Made of high-strength calcium silicate, these durable sheets withstand high temperatures and are often used in power-generating applications.

These lightweight flexible fiberglass sheets are typically used to insulate equipment and appliances.

Thinner than most rigid insulation for furnaces and other high-heat applications, these millboard sheets are also used for gasket fabrication.

The lowest-density insulation we offer, these sheets are made of lightweight melamine foam.

Made of flexible composite paper, these sheets won't shrink or lose shape in the high temperatures of air furnaces and hot water tanks.

Typically used in ovens and furnaces, these are the most efficient of our rigid high-temperature insulation sheets. Please note that they require special care when installing since the crumbly material is difficult to work with and will crack easily. Sheets lose strength over time and are intended to be installed behind another facing or insulation material.

Designed for fluctuating, high-temperature applications, these semi-rigid sheets are typically used in furnaces and fire protection applications. They experience very little shrinkage at high temperatures, but the brittle material can be somewhat difficult to work with.

The fiberglass facing on these flexible silicone foam sheets protects against highly abrasive conditions and resists tearing.

Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications

Lightweight and super thin, these fiber-reinforced silica aerogel sheets and strips flex into tight spaces other insulation can't. Use on process piping and in power-generating applications.

Superior in strength and durability, these thin strips insulate as well as protect personnel from accidental contact with hot pipes. Use for exhaust, hot water, and process pipes.

Guard insulation from heavy impact and chemical exposure. This metal jacketing is corrosion resistant and often used outdoors.

Wrap pipes, tubing, and fittings to prevent condensation from forming. These strips are for use on copper, iron, and steel.

Made of rugged PVC foam, these rigid sheets absorb impact and restrict the absorption of water, air, and gas. Use in applications with operating temperatures below 32° F.

Typically used as duct wrap, these flexible sheets consist of polyethylene bubbles covered with aluminum polyester foil that prevent 96% of heat from radiating into or away from duct. Use on rectangular and round ductwork.

Also known as fire wrap, these flame-resistant sheets meet ASTM E84 0/0 for flame and smoke and create a fire barrier around rectangular and round ductwork. They are often used to wrap kitchen grease exhaust ducts and air ducts.

With more than twice the heat tolerance of standard FRP fiberglass, this material withstands temperatures up to 370° F.

This FRP fiberglass is made with a chemical-resistant resin that stands up to harsh environments.

Cushion electronic components from impact as you protect them from electrostatic shocks during shipping and storing.

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.

This insulation meets ASTM E162 for flame retardance and ASTM E662 for smoke output. Use to quiet noisy areas and line machine enclosures. Sheets are made of polyimide foam.

Also known as egg crate, these sheets have peaks and valleys that absorb more sound at higher frequencies than flat-surface sheets. Use them to quiet noisy areas and line machine enclosures. Sheets are made of humidity-resistant polyurethane foam.

Grommets along one side make it easy to install these sheets around your facility and quiet noisy areas. Made of vinyl-coated fiberglass, they resist abrasion, oil, dirt, moisture, and most solvents.

Furnished with two hangers for easy mounting around your facility, these sheets quiet noisy areas. Made of melamine foam, they are peaked on both sides for good sound absorption in large open spaces.

The best sound absorbers of all our rigid sheets, use to quiet noisy areas in your facility. They're peaked on one side for more sound-absorbing area than flat sheets. Made of melamine, they have an acrylic resin finish that resists dust and dirt and wipes clean.

Reflect sound and block noise from traveling to other parts of your facility.

Wrap these rubber blankets around power lines and electrical equipment to protect against contact with high voltage.

Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.

This traditional black cotton electrician's tape provides an abrasion-resistant shield for wrapping low-voltage splices.

In the event of a fire, this rubber tape expands to protect cables from flames and heat.

No need for adhesive—this tape fuses to itself for a permanent seal and stretches to fit virtually any form. Also known as cold shrink tape.

Also known as mastic tape, this tape is thicker than other electrical tape to cushion, insulate, and seal out moisture and environmental contaminants in electrical connections.

Low-pile velvet cushions surfaces and absorbs sound. Use it between parts and in acoustic applications.

Control the unwanted noise that comes from vibrating panels and support structures. This aluminum foil tape reduces vibration by converting it into a small amount of heat.

Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.

At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.