000000	8300N122	0000




														150° Cutting Angle

														19/32"	3/4"	3 1/4"	75°	Steel	2	8300N121	000000	8300N122	0000


														For Nickel, Stainless Steel, Steel, and Titanium







																		30° Cutting Angle

																		3/32"	1/2"	2 3/4"	15°	Steel	2	8300N102	000000	8300N123	0000


																		5/32"	3/4"	1 1/4"	15°	Steel	2	8300N101	000000	8300N125	0000




	40° Cutting Angle

	1/8"																		1/2"	2 25/32"	20°	Steel	2	8300N104	000000	8300N123	0000


	3/16"	3/4"																	3 5/32"	20°	Steel	2	8300N103	000000	8300N125	0000




			60° Cutting Angle

			5/32"																5/8"	2 15/16"	30°	Steel	2	8300N106	000000	8300N123	0000


			5/16"	3/4"	3 5/32"														30°	Steel	2	8300N105	000000	8300N126	0000




					75° Cutting Angle

					3/8"	3/4"	3 5/32"												38°	Steel	2	8300N127	000000	8300N126	0000




							82° Cutting Angle

							3/8"	3/4"											3 5/32"	41°	Steel	2	8300N107	000000	8300N126	0000




									90° Cutting Angle

									1/4"										5/8"	2 15/16"	45°	Steel	2	8300N109	000000	8300N124	0000


									13/32"	3/4"	3 5/32"								45°	Steel	2	8300N108	000000	8300N126	0000




											120° Cutting Angle

											5/16"	5/8"	2 15/16"						60°	Steel	2	8300N112	000000	8300N124	0000


											1/2"	3/4"	3 5/32"						60°	Steel	2	8300N111	000000	8300N126	0000




													150° Cutting Angle

													3/8"	5/8"	2 15/16"				75°	Steel	2	8300N113	000000	8300N124	0000


													19/32"	3/4"	3 5/32"	75°			Steel	2	8300N114	000000	8300N126	0000

Holders for Replaceable Carbide-Insert Face Milling Cutters

Designed for milling the surfaces of plates and bars, cutters consist of multiple carbide inserts and a holder. They help you reduce waste and cost in high-volume jobs—when the cutting edges dull, replace the inserts instead of the entire tool. Cutters have a large mill diameter for making wide, shallow cuts on the face or side of your workpiece. They also have a hole that passes coolant from your machine onto the workpiece, minimizing heat.

When choosing a holder, consider the grit rating you want. The finer the grit, the more inserts you’ll need. More inserts mean tighter spacing, so you can machine at high speeds and remove material quickly while leaving a smooth surface. However, you’ll also need more machine power.

Shank Mount

Shank Mount Shown with

Inserts (Sold Separately)

Coarse Grit—Fewer inserts mean a coarser grit—the inserts are spaced apart to help with chip evacuation. A coarse grit is best for roughing applications, light machining, and cutting soft metals such as aluminum.

	Insert Holders									Replacement Screws
	Mill
	Thk.	Dia.	Shank Dia.	Helix Angle	No. of Inserts Req.	Material	Rake Angle Type		Each	Pkg. Qty.		Pkg.
Coarse Grit



		1 9/16"	1 1/2"	1 1/4"	45°	2	Nickel-Plated Steel	Negative	9165N137	0000000	10	9165N142	000000


		1 9/16"	1 1/2"	1 1/4"	45°	3	Nickel-Plated Steel	Negative	9165N138	000000	10	9165N142	00000
		1 9/16"	2"	1 1/4"	45°	3	Nickel-Plated Steel	Negative	9165N139	000000	10	9165N142	00000
		1 9/16"	2 1/2"	1 1/4"	45°	4	Nickel-Plated Steel	Negative	9165N141	000000	10	9165N142	00000

Carbide Inserts

Image of ProductInUse. Front orientation. Face Mill Inserts. Holders for Replaceable Carbide-Insert Face Milling Cutters.

Individual Carbide

Insert Case

Image of Product. Front orientation. Face Mill Inserts. Holders for Replaceable Carbide-Insert Face Milling Cutters.

Image of Attribute. Front orientation. Contains Annotated, MultipleImages. Holders for Replaceable Carbide-Insert Face Milling Cutters.

