A carbide tip brazed onto a ground steel shank makes these tools less brittle than solid carbide tools.

Pair these holders with a threading insert or a grooving insert to make cuts on the inside of a hollow workpiece.

These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point.

Sized to cut oversized threads, these tools are often used to tap holes where the threads will shrink due to heat treatment or plating.

Tap threads for left-hand threaded fasteners.

Often used for thread repair and occasional hand tapping, these carbon steel taps can thread holes in most metal and plastic, but they have a shorter tool life than standard taps.

These taps cut left-hand threads while keeping chips clear.

Clear chips while tapping deep and hard-to-reach holes. These taps have an extra-long shank for extended reach.

The spiral flute design pulls chips back toward the tap, so chips won't accumulate in closed-end holes.

With a taper chamfer and bottoming chamfer at opposite ends, these taps start threads easily and are good for threading close to the bottom of closed-end holes.

With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers.

Tap threads into hardened steel and iron. These cobalt steel taps have straight flutes for high durability.

To tap nickel and other hard material, these cobalt steel taps have high cutting strength. Their flutes are designed to keep chips clear, so they don't need to be reversed to prevent buildup.

Create threads sized for pipe and conduit.

Tap left-hand threads for pipe and conduit.

With a taper chamfer on one threading end and a bottoming chamfer on the other, these pipe and conduit taps can start threads easily, and they are able to thread close to the bottom of closed-end holes.

Also known as interrupted-thread taps, these have extra space between the cutting threads, so large chips fall without packing and high amounts of lubricant can flow between the tap and the workpiece.

The spiral flutes on these pipe and conduit taps keep chips clear by drawing them back out of the hole, so there's no need to reverse the tap while cutting threads.

Cut threads in PG thread sizes commonly used for European conduit.

Insert the retriever into a tapped hole and pull out to remove chips.

These tools have adjustable blades to repair any inch or metric thread size. Use them on threaded holes with an ID from 5/16" to 1-1/4" or 8 mm to 32 mm.

One file restores a range of thread sizes in most hole diameters.

For occasional or light-duty hand tapping, connect a tap to these wrenches. They have long handles to provide more leverage than T-handle wrenches, but they require more space for tapping.

Sets include multiple holders for use with different tap sizes. These holders work like sockets to connect taps to ratchet wrenches.

With a T-handle design, these wrenches are more compact than straight-handle tap wrenches but provide less leverage.

Also known as hand tappers, these wrenches mount to a flat surface for stability and guide the tap straight into the hole for accurate threading.

Keep taps and drill bits organized. All holes are labeled with sizes. Taps and drill bits are not included.

Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.

Extend the length of your tap to access hard-to-reach areas.

After using a large-diameter bit to drill a starter hole in a broken tap, drill out the tap with one of these tools.

To extract taps of different sizes, these sets include multiple extractors. Use them with a tap wrench to remove taps with straight flutes from the workpiece without damaging the surrounding threads.

Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included.

Switch from internal to external threading with interchangeable tap and die adapters. Use them with the included ratcheting wrench.

For start-to-finish tapping of left-hand threads, these sets include one taper-, one plug-, and one bottoming-chamfer tap.

Multiple tap sizes allow tapping a range of hole diameters. Connect these taps directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank.

Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes.

All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers.

These kits have short-, normal-, and long-reach inserts, an installation tool, and a tap.