Made of 18-8 stainless steel, these rivet nuts withstand water, mild chemicals, and outdoor conditions better than zinc-plated steel nuts. A ribbed body grips surrounding material to hold them in place, keeping them from spinning as you tighten screws.

Originally designed for Formula 1 racecars, these titanium rivet nuts are the best choice when you need a high strength-to-weight ratio—they're 40% lighter than steel nuts.

Our most twist-resistant round rivet nuts, these have both a ribbed body and wedges under the flange that bite into material to prevent spinning when tightening a screw. With a thick body for heavy duty applications, they match the strength of Grade 5 and Class 8 screws.

Irregularly shaped threads in these nuts form a tight grip, preventing screws from backing out in vibration-heavy environments.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

Add strong threads to sheet metal and other thin surfaces.

Made of stainless steel, these rivet nuts hold up better outdoors than zinc-plated steel rivet nuts.

To grip all layers of a sandwich panel—the top, core, and bottom—these rivet nuts have a two-piece construction.

The closed end on these nuts keeps debris from passing through the nut or damaging the threads.

A PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material.

To block out moisture and resist corrosion in wet environments, these steel rivet nuts have a PVC plastic flange and a zinc-plated body. Install them in sheet metal with only a screw, no special tools required.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

A neoprene rubber coating insulates the brass nuts in these assortments from electricity, seals out moisture, and dampens vibration.