Carbide Inserts

Inserts are locked in place with a screw for a hold that’s strong enough to handle the high speeds of a CNC machine. They have a negative rake, which means they have cutting edges on both sides. They last longer than comparable positive-rake inserts. As each edge dulls, you can rotate to a fresh one. When all the edges on one side are worn, flip the insert over. Built-in chip breakers prevent long chips from forming, so they won’t block the flow of coolant or damage your tool. Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment. Inserts sold in packs come factory sealed from the manufacturer for maximum traceability.

										Each		Package
	For Use On	For Mill Dia.	IC Dia.	Cutting Edge Lg.	Thk.	Hole Dia.	No. of Cutting Edges	Tip Radius	Rake Angle Type		Each	Pkg. Qty.		Pkg.
Aluminum Titanium Chromium Nitride (AlTiCrN)-Coated Carbide



		Cast Iron	1 1/2", 2", 2 1/2", 3", 4", 5"	0.579"	0.58"	1/4"	7/32"	8	1/16"	Negative	8339N127	000000	10	8339N123	0000000


		Hardened Steel, Steel	1 1/2", 2", 2 1/2", 3", 4", 5"	0.579"	0.58"	1/4"	7/32"	8	1/32"	Negative	8339N125	00000	10	8339N121	000000
		Stainless Steel, Titanium	1 1/2", 2", 2 1/2", 3", 4", 5"	0.579"	0.58"	1/4"	7/32"	8	1/32"	Negative	8339N126	00000	10	8339N122	000000


		Diamondlike Carbon (DLC)-Coated Carbide



				Aluminum, Brass, Bronze, Copper, Plastic	1 1/2", 2", 2 1/2", 3", 4", 5"	0.579"	0.58"	1/4"	7/32"	8	1/32"	Negative	8339N128	00000	10	8339N124	000000

Arbor Mount

Shown with

Inserts (Sold

Separately)

	Insert Holders										Replacement Screws
	Mill
	Thk.	Dia.	Arbor Hole Dia.	Keyway Wd.	Helix Angle	No. of Inserts Req.	Material	Rake Angle Type		Each	Pkg. Qty.		Pkg.
Coarse Grit



		1 9/16"	2"	3/4"	0.313"	45°	3	Nickel-Plated Steel	Negative	9165N121	0000000	10	9165N142	000000


		1 9/16"	2 1/2"	3/4"	0.313"	45°	4	Nickel-Plated Steel	Negative	9165N124	000000	10	9165N142	00000
		1 31/32"	3"	1"	0.382"	45°	5	Nickel-Plated Steel	Negative	9165N127	000000	10	9165N142	00000
		1 31/32"	4"	1 1/2"	0.626"	45°	5	Nickel-Plated Steel	Negative	9165N131	000000	10	9165N142	00000
		2 15/32"	5"	1 1/2"	0.626"	45°	6	Nickel-Plated Steel	Negative	9165N134	000000	10	9165N142	00000


		Fine Grit



				1 9/16"	2"	3/4"	0.313"	45°	4	Nickel-Plated Steel	Negative	9165N122	000000	10	9165N142	00000


				1 9/16"	2 1/2"	3/4"	0.313"	45°	5	Nickel-Plated Steel	Negative	9165N125	000000	10	9165N142	00000
				1 31/32"	3"	1"	0.382"	45°	6	Nickel-Plated Steel	Negative	9165N129	000000	10	9165N142	00000
				1 31/32"	4"	1 1/2"	0.626"	45°	8	Nickel-Plated Steel	Negative	9165N133	000000	10	9165N142	00000
				2 15/32"	5"	1 1/2"	0.626"	45°	10	Nickel-Plated Steel	Negative	9165N136	00000000	10	9165N142	00000


				Extra-Fine Grit



						1 9/16"	2"	3/4"	0.313"	45°	5	Nickel-Plated Steel	Negative	9165N123	000000	10	9165N142	00000


						1 9/16"	2 1/2"	3/4"	0.313"	45°	6	Nickel-Plated Steel	Negative	9165N126	000000	10	9165N142	00000
						1 31/32"	3"	1"	0.382"	45°	8	Nickel-Plated Steel	Negative	9165N128	000000	10	9165N142	00000
						1 31/32"	4"	1 1/2"	0.626"	45°	10	Nickel-Plated Steel	Negative	9165N132	00000000	10	9165N142	00000
						2 15/32"	5"	1 1/2"	0.626"	45°	13	Nickel-Plated Steel	Negative	9165N135	00000000	10	9165N142	00000

