With the male threaded end on these inserts, mount components directly to plastic parts.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

A black-phosphate finish provides mild corrosion resistance.

Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

A distorted thread grips the screw to resist loosening.

Inserts come with a through-hole tap and installation tool.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

These assortments include various sizes of thread-locking inserts.

These 18-8 stainless steel inserts have excellent resistance to chemicals and may be mildly magnetic.

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

These metric nuts have good chemical resistance and may be mildly magnetic.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

A smooth base provides more contact with the mating surface than weld nuts with projections.

Weld these nuts to uncoated steel surfaces.

You can weld these metric nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold.

Stainless steel adhesive-mount nuts have excellent corrosion resistance in most environments.

Stainless steel nuts have excellent corrosion resistance in most environments.

316 stainless steel studs have excellent resistance to chemicals and salt water.

Place the tip of these tools into an insert and strike them with a hammer to drive the keys into the material. They’re compatible with Keensert® inserts.

Screw an insert onto these tools and drive them a quarter to half-turn below the material's surface. They're compatible with helical inserts that have a prong.

Place the tip of these tools into an insert and strike a light blow to the tool’s head. Then turn the tools counterclockwise with pressure to extract the insert.

Thread these tools into an insert and turn counterclockwise to extract.

Made of yellow zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.

Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Install these mounts on machines without feet.

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.