Thumb Jam Nuts | McMaster-Carr

Filter by

Product Family

Thumb Nuts

System of Measurement

Thread Size

Thumb Nut Profile

Nut Type

Material

Head Diameter

Height

Thumb Nut Grip Type

Collar Height

Finish

Collar Diameter

Thread Pitch

Width

Threading

Thread Spacing

Thread Type

Thread Direction

Thread Fit

Unified Standard Class 2B

Performance

Corrosion Resistant

High Torque

RoHS

Compliant

Compliant with Exemptions

DFARS Specialty Metals

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

Color

Specifications Met

262 Products

Thumb Nut Grip Type

Knurled Head

Get a good grip, even with oily fingers

256 products

Hex Head

Twist on by hand, then crank with a wrench for an extra-tight fit

6 products

Performance

Corrosion Resistant

Won't rust in wet and outdoor environments

219 products

High Torque

Fasten with a tool to apply extra torque and achieve an extra-tight fit

18 products

Low-Profile Knurled-Head Thumb Nuts

Twist these thumb nuts into spaces without a lot of clearance. They have a short, slip-resistant head, so you can grip them easily and make controlled adjustments in cramped spots. You can also use them as jam nuts by threading them against another nut to hold it in place.

Steel

Black-Oxide Steel—A dark, matte coating creates a finished look. These nuts offer minimal corrosion resistance, so they're best for dry environments.

		Collar
	Thread Size	Dia.	Ht.	Head Dia.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
Black-Oxide Steel



		10-32	1/2"	1/16"	3/4"	7/32"	—	1	92815A111	00000


		1/4"-20	1/2"	1/16"	3/4"	7/32"	—	1	92815A115	0000
		5/16"-18	1/2"	1/16"	3/4"	5/16"	—	1	92815A119	0000
		3/8"-16	1/2"	1/16"	3/4"	5/16"	—	1	92815A123	0000
		1/2"-13	3/4"	1/8"	1"	3/8"	—	1	92815A127	0000
		5/8"-11	3/4"	1/8"	1"	3/8"	—	1	92815A131	0000
		M4 × 0.7 mm	8 mm	0.5 mm	16 mm	4 mm	DIN 467	1	92815A201	0000
		M5 × 0.8 mm	10 mm	1 mm	20 mm	5 mm	DIN 467	1	92815A202	0000
		M6 × 1 mm	12 mm	1 mm	24 mm	6 mm	DIN 467	1	92815A203	0000
		M8 × 1.25 mm	16 mm	2 mm	30 mm	8 mm	DIN 467	1	92815A204	0000
		M10 × 1.5 mm	20 mm	2 mm	36 mm	10 mm	DIN 467	1	92815A205	0000


		M12 × 1.75 mm	20 mm	2 mm	36 mm	10 mm	DIN 467	1	92815A206	0000

Flanged Knurled-Head Thumb Nuts

The slip-resistant head is easy to grip, while the flange distributes pressure evenly across the mounting surface without the need for a separate washer. These nuts are often used to secure screws in oversized or irregularly shaped holes since the flange covers a larger area than standard nuts.

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They resist rust in wet and outdoor environments, but won't hold up to the harsh chemicals that 316 stainless steel can.

Passivated 18-8 Stainless Steel—With an added layer of protection, these nuts stand up to strong acids and other harsh chemicals.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant thumb nuts, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.

		Collar
	Thread Size	Dia.	Ht.	Head Dia.	Ht.	Threading	Thread Dp.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		0-80	5/32"	1/8"	7/32"	1/4"	Fully Threaded	—	1	95150A101	00000


		1-72	5/32"	1/8"	7/32"	1/4"	Fully Threaded	—	1	95150A102	0000
		2-56	3/16"	1/8"	1/4"	1/4"	Fully Threaded	—	1	95150A110	0000
		3-48	1/4"	1/8"	5/16"	1/4"	Fully Threaded	—	1	95150A103	0000
		4-40	1/4"	1/8"	5/16"	1/4"	Fully Threaded	—	1	95150A120	0000
		4-40	1/4"	1/8"	5/16"	5/16"	Partially Threaded	7/32"	1	95150A121	0000
		5-40	1/4"	1/8"	5/16"	1/4"	Fully Threaded	—	1	95150A104	0000
		6-32	11/32"	5/32"	3/8"	9/32"	Fully Threaded	—	1	95150A130	0000
		8-32	3/8"	5/32"	7/16"	9/32"	Fully Threaded	—	1	95150A140	0000
		8-32	3/8"	5/32"	7/16"	3/8"	Partially Threaded	1/4"	1	95150A123	0000
		10-24	13/32"	3/16"	1/2"	11/32"	Fully Threaded	—	1	95150A150	0000


