The flange keeps these inserts from being pulled through a hole and provides a load bearing surface.

Assortments include various sizes of tapping inserts for softwood.

Made from brass, these inserts are nonmagnetic, mildly corrosion resistant, and electrically conductive.

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water.

Steel inserts have high strength for durability.

Fewer prongs than other tee nut inserts reduce the risk of splitting hardwood—these inserts have three short prongs.

Hooked prongs give these inserts excellent holding power even when removing screws.

Mount these inserts flush or below the material's surface.

An open end allows long screws and bolts to pass through the insert.

Made of 18-8 stainless steel, these inserts have good corrosion resistance.

The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.

A black-phosphate finish provides mild corrosion resistance.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

A closed-end tap, drill bit, and installation bit are included with these inserts.

Eliminating the need for primer, these inserts are coated to resist corrosion when installed in different materials.

These inserts have a high strength-to-weight ratio and resist acids and salt water better than nickel alloy and stainless steel inserts.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

A dry film keeps the screw from sticking or binding in these inserts during installation.

A dry film keeps the screw from sticking or binding in these inserts during installation.

Kits include helical inserts, a tap, and an installation tool.

Inserts come with a through-hole tap and installation tool.

Install these inserts into plastic parts to create a secure base for fasteners.

The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.

Made from brass, these inserts are electrically conductive, nonmagnetic, and have good corrosion resistance.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

Made from brass, these inserts are nonmagnetic, corrosion resistant, and electrically conductive.

The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.

The barbed sides keep these securely in place even before a screw is installed.

These 18-8 stainless steel inserts have better corrosion resistance than aluminum inserts and may be mildly magnetic.

Press these inserts into a drilled hole and the flexible metal teeth anchor them in the material. Use them with carbon fiber, fiberglass, and garolite.

These nylon nuts are chemical resistant, nonconductive, and lightweight.

Stainless steel press-fit nuts have excellent corrosion resistance in most environments.

Also known as clinch style captive nuts, press these nuts into a drilled or punched hole with an arbor press or similar pressure tool.

These nuts have good chemical resistance and may be mildly magnetic.

These press-fit nuts have a nylon insert that grips threads to resist loosening.

These press-fit nuts are tin plated to resist corrosion from chemicals and salt water.

These rivet nuts are mildly corrosion resistant.

A PVC coating minimizes the chance of scratching the surface of your material. These rivet nuts are more corrosion resistant than zinc-plated steel rivet nuts.

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

About twice as strong as aluminum rivet nuts, these rivet nuts are zinc plated for mild corrosion resistance.

A hex-shaped body provides the highest twist resistance of any rivet nut.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

These screw-mount nuts are often used to attach glides and levels to wood.

A smooth base provides more contact with the mating surface than weld nuts with projections.

A smooth base on these metric nuts provides more contact with the mating surface than weld nuts with projections

Projections on the base concentrate the weld and provide room for heat to dissipate.

Threads float inside the retainer of these metric nuts so you can install a bolt at a slight angle to align with off center parts.

Projections on the base concentrate the weld and provide room for heat to dissipate.

These adhesive-mount nuts have a zinc plating for corrosion resistance in wet environments.

Weld these nuts to stainless steel surfaces.

You can weld these metric nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold.

Square weld nuts have more weld points than hex weld nuts for a stronger hold. Use them on flat surfaces.

Weld these nuts to stainless steel surfaces.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

About half the strength of medium-strength steel coupling nuts, these metric nuts are for light duty fastening applications.

Also known as lag shields, these anchors are designed for use with large-diameter wood screws.

A zinc plating provides corrosion resistance in wet environments.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Install like a stud anchor—just thread the anchor, a nut, and a washer onto the end of a threaded rod, drive into a hole, and turn the nut to expand the base. Also known as rod anchors, they're often used with threaded rod to hang pipe and wiring.

Also known as double expansion anchors, these expand from both sides for full contact and a secure hold.

For narrow holes and small cavities where toggle anchors won't fit.

A drilled hole is required for installation.

Fins prevent these anchors from spinning during installation.