Carbide Inserts

Individual Carbide

Insert Case

Carbide Inserts

										Each		Package
	For Use On	For Mill Dia.	IC Dia.	Cutting Edge Lg.	Thk.	Hole Dia.	No. of Cutting Edges	Tip Radius	Rake Angle Type		Each	Pkg. Qty.		Pkg.
Aluminum Titanium Chromium Nitride (AlTiCrN)-Coated Carbide



		Cast Iron	1 1/2", 2", 2 1/2", 3", 4", 5"	0.579"	0.58"	1/4"	7/32"	8	1/16"	Negative	8339N127	000000	10	8339N123	0000000


		Hardened Steel, Steel	1 1/2", 2", 2 1/2", 3", 4", 5"	0.579"	0.58"	1/4"	7/32"	8	1/32"	Negative	8339N125	00000	10	8339N121	000000
		Stainless Steel, Titanium	1 1/2", 2", 2 1/2", 3", 4", 5"	0.579"	0.58"	1/4"	7/32"	8	1/32"	Negative	8339N126	00000	10	8339N122	000000


		Diamondlike Carbon (DLC)-Coated Carbide



				Aluminum, Brass, Bronze, Copper, Plastic	1 1/2", 2", 2 1/2", 3", 4", 5"	0.579"	0.58"	1/4"	7/32"	8	1/32"	Negative	8339N128	00000	10	8339N124	000000

Counterbore Insert Holders

Shown with Inserts (Sold

Separately)

Designed to reduce waste and costs during high-volume jobs, these counterbores consist of both an insert and a holder. When the cutting edges dull, you can replace the insert rather than the entire tool. The inserts are locked in place with a screw for a hold that’s strong enough to handle the high speeds of a CNC machine. These counterbores create flat-bottomed holes that allow socket head screws to sit flush with the surface of your material.

	Counterbore Insert Holders								Replacement Insert Screws
		Dia.
	For Screw Size	Body	Shank	Overall Lg.	Max. Hole Drilling Dp.	No. of Inserts Req.		Each	Pkg. Qty.		Pkg.
Steel



		1/4"	0.422"	3/4"	2 7/8"	0.54"	1	8129N122	0000000	10	8129N133	000000


		5/16"	0.515"	3/4"	2 7/8"	0.54"	1	8129N125	000000	10	8129N133	00000
		3/8"	0.515"	3/4"	2 7/8"	0.54"	1	8129N124	000000	10	8129N133	00000
		7/16"	0.703"	3/4"	2 7/8"	0.54"	1	8129N127	000000	10	8129N133	00000
		1/2"	0.797"	3/4"	3 1/4"	0.79"	2	8129N121	000000	10	8129N133	00000
		5/8"	1"	3/4"	3 1/4"	0.79"	2	8129N126	000000	10	8129N133	00000
		3/4"	1.187"	3/4"	3 1/4"	0.79"	2	8129N123	000000	10	8129N133	00000
		M6	0.440"	3/4"	2 7/8"	0.54"	1	8129N131	000000	10	8129N133	00000
		M8	0.558"	3/4"	2 7/8"	0.54"	1	8129N132	000000	10	8129N133	00000
		M10	0.676"	3/4"	2 7/8"	0.54"	1	8129N128	000000	10	8129N133	00000
		M12	0.755"	3/4"	3 1/4"	0.79"	2	8129N129	000000	10	8129N133	00000

Carbide Inserts


Individual Carbide Insert Case

Inserts have a positive rake, which means the cutting edge is angled to reduce vibration and prevent thin workpieces from bending. For longer life, each insert has three cutting edges—when one edge dulls, rotate to the next one. They have chip breakers to stop long chips from forming, so they won’t block the flow of coolant or damage your tool. Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment. Inserts sold in packs come factory sealed from the manufacturer for maximum traceability.

						Each		Package
	IC Dia.	Thk.	Cutting Edge Lg.	Tip Radius	For Use On		Each	Pkg. Qty.		Pkg.
Titanium Nitride (TiN) Coated



		7/32"	3/32"	0.35"	1/64"	Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel	8909N122	000000	10	8909N121	000000