		10-32	13/32"	3/16"	1/2"	11/32"	Fully Threaded	—	1	95150A160	0000
		12-24	13/32"	3/16"	1/2"	11/32"	Fully Threaded	—	1	95150A105	0000
		1/4"-20	15/32"	7/32"	9/16"	3/8"	Fully Threaded	—	1	95150A170	0000
		1/4"-20	15/32"	7/32"	9/16"	1/2"	Partially Threaded	5/16"	1	95150A124	0000
		1/4"-28	15/32"	7/32"	9/16"	3/8"	Fully Threaded	—	1	95150A106	0000
		5/16"-18	17/32"	7/32"	5/8"	13/32"	Fully Threaded	—	1	95150A180	0000
		5/16"-24	17/32"	7/32"	5/8"	13/32"	Fully Threaded	—	1	95150A107	0000
		3/8"-16	5/8"	1/4"	3/4"	15/32"	Fully Threaded	—	1	95150A190	0000
		3/8"-24	5/8"	1/4"	3/4"	15/32"	Fully Threaded	—	1	95150A108	0000
		7/16"-14	11/16"	5/16"	1"	17/32"	Fully Threaded	—	1	95150A109	0000


		7/16"-20	11/16"	5/16"	1"	17/32"	Fully Threaded	—	1	95150A112	0000
		1/2"-13	3/4"	3/8"	1"	5/8"	Fully Threaded	—	1	95150A113	0000
		M1.6 × 0.35 mm	4 mm	4 mm	6 mm	6 mm	Fully Threaded	—	1	96445A260	0000
		M1.6 × 0.35 mm	4 mm	4 mm	8 mm	6 mm	Fully Threaded	—	1	96445A270	0000
		M2 × 0.4 mm	4 mm	2 mm	6 mm	4 mm	Fully Threaded	—	1	96445A101	0000
		M2 × 0.4 mm	4 mm	4 mm	8 mm	6 mm	Fully Threaded	—	1	96445A280	0000
		M2.5 × 0.45 mm	4 mm	5 mm	12 mm	7 mm	Fully Threaded	—	1	96445A290	0000
		M2.5 × 0.45 mm	5 mm	3 mm	6 mm	6 mm	Fully Threaded	—	1	96445A320	0000
		M2.5 × 0.45 mm	6 mm	3 mm	8 mm	6 mm	Fully Threaded	—	1	96445A102	0000
		M3 × 0.5 mm	6 mm	3 mm	8 mm	6 mm	Fully Threaded	—	1	96445A330	0000


		M3 × 0.5 mm	6 mm	5 mm	16 mm	8 mm	Fully Threaded	—	1	96445A310	0000
		M3.5 × 0.6 mm	9 mm	4 mm	10 mm	7 mm	Fully Threaded	—	1	96445A340	0000
		M4 × 0.7 mm	8 mm	6 mm	12 mm	10 mm	Fully Threaded	—	1	96445A111	0000
		M4 × 0.7 mm	8 mm	6 mm	20 mm	10 mm	Fully Threaded	—	1	96445A112	00000
		M4 × 0.7 mm	9 mm	4 mm	10 mm	7 mm	Fully Threaded	—	1	96445A350	0000
		M5 × 0.8 mm	10 mm	7.5 mm	16 mm	12 mm	Fully Threaded	—	1	96445A113	0000
		M5 × 0.8 mm	10 mm	7.5 mm	24 mm	12 mm	Fully Threaded	—	1	96445A114	00000
		M5 × 0.8 mm	11 mm	5 mm	13 mm	9 mm	Fully Threaded	—	1	96445A360	0000
		M6 × 1 mm	12 mm	5 mm	13 mm	9 mm	Fully Threaded	—	1	96445A370	0000
		M6 × 1 mm	12 mm	10 mm	20 mm	15 mm	Fully Threaded	—	1	96445A115	00000


		M6 × 1 mm	12 mm	10 mm	24 mm	15 mm	Fully Threaded	—	1	96445A116	00000
		M8 × 1.25 mm	16 mm	6 mm	19 mm	12 mm	Fully Threaded	—	1	96445A380	0000
		M8 × 1.25 mm	16 mm	12 mm	24 mm	18 mm	Fully Threaded	—	1	96445A117	00000
		M8 × 1.25 mm	16 mm	12 mm	31.8 mm	18 mm	Fully Threaded	—	1	96445A118	00000
		M10 × 1.5 mm	20 mm	15 mm	26 mm	23 mm	Fully Threaded	—	1	96445A119	00000
		M10 × 1.5 mm	20 mm	15 mm	31.8 mm	23 mm	Fully Threaded	—	1	96445A121	00000
		M12 × 1.75 mm	24 mm	20 mm	31.8 mm	30 mm	Fully Threaded	—	1	96445A122	00000


