McMaster-Carr logo
    Filter by
    Container Type
    Component
    Thickness
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Industrial Info Compare
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Mix Ratio
    Process After Hardening
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    Help me decide (beta)
    26 Products

    Deep-Crack Concrete Fillers

    Image of Product. Front orientation. Surface Fillers. Deep-Crack Concrete Fillers.
    Fill cracks up to 10" deep on vertical and overhead surfaces. To use this filler, secure the included injection ports to the crack with the two-part epoxy sealer, then spread sealer over the entire crack. Allow sealer 24 hours to cure. Application time for sealer, after mixing, is 40 minutes. To fill the rest of the void, use the cartridge with a standard caulk gun (sold separately) to dispense the two-part epoxy filler into the injection ports.
    Sealant
    Filler
    Container
    Size, fl. oz.
    Container
    Type
    Container
    Size, fl. oz.
    Container
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mix
    Ratio
    Color
    For Max.
    Crack Wd.
    Approx. Linear
    Coverage @ Thk.
    Application
    Temp. Range, ° F
    Process After
    Hardening
    For Use
    On
    Each
    34Jar10Cartridge1524Thin Liquid1:1Light Amber1/4"8 ft. @ 10"50 to 90Sand, TapConcrete75095T110000000

    Quick-Set Epoxy Structural Adhesives

    Image of Product. Syringe. Front orientation. Syringe.

    Syringe

    For quick repairs, these epoxies begin to harden in six minutes or less. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Gel—Stick in place and keep their exact shape with no flowing or sagging.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel
    Mix
    Ratio
    Consistency
    Viscosity
    Temp. Range,
    ° F
    For Joining
    Each
    Gorilla
    —0.84Syringe5 min.243,300Not Rated1:1Thick Liquid10,000 cP-10 to 200Glass, Metal, Plastic, Rubber, Wood7541A5100000
     
    Devcon
     
    5 Minute Epoxy
    142400.84Syringe5 min.482,5002 lbf/in. wd.1:1GelNot Rated-40 to 200Masonry, Metal, Plastic, Wood7592A3100000
    142500.84Syringe5 min.121,9002 lbf/in. wd.1:1Thick Liquid10,000 cP-40 to 200Masonry, Metal, Plastic, Wood7541A7600000
     
    Other Structural Adhesives
    —0.47Syringe4 min.242,500Not Rated1:1Gel13,000 cP-40 to 200Metal, Plastic, Rubber7670A2200000
    —1.65Syringe60 sec.32,50012 lbf/in. wd.1:1Thick Liquid15,000 cP-45 to 250Metal, Plastic, Rubber7541A8200000
     

    Optically Clear Epoxy Structural Adhesives

    Image of Product. Syringe. Front orientation. Syringe.

    Syringe

    For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, min.
    Shear,
    psi
    Peel
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    For Joining
    Each
    J-B Weld
     
    ClearWeld
    501120.85Syringe5602,000Not Rated1:1Thick Liquid10,000Metal, Plastic, Rubber, Wood7605A1800000
     

    Surface Fillers for Metal

    Image of Product. Front orientation. Surface Fillers. Surface Fillers for Metal, Epoxy, Syringe.

    Epoxy

    Syringe

    Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After Hardening
    For Use On
    Each
    Permatex Black Plastic Welder
    841450.8Syringe1024Thick LiquidYes1:11/8"Yes-60250BlackMachine, Drill, Sand, Saw, TapAluminum, Stainless Steel, Cast Iron74575A5600000
     

    Epoxy Structural Adhesives

    Image of Product. Syringe. Front orientation. Syringe.

    Syringe

    Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Each
    Devcon
     
    2 Ton Epoxy
    143100.84Syringe8162,25021:1Thick Liquid8,000-40 to 200Composite, Metal, Plastic, Metal to Composite, Metal to Plastic, Plastic to Composite7541A77000000
     
    Other Structural Adhesives
    —1.65Syringe50242,450261:1Thick Liquid40,000-45 to 250Metal, Plastic, Rubber7541A8300000
     

    High-Temperature Surface Fillers for Metal

    Image of Product. Front orientation. Surface Fillers. High-Temperature Surface Fillers for Metal, Epoxy, Syringe.

