Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.

With the male threaded end on these inserts, mount components directly to plastic parts.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These 18-8 stainless steel inserts have better corrosion resistance than aluminum inserts and may be mildly magnetic.

The barbed sides keep these securely in place even before a screw is installed.

Also known as Trisert inserts, these cut threads into plastic and have better holding power than press-fit inserts.

These inserts are made to stringent military specifications.

The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Eliminating the need for primer, these inserts are coated to resist corrosion when installed in different materials.

Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.

A dry film keeps the screw from sticking or binding in these inserts during installation.

Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.

Inserts come with a through-hole tap and installation tool.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

These assortments include various sizes of thread-locking inserts.

Large threads cut into softwood such as particleboard for a strong hold.

Made from brass, these inserts are nonmagnetic, mildly corrosion resistant, and electrically conductive.

These 18-8 stainless steel inserts have excellent resistance to chemicals and may be mildly magnetic.

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

Fewer prongs than other tee nut inserts reduce the risk of splitting hardwood—these inserts have three short prongs.

Six prongs around the barrel of these inserts provide a strong hold and prevent them from loosening and twisting.

An open end allows long screws and bolts to pass through the insert.

Mount these inserts flush or below the material's surface.

These nuts have good chemical resistance and may be mildly magnetic.

Also known as broach style captive nuts, these nuts have good chemical resistance and may be mildly magnetic.

These tools include everything you need to install press-fit nuts by hand.

The most corrosion resistant twist-resistant rivet nuts we offer, these stand up to chemicals.

A hex-shaped body provides the highest twist resistance of any rivet nut.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

The thread area is enclosed, which prevents leakage past the threads from either side of your application.

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

Weld these nuts to stainless steel surfaces.

Projections on the base concentrate the weld and provide room for heat to dissipate.

These nuts can be used in channels and tight spaces where round-base weld nuts won't fit.

Weld these nuts to stainless steel surfaces.

Weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.

Threads float inside the retainer so you can install a bolt at a slight angle to align with off center parts.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

Stainless steel snap-in nuts have excellent corrosion resistance in most environments.

Drive these tools with a hammer to expand anchors.

A drilled hole is required for installation.

These steel studs are zinc plated to resist corrosion in wet environments.

Add a stud to thin material when you only have access to one side.

18-8 stainless steel studs have good chemical resistance and may be mildly magnetic. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.

These studs have good chemical resistance. Weld them to stainless steel surfaces.

Create strong joints in wood and wood composite.

These include a barrel and a screw.

These include a barrel and a screw.

Stainless steel binding barrels and screws have excellent corrosion resistance in most environments.

A tamper-resistant Torx driver is required for installation and removal.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

Place the tip of these tools into an insert and strike them with a hammer to drive the keys into the material. They’re compatible with Keensert® inserts.

Screw an insert onto these tools and drive them a quarter to half-turn below the material's surface. They're compatible with helical inserts that have a prong.

Place the tip of these tools into an insert and strike a light blow to the tool’s head. Then turn the tools counterclockwise with pressure to extract the insert.

Thread these tools into an insert and turn counterclockwise to extract.

Compatible with Tap-Lok inserts.

Compatible with push-to-expand and Dodge inserts, these tools push down a plate inside the insert so the insert expands and stays secure in the surrounding material.