		Black-Oxide 18-8 Stainless Steel



		2-56	3/16"	1/8"	1/4"	1/4"	Fully Threaded	—	1	95150A147	0000


		4-40	1/4"	1/8"	5/16"	1/4"	Fully Threaded	—	1	95150A148	0000
		6-32	11/32"	5/32"	3/8"	9/32"	Fully Threaded	—	1	95150A149	0000
		8-32	3/8"	5/32"	7/16"	9/32"	Fully Threaded	—	1	95150A151	0000
		10-24	13/32"	3/16"	1/2"	11/32"	Fully Threaded	—	1	95150A152	0000
		10-32	13/32"	3/16"	1/2"	11/32"	Fully Threaded	—	1	95150A153	0000
		1/4"-20	15/32"	7/32"	9/16"	3/8"	Fully Threaded	—	1	95150A154	0000
		5/16"-18	17/32"	7/32"	5/8"	13/32"	Fully Threaded	—	1	95150A155	0000
		3/8"-16	5/8"	1/4"	3/4"	15/32"	Fully Threaded	—	1	95150A156	0000
		M2.5 × 0.45 mm	5 mm	3 mm	6 mm	6 mm	Fully Threaded	—	1	96445A110	0000
		M3 × 0.5 mm	6 mm	3 mm	8 mm	6 mm	Fully Threaded	—	1	96445A130	0000


		M3.5 × 0.6 mm	9 mm	4 mm	10 mm	7 mm	Fully Threaded	—	1	96445A150	0000
		M4 × 0.7 mm	9 mm	4 mm	10 mm	7 mm	Fully Threaded	—	1	96445A170	0000
		M5 × 0.8 mm	11 mm	5 mm	13 mm	9 mm	Fully Threaded	—	1	96445A190	0000
		M6 × 1 mm	12 mm	5 mm	13 mm	9 mm	Fully Threaded	—	1	96445A220	0000
		M8 × 1.25 mm	16 mm	6 mm	19 mm	12 mm	Fully Threaded	—	1	96445A240	00000


		Passivated 18-8 Stainless Steel



				6-32	11/32"	5/32"	3/8"	9/32"	Fully Threaded	—	1	95150A139	0000


				8-32	3/8"	5/32"	7/16"	9/32"	Fully Threaded	—	1	95150A141	0000
				10-24	13/32"	3/16"	1/2"	11/32"	Fully Threaded	—	1	95150A142	0000
				10-32	13/32"	3/16"	1/2"	11/32"	Fully Threaded	—	1	95150A143	0000
				1/4"-20	15/32"	7/32"	9/16"	3/8"	Fully Threaded	—	1	95150A144	0000
				1/4"-28	15/32"	7/32"	9/16"	3/8"	Fully Threaded	—	1	95150A131	0000
				5/16"-18	17/32"	7/32"	5/8"	13/32"	Fully Threaded	—	1	95150A145	0000
				3/8"-16	5/8"	1/4"	3/4"	15/32"	Fully Threaded	—	1	95150A146	0000
				3/8"-24	5/8"	1/4"	3/4"	15/32"	Fully Threaded	—	1	95150A133	0000
				7/16"-14	11/16"	5/16"	1"	17/32"	Fully Threaded	—	1	95150A134	0000
				1/2"-13	3/4"	3/8"	1"	5/8"	Fully Threaded	—	1	95150A136	0000


				M2.5 × 0.45 mm	5 mm	3 mm	6 mm	6 mm	Fully Threaded	—	1	96445A120	0000
				M3 × 0.5 mm	6 mm	3 mm	8 mm	6 mm	Fully Threaded	—	1	96445A140	0000
				M4 × 0.7 mm	9 mm	4 mm	10 mm	7 mm	Fully Threaded	—	1	96445A180	0000
				M5 × 0.8 mm	11 mm	5 mm	13 mm	9 mm	Fully Threaded	—	1	96445A210	0000
				M6 × 1 mm	12 mm	5 mm	13 mm	9 mm	Fully Threaded	—	1	96445A230	0000
				M8 × 1.25 mm	16 mm	6 mm	19 mm	12 mm	Fully Threaded	—	1	96445A250	00000


