Position loads and maneuver with ease in tight spaces. Instead of long legs, these cranes are balanced with a counterweight in the back. The added room in front means you can push these cranes against surfaces to maximize the arm’s reach. No need for a hoist: a battery-powered hydraulic pump raises and lowers the arm to move loads. This means you can lift heavy parts regardless of whether an outlet’s nearby. To extend the reach of the arm – also known as the boom – manually adjust it between four positions. These cranes have an emergency stop button that quickly prevents them from moving any further if there's a risk of collision. Lock the caster wheels to keep them from rolling while lifting.

An extension cord is required to recharge the battery.

Warning: Never use to lift people or items over people.

Let these trucks do the lifting for you. A hydraulic pump raises and lowers loads at the touch of a button while a throttle controls forward and reverse speed. An automatic brake stops the truck when the handle is released. The truck also has a safety button that automatically reverses the direction of travel if the truck comes in contact with an obstacle. Operates for eight hours on a full charge when used intermittently. A discharge indicator lets you know when batteries need charging. The polyurethane wheels absorb shock to roll over rough floors and areas with debris.

Warning: Never use to lift people.

Lift and lower heavy loads with the push of a button—these trucks have a battery-powered hydraulic pump. They’re easier to use than manual lift trucks, since you don’t need to turn a crank or pump a pedal. You can also make finer height adjustments to position loads exactly where you need them. Two swivel casters at the rear of the lift truck make steering and pivoting easy. Adjust the width of the forks to fit pallets, skids, and other loads in many sizes.

Counterbalanced bases require a counterweight set (sold separately) to offset loads. Unlike straddle bases, they don’t have front-facing legs that can get in the way when you’re loading or unloading racks, trucks, or machinery.

Adjustable-width straddle bases have front-facing legs that sit on either side of your load for support. You can adjust the width to fit them around open and closed-bottom pallets. Those with a pivoting handle give you better leverage and control in tight spaces. The handle adjusts up or down.

Warning: Never use to lift people.

Platforms support material directly without an additional pallet. A hydraulic pump powered by a rechargeable battery raises and lowers loads with the push of a button. The push-button control has a self-retracting cord. Two swivel casters at the rear of the lift truck makes steering and pivoting easy. Once the truck is in place, engage the floor lock to lift and lower loads. They have nonmarking phenolic wheels that roll best on smooth surfaces.

Warning: Never use to lift people.

Raise and lower loads at the push of a button in cramped spaces like narrow aisles and crowded stockrooms. With a battery-operated hydraulic pump, these trucks make finer height adjustments than manual lift trucks. A compact body and four swivel casters give you maximum maneuverability—move them sideways, diagonally, or in circles with minimal effort. Load material right onto the platform—no pallet required. Plug these trucks into a standard wall outlet to charge the battery.

These trucks have wheel locks to stabilize them while you lift and lower loads. The wheels are rubber, so they’re quiet and shock absorbent. Use them on smooth and rough surfaces.

Warning: Never use to lift people.

Take your maintenance and repair tasks to new heights—these scissor lifts were built for reliability. Each part has been inspected and tested to ensure these lifts remain in service for over a decade. They’re designed to minimize hydraulic connections and cylinders to reduce failure points. Powered by a brushless motor, there’s no need for regular maintenance. Even the operation is no fuss—a single joystick controls both driving and elevation.

Their compact size and tight turn radius let you navigate through standard doorways and crowded spaces. Suitable for indoor and outdoor use, they’re made of powder-coated steel parts—even the pins and screws—and have waterproof connectors that stand up to the elements. Pothole guards keep them from tipping on uneven surfaces.

The platform supports up to 500 lbs. and is wide enough for two people to work comfortably side-by-side. Guardrails on each side meet fall-protection requirements. With three fall-restraint tie-off points, you have additional spots to anchor fall protection gear.

Note: Check local, state, and federal codes, including OSHA, for safe operating practices. Do not operate these lifts in winds over 25 mph. When used outdoors, only one person should be on them at a time.

Weigh materials sold by weight right from your forklift—these forks have an embedded scale that’s NTEP certified for accuracy. For easy viewing, clamp the remote display to your forklift’s dashboard or mast. The scale uses Bluetooth to send measurements. You can also link the scale to your smartphone or tablet to view, log, and export data from an app.

To measure the weight of your load alone, place an empty pallet on the forks and press the tare button. Then either load up the pallet or remove it and pick up a different, pre-loaded pallet with the forks. The scale also has tilt compensation, so it’s accurate even if the mast is not perfectly vertical.

Use these forks with any forklift equipped with an Industrial Truck Association (ITA) Class II carriage. They slide into forklift pockets just like any other forks. To minimize downtime, each fork has its own battery that lasts up to 75 hours on a single charge.

Forks cannot be sold to Canada due to energy efficiency regulations.

Warning: Distribute your load evenly across the forks to prevent overloading one side or the tips. Never use to lift people or items over people.