    Epoxy

    Syringe

    Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F. Fillers that have a mix ratio are multi-part fillers. The size listed is the combined total of the parts.
    Syringe—Surface fillers in a syringe come with everything you need to make repairs.
    Container
    Temp.
    Range, ° F
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    1.5Syringe2024PuttyYes9.1:11 in² @ 1/4"Not RatedYes-40500GrayMachine, Drill, SawAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass75325A1000000
     

    Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Surface Fillers , Epoxy, Syringe.

    Epoxy

    Syringe

    These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, min.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Loctite® Fixmaster Poxy Pak™
    EA 90170.8Syringe560Thick LiquidYes1:1Not Rated1/4"Yes-65300ClearSandAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Glass, Wood7556A33000000
     

    Waterproof Epoxy Structural Adhesives

    Image of Product. Syringe. Front orientation. Syringe.

    Syringe

    Even when used underwater, these adhesives maintain their strength. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
    These epoxies come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
    Container
    Strength
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Each
    J-B Weld
     
    ClearWeld
    501140.5Syringe511,500—1:1Paste9,000—Composite, Metal, Plastic, Rubber7605A2500000
     
    MarineWeld
    501720.85Syringe511,800Not Rated1:1Paste100,000-20 to 300Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood7605A700000
     
    Plastic Bonder
    501330.85Syringe611,700—1:1Paste100,000—Plastic7605A240000
     

    Water-Resistant Surface Filler Kits

    Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
    West System 105K
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Filler Kits.
    Includes
    Formulation
    Consistency
    For Use
    Outdoors
    Temp. Range,
    ° F
    Process After Hardening
    For Use On
    Each
    8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler
    0.1-oz. 406 Collodial Silica Filler
    0.1-oz. 410 Low-Density Filler
    Two Brushes
    Reusable Mixing Stick
    Three Mixing Cups
    15" × 15" Fiberglass Cloth
    Syringe Dispenser
    Three Pairs of Disposable Gloves    		EpoxyThin LiquidYes35 to 130Machine, Drill, Sand, Saw, TapAluminum, Steel, Stainless Steel, ABS, PVC, Fiberglass, Wood7480A51000000
    Replacement Parts
    Container
    Component
    No. of
    Pieces
    Mfr. Model
    No.
    Size
    Type
    Lg.
    Wd.
    Each
    Two-Part Epoxy6101-TS0.6 fl. oz.Single-Use Packet——7480A32000000
    Resin11051 qt.Can——7480A4100000
    Fast Hardener12057 fl. oz.Can——7480A4200000
    Slow Hardener12067 fl. oz.Can——7480A4300000
    Colloidal Silica Filler14061.7 fl. oz.Canister——7480A3300000
    Colloidal Silica Filler14065.5 fl. oz.Canister——7480A4400000
    Low-Density Filler14105 fl. oz.Canister——7480A4800000
    Mini Dispensing Pump3300————7480A4500000
    Fiberglass Cloth1745——30"30"7480A4700000

    Low-Odor Epoxy Structural Adhesives

    Image of Product. Syringe. Front orientation. Syringe.

    Syringe

    Even in enclosed or poorly ventilated spaces, these epoxies form bonds without the noticeable odor other structural adhesives leave behind.
    Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
    These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
    Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Container
    Strength
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Shear,
    psi
    Peel, lbf/in.
    wd.
    Mix
    Ratio
    Consistency
    Viscosity,
    cP
    Temp. Range,
    ° F
    For Joining
    Each
    1.65Syringe4242,200181:1Thick Liquid15,000-45 to 250Metal, Plastic, Rubber, Wood7541A84000000
     
    back to top