				Highly Corrosion-Resistant 316 Stainless Steel



						4-40	1/4"	1/8"	5/16"	1/4"	Fully Threaded	—	1	99937A101	00000


						6-32	11/32"	5/32"	3/8"	9/32"	Fully Threaded	—	1	99937A102	00000
						8-32	3/8"	5/32"	7/16"	9/32"	Fully Threaded	—	1	99937A103	00000
						10-24	13/32"	3/16"	1/2"	11/32"	Fully Threaded	—	1	99937A104	00000
						10-32	13/32"	3/16"	1/2"	11/32"	Fully Threaded	—	1	99937A105	00000
						1/4"-20	15/32"	7/32"	9/16"	3/8"	Fully Threaded	—	1	99937A106	00000
5/16"-18						17/32"	7/32"	5/8"	13/32"	Fully Threaded	—	1	99937A107	00000
3/8"-16	5/8"					1/4"	3/4"	15/32"	Fully Threaded	—	1	99937A108	00000
1/2"-13	13/16"					1/4"	1"	1/2"	Fully Threaded	—	1	99937A109	00000

Brass

Brass—With a warm, polished look, these nuts are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments. It is also softer than other metals, so it's easier to thread together.

Zinc-Plated Brass—The zinc plating offers better corrosion resistance than plain brass to stand up to solvents and mild chemicals.

		Collar
	Thread Size	Dia.	Ht.	Head Dia.	Ht.	Threading	Pkg. Qty.		Pkg.
Brass



		0-80	5/32"	1/8"	7/32"	1/4"	Fully Threaded	1	92741A101	00000


		1-72	3/16"	1/8"	1/4"	1/4"	Fully Threaded	1	92741A201	0000
		2-56	3/16"	1/8"	1/4"	1/4"	Fully Threaded	1	92741A102	0000
		3-48	1/4"	1/8"	5/16"	1/4"	Fully Threaded	1	92741A202	0000
		4-40	5/16"	9/64"	3/8"	1/4"	Fully Threaded	25	92741A100	00000
		5-40	11/32"	5/32"	3/8"	9/32"	Fully Threaded	1	92741A203	0000
		6-32	5/16"	9/64"	3/8"	1/4"	Fully Threaded	25	92741A110	00000
		8-32	3/8"	3/16"	7/16"	5/16"	Fully Threaded	25	92741A120	00000
		10-24	7/16"	13/64"	1/2"	21/64"	Fully Threaded	10	92741A130	00000
		10-32	7/16"	13/64"	1/2"	21/64"	Fully Threaded	10	92741A140	00000
		12-24	1/2"	13/64"	9/16"	11/32"	Fully Threaded	10	92741A150	00000


		1/4"-20	9/16"	7/32"	5/8"	3/8"	Fully Threaded	10	92741A160	00000
		1/4"-28	15/32"	7/32"	9/16"	3/8"	Fully Threaded	1	92741A204	0000
		5/16"-18	39/64"	15/64"	11/16"	13/32"	Fully Threaded	10	92741A170	00000
		3/8"-16	5/8"	1/4"	3/4"	15/32"	Fully Threaded	1	92741A205	0000


		Zinc-Plated Brass



				8-32	3/8"	5/32"	7/16"	9/32"	Fully Threaded	1	92741A209	00000


				10-24	13/32"	3/16"	1/2"	11/32"	Fully Threaded	1	92741A210	00000
				10-32	13/32"	3/16"	1/2"	11/32"	Fully Threaded	1	92741A211	00000
				1/4"-20	15/32"	7/32"	9/16"	3/8"	Fully Threaded	1	92741A212	00000
				5/16"-18	17/32"	7/32"	5/8"	13/32"	Fully Threaded	1	92741A213	00000
				3/8"-16	5/8"	1/4"	3/4"	15/32"	Fully Threaded	1	92741A214	00000
				M2.5 × 0.45 mm	5 mm	3 mm	6 mm	6 mm	Fully Threaded	1	96115A410	0000
				M3 × 0.5 mm	6 mm	3 mm	8 mm	6 mm	Fully Threaded	1	96115A420	0000
				M3.5 × 0.6 mm	9 mm	4 mm	10 mm	7 mm	Fully Threaded	1	96115A480	0000
				M4 × 0.7 mm	9 mm	4 mm	10 mm	7 mm	Fully Threaded	1	96115A440	0000
				M5 × 0.8 mm	11 mm	5 mm	13 mm	9 mm	Fully Threaded	1	96115A450	0000


				M6 × 1 mm	12 mm	5 mm	13 mm	9 mm	Fully Threaded	1	96115A460	0000
				M8 × 1.25 mm	16 mm	6 mm	19 mm	12 mm	Fully Threaded	1	96115A470	0000

Knurled-Head Thumb Nuts

Get a good grip on these nuts, even with oily fingers. They have a raised, slip-resistant head, so you can tighten them by hand and make controlled adjustments. Knurled-head nuts have a smaller profile than wing nuts, so they fit in tighter spots.

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Collar
	Thread Size	Dia.	Ht.	Head Dia.	Ht.	Threading	Thread Dp.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		0-80	7/32"	3/16"	3/8"	1/4"	Fully Threaded	—	—	1	91833A101	00000


		1-72	7/32"	3/16"	3/8"	1/4"	Fully Threaded	—	—	1	91833A102	0000
		2-56	7/32"	3/16"	3/8"	1/4"	Fully Threaded	—	—	1	91833A103	0000
		3-48	1/4"	1/4"	1/2"	3/8"	Fully Threaded	—	—	1	91833A104	0000
		4-40	1/4"	1/4"	1/2"	3/8"	Partially Threaded	1/4"	—	1	91833A112	0000
		4-40	1/4"	1/4"	3/4"	3/8"	Fully Threaded	—	—	1	91833A141	0000
		4-40	1/4"	1/2"	1/2"	5/8"	Partially Threaded	3/8"	—	1	91833A148	0000
		4-40	1/4"	1/2"	3/4"	5/8"	Fully Threaded	—	—	1	91833A142	0000
		5-40	1/4"	1/4"	1/2"	3/8"	Fully Threaded	—	—	1	91833A105	0000
		6-32	1/4"	1/4"	1/2"	3/8"	Partially Threaded	9/32"	—	1	91833A116	0000
		6-32	1/4"	1/4"	3/4"	3/8"	Partially Threaded	9/32"	—	1	91833A118	0000


		6-32	1/4"	1/2"	1/2"	5/8"	Partially Threaded	11/32"	—	1	91833A149	0000
		6-32	1/4"	1/2"	3/4"	5/8"	Fully Threaded	—	—	1	91833A144	0000
		8-32	5/16"	1/4"	1/2"	3/8"	Fully Threaded	—	—	1	91833A121	0000
		8-32	5/16"	1/4"	3/4"	3/8"	Fully Threaded	—	—	1	91833A151	0000
		8-32	5/16"	1/2"	1/2"	5/8"	Partially Threaded	3/8"	—	1	91833A122	0000
		8-32	5/16"	1/2"	3/4"	5/8"	Partially Threaded	1/4"	—	1	91833A152	0000
		10-24	3/8"	1/4"	1/2"	7/16"	Fully Threaded	—	—	1	91833A125	0000
		10-24	3/8"	1/4"	1"	7/16"	Fully Threaded	—	—	1	91833A153	0000
		10-24	3/8"	1/2"	1/2"	11/16"	Fully Threaded	—	—	1	91833A145	0000
		10-24	3/8"	1/2"	1"	11/16"	Partially Threaded	1/4"	—	1	91833A154	0000


		10-32	3/8"	1/4"	1/2"	7/16"	Fully Threaded	—	—	1	91833A155	0000
		10-32	3/8"	1/4"	1"	7/16"	Fully Threaded	—	—	1	91833A132	0000
		10-32	3/8"	1/2"	1/2"	11/16"	Partially Threaded	1/4"	—	1	91833A156	0000
		10-32	3/8"	1/2"	1"	11/16"	Partially Threaded	1/4"	—	1	91833A157	0000
		12-24	1/2"	1/4"	3/4"	1/2"	Fully Threaded	—	—	1	91833A106	0000
		1/4"-20	1/2"	1/4"	3/4"	1/2"	Fully Threaded	—	—	1	91833A134	0000
		1/4"-20	1/2"	1/4"	1"	1/2"	Fully Threaded	—	—	1	91833A159	0000
		1/4"-20	1/2"	1/2"	3/4"	3/4"	Partially Threaded	1/4"	—	1	91833A158	0000
		1/4"-20	1/2"	1/2"	1"	3/4"	Partially Threaded	1/4"	—	1	91833A161	0000
		1/4"-20	1/2"	3/4"	1"	1"	Partially Threaded	1/2"	—	1	91833A138	0000


		1/4"-28	1/2"	1/4"	3/4"	1/2"	Fully Threaded	—	—	1	91833A107	0000
		1/4"-28	1/2"	1/2"	3/4"	3/4"	Fully Threaded	—	—	1	91833A146	0000
		5/16"-18	1/2"	3/8"	1"	5/8"	Fully Threaded	—	—	1	91833A108	0000
		5/16"-24	1/2"	3/8"	1"	5/8"	Fully Threaded	—	—	1	91833A109	0000
		3/8"-16	5/8"	1/2"	1"	3/4"	Fully Threaded	—	—	1	91833A113	00000
		3/8"-24	5/8"	1/2"	1"	3/4"	Fully Threaded	—	—	1	91833A114	00000
		7/16"-14	5/8"	3/4"	1 1/8"	15/16"	Fully Threaded	—	—	1	91833A115	00000
		7/16"-20	5/8"	3/4"	1 1/8"	15/16"	Fully Threaded	—	—	1	91833A117	00000
		1/2"-13	5/8"	3/4"	1 1/8"	15/16"	Fully Threaded	—	—	1	91833A119	00000
		1/2"-20	5/8"	3/4"	1 1/8"	15/16"	Fully Threaded	—	—	1	91833A147	00000


		M2 × 0.4 mm	5 mm	4 mm	10 mm	6 mm	Fully Threaded	—	—	1	90368A101	0000
		M2.5 × 0.45 mm	6 mm	5 mm	12 mm	7.5 mm	Fully Threaded	—	—	1	90368A102	0000
		M3 × 0.5 mm	6 mm	5 mm	12 mm	7.5 mm	Fully Threaded	—	DIN 466	1	90368A150	0000
		M3.5 × 0.6 mm	8 mm	6 mm	16 mm	9.5 mm	Fully Threaded	—	—	1	90368A104	0000
		M4 × 0.7 mm	8 mm	6 mm	16 mm	9.5 mm	Fully Threaded	—	DIN 466	1	90368A200	0000
		M5 × 0.8 mm	10 mm	7.5 mm	20 mm	11.5 mm	Fully Threaded	—	DIN 466	1	90368A250	0000
		M6 × 1 mm	12 mm	10 mm	24 mm	15 mm	Fully Threaded	—	DIN 466	1	90368A300	0000
		M8 × 1.25 mm	16 mm	12 mm	30 mm	18 mm	Fully Threaded	—	DIN 466	1	90368A325	0000
		M10 × 1.5 mm	20 mm	15 mm	36 mm	23 mm	Fully Threaded	—	DIN 466	1	90368A350	0000
		M12 × 1.75 mm	19 mm	12 mm	25.4 mm	22 mm	Fully Threaded	—	—	1	90368A103	0000

M14 × 2 mm	28 mm	20 mm	56 mm	30 mm	Fully Threaded	—	—	1	90368A105	00000
M16 × 2 mm	32 mm	25 mm	64 mm	35 mm	Fully Threaded	—	—	1	90368A106	00000

Black-Oxide 18-8 Stainless Steel



		2-56	7/32"	3/16"	3/8"	1/4"	Fully Threaded	—	—	1	92088A113	0000


		4-40	1/4"	1/2"	1/2"	5/8"	Partially Threaded	3/8"	—	1	92088A135	0000
		6-32	1/4"	1/4"	1/2"	3/8"	Partially Threaded	3/32"	—	1	92088A136	0000
		8-32	5/16"	1/4"	3/4"	3/8"	Fully Threaded	—	—	1	92088A142	0000
		8-32	5/16"	1/2"	3/4"	5/8"	Partially Threaded	1/4"	—	1	92088A143	0000
		10-24	3/8"	1/4"	1"	7/16"	Fully Threaded	—	—	1	92088A145	0000
		10-32	3/8"	1/2"	1/2"	11/16"	Partially Threaded	1/4"	—	1	92088A148	0000
		12-24	1/2"	1/4"	3/4"	1/2"	Fully Threaded	—	—	1	92088A122	0000
		1/4"-20	1/2"	1/4"	3/4"	1/2"	Fully Threaded	—	—	1	92088A152	0000
		1/4"-20	1/2"	1/4"	1"	1/2"	Fully Threaded	—	—	1	92088A154	0000
		1/4"-20	1/2"	3/4"	1"	1"	Partially Threaded	1/2"	—	1	92088A156	0000


		1/4"-28	1/2"	1/2"	3/4"	3/4"	Fully Threaded	—	—	1	92088A124	0000
		5/16"-18	1/2"	3/8"	1"	5/8"	Fully Threaded	—	—	1	92088A125	00000
		5/16"-24	1/2"	3/8"	1"	5/8"	Fully Threaded	—	—	1	92088A126	00000
		3/8"-16	5/8"	1/2"	1"	3/4"	Fully Threaded	—	—	1	92088A127	00000
		3/8"-24	5/8"	1/2"	1"	3/4"	Fully Threaded	—	—	1	92088A128	00000
		7/16"-14	5/8"	3/4"	1 1/8"	15/16"	Fully Threaded	—	—	1	92088A129	00000
		1/2"-13	5/8"	3/4"	1 1/8"	15/16"	Fully Threaded	—	—	1	92088A132	00000
		1/2"-20	5/8"	3/4"	1 1/8"	15/16"	Fully Threaded	—	—	1	92088A133	00000
		M2 × 0.4 mm	5 mm	4 mm	10 mm	6 mm	Fully Threaded	—	—	1	90368A107	0000
		M3 × 0.5 mm	6 mm	5 mm	12 mm	7.5 mm	Fully Threaded	—	DIN 466	1	90368A109	0000


		M4 × 0.7 mm	8 mm	6 mm	16 mm	9.5 mm	Fully Threaded	—	DIN 466	1	90368A111	0000
		M5 × 0.8 mm	10 mm	7.5 mm	20 mm	11.5 mm	Fully Threaded	—	DIN 466	1	90368A112	0000
		M6 × 1 mm	12 mm	10 mm	24 mm	15 mm	Fully Threaded	—	DIN 466	1	90368A113	0000
		M8 × 1.25 mm	16 mm	12 mm	30 mm	18 mm	Fully Threaded	—	DIN 466	1	90368A114	00000
		M10 × 1.5 mm	20 mm	15 mm	36 mm	23 mm	Fully Threaded	—	DIN 466	1	90368A115	00000
		M12 × 1.75 mm	19 mm	12 mm	25.4 mm	22 mm	Fully Threaded	—	—	1	90368A116	00000


		Highly Corrosion-Resistant 316 Stainless Steel



				4-40	1/4"	1/4"	1/2"	3/8"	Fully Threaded	—	—	1	92533A101	0000


				6-32	1/4"	1/4"	3/4"	3/8"	Fully Threaded	—	—	1	92533A102	0000
				8-32	5/16"	1/4"	1/2"	3/8"	Fully Threaded	—	—	1	92533A103	0000
				10-24	3/8"	1/4"	1/2"	7/16"	Fully Threaded	—	—	1	92533A104	0000
				10-32	3/8"	1/4"	1"	7/16"	Fully Threaded	—	—	1	92533A105	0000
				1/4"-20	1/2"	1/4"	3/4"	1/2"	Fully Threaded	—	—	1	92533A106	00000
				5/16"-18	1/2"	3/8"	1"	5/8"	Fully Threaded	—	—	1	92533A107	00000
				3/8"-16	5/8"	1/2"	1"	3/4"	Fully Threaded	—	—	1	92533A108	00000
				1/2"-13	3/4"	5/8"	1 1/8"	15/16"	Fully Threaded	—	—	1	92533A109	00000

Plastic

Reinforced Acetal—The best plastic for damp and wet environments, acetal won't swell or lose strength if exposed to moisture. These nuts are reinforced with an aluminum threaded insert, so they can handle more torque than other plastic nuts and won't crack during installation.

Nylon—These nuts thread on smoothly and resist abrasion to stand up to scratches and bumps. Nylon will swell and weaken when exposed to moisture, so it's best for dry environments.

		Collar
	Thread Size	Dia.	Ht.	Head Dia.	Ht.	Color	Threading	Insert Material	Pkg. Qty.		Pkg.
Reinforced Acetal



		4-40	9/32"	3/64"	5/16"	3/16"	Black	Fully Threaded	Aluminum	10	93886A101	00000


		6-32	23/64"	3/64"	3/8"	7/32"	Black	Fully Threaded	Aluminum	10	93886A110	0000
		8-32	25/64"	3/32"	1/2"	17/64"	Black	Fully Threaded	Aluminum	10	93886A120	00000
		10-24	31/64"	1/8"	5/8"	19/64"	Black	Fully Threaded	Aluminum	10	93886A102	00000
		10-32	31/64"	1/8"	5/8"	19/64"	Black	Fully Threaded	Aluminum	10	93886A130	00000
		1/4"-20	35/64"	1/16"	1"	23/64"	Black	Fully Threaded	Aluminum	10	93886A104	00000
		1/4"-20	35/64"	3/16"	3/4"	23/64"	Black	Fully Threaded	Aluminum	10	93886A140	00000
		1/4"-28	35/64"	1/16"	1"	23/64"	Black	Fully Threaded	Aluminum	10	93886A105	00000
		1/4"-28	35/64"	3/16"	3/4"	23/64"	Black	Fully Threaded	Aluminum	10	93886A103	00000
		5/16"-18	41/64"	1/8"	1"	27/64"	Black	Fully Threaded	Aluminum	10	93886A150	00000
		5/16"-24	41/64"	1/8"	1"	27/64"	Black	Fully Threaded	Aluminum	10	93886A210	00000


		M3 × 0.5 mm	9.1 mm	1.2 mm	9.6 mm	5.6 mm	Black	Fully Threaded	Aluminum	10	93886A220	0000
		M4 × 0.7 mm	9.9 mm	2.4 mm	13 mm	6.7 mm	Black	Fully Threaded	Aluminum	10	93886A230	00000
		M5 × 0.8 mm	11.5 mm	3.2 mm	16 mm	7.5 mm	Black	Fully Threaded	Aluminum	10	93886A240	00000
		M6 × 1 mm	13.6 mm	4.8 mm	19 mm	9.1 mm	Black	Fully Threaded	Aluminum	10	93886A250	00000
		M6 × 1 mm	14.3 mm	1.6 mm	26 mm	9.1 mm	Black	Fully Threaded	Aluminum	10	93886A260	00000
		M8 × 1.25 mm	16.3 mm	3.2 mm	26 mm	10.7 mm	Black	Fully Threaded	Aluminum	10	93886A270	00000


		Nylon



				6-32	1/4"	1/4"	1/2"	3/8"	Black	Fully Threaded	—	1	93995A300	0000


				6-32	1/4"	1/4"	3/4"	3/8"	Black	Fully Threaded	—	1	93995A380	0000
				8-32	5/16"	1/4"	1/2"	3/8"	Black	Fully Threaded	—	1	93995A320	0000
				8-32	5/16"	1/2"	1/2"	5/8"	Black	Fully Threaded	—	1	93995A330	0000
				10-24	3/8"	1/4"	1/2"	7/16"	Black	Fully Threaded	—	1	93995A340	0000
				10-32	3/8"	1/4"	1"	7/16"	Black	Fully Threaded	—	1	93995A350	0000
				1/4"-20	1/2"	1/4"	3/4"	1/2"	Black	Fully Threaded	—	1	93995A360	0000
				1/4"-20	1/2"	3/4"	1"	1"	Black	Fully Threaded	—	1	93995A370	0000

High-Torque Low-Profile Knurled-Head Thumb Nuts

Twist the slip-resistant head by hand, then insert a T-handle hex key into one of the holes to apply extra torque for a tight fit. Nuts have a low-profile head that fits into cramped spaces. You can also use them as jam nuts by threading them against another nut to hold it in place.

Steel

Black-Oxide Steel—A dark, matte coating creates a finished look. These nuts offer minimal corrosion resistance, so they're best for dry environments.

	Head Dia.	Ht.	No. of Holes	Hole Dia.		Each
Black-Oxide Steel



	10-24	3/4"	1/4"	4	3/32"	94775A021	00000


	1/4"-20	7/8"	1/4"	4	3/32"	94775A029	0000
	5/16"-18	1"	3/8"	4	3/16"	94775A030	0000
	3/8"-16	1"	3/8"	4	3/16"	94775A031	0000
	1/2"-13	1 1/8"	7/16"	4	7/32"	94775A033	0000
	5/8"-11	1 3/8"	1/2"	4	1/4"	94775A035	0000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Head Dia.	Ht.	No. of Holes	Hole Dia.		Each
18-8 Stainless Steel



	10-24	3/4"	1/4"	4	3/32"	91725A100	00000


	1/4"-20	7/8"	1/4"	4	3/32"	91725A110	0000
	5/16"-18	1"	3/8"	4	3/16"	91725A120	00000
	3/8"-16	1"	3/8"	4	3/16"	91725A130	00000
	1/2"-13	1 1/8"	7/16"	4	7/32"	91725A140	00000
	5/8"-11	1 3/8"	1/2"	4	1/4"	91725A150	00000

Hex-Head Thumb Nuts

Apply extra torque to these nuts to prevent accidental loosening. Twist them on by hand, then crank with a wrench for a tight fit. The flange distributes pressure evenly across the mounting surface without the need for a separate washer. These nuts are often used to secure screws in oversized or irregularly shaped holes since the flange covers a larger area than standard nuts.

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Collar
	Thread Size	Dia.	Ht.	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		4-40	1/4"	1/8"	5/16"	1/4"	1	94365A340	00000


		6-32	11/32"	5/32"	3/8"	9/32"	1	94365A350	0000
		8-32	3/8"	5/32"	7/16"	9/32"	1	94365A360	0000
		10-32	13/32"	3/16"	1/2"	11/32"	1	94365A380	0000
		1/4"-20	15/32"	7/32"	9/16"	3/8"	1	94365A390	0000
		5/16"-18	17/32"	7/32"	5/8"	13/32"	1	94365A400	0000